Electronics Related Meters
UT204+ 400A/600A Digital Clamp Meter
Product code: UT204-PLUS
The UT200+ series digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, featuring overload protection, high reliability, high safety and high accuracy. Offers a wide capacitance measurement range. Also features Neutral/live wire testing. Can be used to measure high-voltage frequency, temperature, AC/DC current, etc.
$139.40
AUD + GST
$153.34
AUD Inc. GST
UT202BT Smart AC Clamp Meter with Bluetooth
Product code: UT202BT
The UT202BT is a Bluetooth smart clamp meter designed with low pass filter mode, and inrush current detection, peak hold, and other traditional clamp meter functions. Button-style interface for one-handed operation. Dual display that shows voltage and current frequency at the same time. True RMS / 9999 counts.
$119.50
AUD + GST
$131.45
AUD Inc. GST
UT202+ Smart AC Clamp Meter
Product code: UT202-PLUS
The UT202BT is a smart clamp meter designed with low pass filter mode, and inrush current detection, peak hold, and other traditional clamp meter functions. Button-style interface for one-handed operation. Dual display that shows voltage and current frequency at the same time. True RMS / 9999 counts.
$79.40
AUD + GST
$87.34
AUD Inc. GST
UT196 1700V DC True RMS Professional Multimeter – Solar Pro
Product code: UT196
The T196 True RMS solar digital multimeter is an ideal tool for solar power system maintenance. This rugged meter is designed for technicians who work in rugged outdoor environments. The UT196 can measure up to 1700V DC and 1500V AC voltages, and 3000A AC current with an external current clamp sensor. Has IP65 protection and able to withstand 2m drop as well.
$289.40
AUD + GST
$318.34
AUD Inc. GST
UT195M Professional Multimeter - UT195M
Product code: UT195M
The UT195M is a handheld, industrial, True RMS digital multimeter designed find issues related to motor drive, factory equipment maintenance, electrical distribution, and repair etc. Provides LoZ voltage test, for ghost voltage measurement. Built with IP65 rating and has a 2m drop proof. Has a frequency testing range of 60Hz to 40MHz.
$309.10
AUD + GST
$340.01
AUD Inc. GST
UT195E Professional Multimeter - UT195E
Product code: UT195E
The UT195M is a handheld, industrial, True RMS digital multimeter designed find issues related to motor drive, factory equipment maintenance, electrical distribution, and repair etc. Provides LoZ voltage test, for ghost voltage measurement. Built with IP65 rating and has a 2m drop proof. Has a frequency testing range of 60Hz to 10MHz.
$249.40
AUD + GST
$274.34
AUD Inc. GST
UT195DS Professional Multimeter - UT195DS
Product code: UT195DS
The UT195DS is a handheld, industrial, True RMS digital multimeter designed find issues related to motor drive, factory equipment maintenance, electrical distribution, and repair etc. Provides LoZ voltage test, for ghost voltage measurement as well as AC voltage (V) measurement. Built with IP65 rating and has a 2m drop proof. Has a frequency testing range of 60Hz to 40MHz.
$359.00
AUD + GST
$394.90
AUD Inc. GST
UT18B PRO 1000V True RMS Digital Multimeter
Product code: UT17B-PRO
The UT17B-PRO is a ighly reliable, safe, and durable True RMS multimeter. Equipped with built-in VFC, it can filter interference, resulting in a more accurate voltage reading. Comes with gold-plated test leads for quick and precise measurement. Provide complete range 1000V protection, as well as 8kV transient voltage protection. With built-in flashlight and automatic flashlight.
$209.40
AUD + GST
$230.34
AUD Inc. GST
UT136C+ Digital Multimeter - UT136C-PLUS
Product code: UT136C-PLUS
The UT136+ is a new generation of Uni-T multimeters for AC Voltage and Resistance measurement. Measures up to 1000V and 10A AC/DC voltage and current and can also measure temperature. Has a quick measuring time and sampling rate. Up to 500 hours of battery life.
$149.80
AUD + GST
$164.78
AUD Inc. GST
UT12M AC Voltage Detector - UT12M
Product code: UT12M
The UT12M is a professional grade voltage detector designed to be used in the harsh environments. This model can also be used to detect magnetic fields. With Magnetic solenoid detection mode. IP67 dust/water resistant and can withstand 2 meters drop. Built with Audible (buzzer) and visual (LED) indication.
$47.00
AUD + GST
$51.70
AUD Inc. GST
UT12E AC Voltage Detector - UT12E
Product code: UT12E
The UT12E is a professional grade voltage detector designed to be used in the harsh environments. Wit a Frequency Range of 50/60Hz. IP67 dust/water resistant and can withstand 2 meters drop. Built with Audible (buzzer) and visual (LED) indication.
$41.00
AUD + GST
$45.10
AUD Inc. GST
UT125C Pocket Size Digital Multimeter - UT125C
Product code: UT125C
The UT125C is a pocket size, ergonomic and reliable multimeter with 4000 display counts and performs resistance/capacitance/diode/continuity testing. Appropriate for low currents (less than 0.4A). CE/cETLus certified and complies with CAT III 600V. Small size, easy to carry and operate.
$69.20
AUD + GST
$76.12
AUD Inc. GST
UT105 Automobile Multimeter - UT105
Product code: UT105
The UT105 is specially designed for automobiles diagnostic. It combines RPM, DWELL, and other multimeter functions into one hand-held device. Useful for automobile maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Can be used to diagnose fuse, switch, solenoid, relay, charging system, fuel system, engine sensing etc.
$79.20
AUD + GST
$87.12
AUD Inc. GST
PoE Pro Tester - IC-R158006
Product code: IC-R158006
The PoE Tester is a multifunction tool that identifies the Class of the PoE source, injector type and power available to a PoE device regardless of cable length, cable quality or other factors. Identifies the PoE source, class, IEEE standard and power available during installation, troubleshooting or maintenance. Test results are stored in real-time on the free AnyWARE mobile app and are seamlessly uploaded to AnyWARE Cloud where professional PDF reports are generated. Also detects cabling issues and can troubleshoot devices up to 90W.
$1,369.20
AUD + GST
$1,506.12
AUD Inc. GST
NAVITEK NT PLUS - IC-R151005
Product code: IC-R151005
The new NaviTEK NT Plus is a network tester for troubleshooting and maintenance of active and passive copper networks with touch screen. Has an autotest button that performs a suite of network tests (Ping, DNS, Gateway, Traceroute). Network Probe provides detailed port and network information of each device. Internal memory for 5000 test reports.
$2,259.00
AUD + GST
$2,484.90
AUD Inc. GST
NAVITEK NT Pro Bundle - IC-NTEK-KIT
Product code: IC-NTEK-KIT
This bundle includes the NaviTEK NT Pro for troubleshooting and maintenance of active and passive copper and fiber networks. It includes active remotes and amplifier probe. The NaviTEK NT Pro performs tests for copper cablings and networks with a fiber optic cable interface. Provides PoE/PoE+ detection with load test. Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan.
$2,999.40
AUD + GST
$3,299.34
AUD Inc. GST
R164061 FiberTEK III LC Adapter Kit - IC-R164061
Product code: IC-R164061
The multimode R164061 accessory kits allow one-jumper calibration when testing cabling systems with LC connectors. The kits utilize a precision LC adapter for the receive (Rx) port of each FiberTEK III module and a SC-LC test cord for the transmit (Tx) port. One-jumper calibration recommended by most standards for field testing. Procedure is the same for MM and SM testing.
$12,569.90
AUD + GST
$13,826.89
AUD Inc. GST
FiberTEK IV-MM LED and SM Laser Kit - IC-R164010
Product code: IC-R164010
FiberTEK IV combination MM/SM kit with LED MM sources and laser SM sources. FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing. Flashes red to warn of light from other sources, green when linked to FiberTEK IV. Red laser light source to visually pinpoint faults and locate fiber ports. Supports all common connector types. Compatible with all LanTEK IV models.
$18,299.50
AUD + GST
$20,129.45
AUD Inc. GST
LanTEK IV-S 3000MHz Cable Certifier (With PL/CL Adapters) - IC-R163009
Product code: IC-R163009
The LanTEK IV-S R163009 is a 3000MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$18,299.30
AUD + GST
$20,129.23
AUD Inc. GST
LanTEK IV-S 500MHz Cable Certifier (With PL/CL Adapters) - IC-R163008
Product code: IC-R163008
The LanTEK IV-S R163008 is a 500MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$16,559.80
AUD + GST
$18,215.78
AUD Inc. GST
Kyoritsu 6205PRO hand held portable appliance tester with in-built Wireless connectivity
Product code: 6205PRO
The Kyoritsu 6205PRO is a hand-held tester designed for convenient and fast testing of portable appliances, extension leads, and RCD’s to AS/NZS 3760 Standards. It is a fully wireless easy-to-use device, designed to make testing and tagging of equipment easier and faster. In addition to transferring test results immediately, the App provides you with asset information, such as serial numbers, numbers, appliance descriptions, and locations, so that you can manage assets seamlessly.
$4,009.40
AUD + GST
$4,410.34
AUD Inc. GST
Kyoritsu 5711 Voltage Detector
Product code: 5711
Pen voltage detector. Senses AC voltage through insulation, buzzer sounds and tip glows upon ac voltage detection.
$79.90
AUD + GST
$87.89
AUD Inc. GST
Kyoritsu 4118A Digital Loop Impedance Earth Tester
Product code: 4118A
The Kyoritsu 4118A is a digital loop impedance tester that is able to measure prospective short current (PSC). Designed to comply with an IP54 rating, the 4118A is comprised of a custom microprocessor to achieve high accuracy and reliability.
$859.60
AUD + GST
$945.56
AUD Inc. GST
Kyoritsu 4106 Ground Resistance and Earth Tester
Product code: 4106
Kyoritsu 4106 is a 2/ 3/ 4-wire digital earth resistance/earth resistivity tester, equipped with a microcomputer, for measuring earth resistances and calculating earth resistivities.
$4,249.70
AUD + GST
$4,674.67
AUD Inc. GST
Kyoritsu 4105DL-H Earth Tester - Hard Case Model
Product code: 4105DL-H
The Kyoritsu 4105DL-H is a digital earth tester, capable of testing earth resistance up to 2000Ω. This can be achieved via the 2 pole or 3 pole method with the supplied accessories.
$1,249.20
AUD + GST
$1,374.12
AUD Inc. GST
Kyoritsu 4105DL Earth Tester
Product code: 4105DL
Kyoritsu 4105DL Earth Tester. 3 pole and 2 pole Earth Resistance measurement (0.01Ω-2000Ω) with waterproof design (IP67).
$1,459.40
AUD + GST
$1,605.34
AUD Inc. GST
Kyoritsu 4105A Earth Resistance Tester - Soft Case Model
Product code: 4105A
The Kyoritsu 4105A digital tester performs three-pole earth resistance and two-pole voltage testing of electrical equipment and systems wiring and grounding to reduce power quality issues and avoid safety hazards. The meter is small and lightweight, with shock-resistant case material and taut-band movement.
$1,119.80
AUD + GST
$1,231.78
AUD Inc. GST
Kyoritsu 4102A-H Earth Resistance Tester - Hard Case Model
Product code: 4102A-H
The Kyoritsu 4102A-H tester performs three-pole earth resistance and two-pole voltage testing of electrical equipment and systems wiring and grounding to reduce power quality issues and avoid safety hazards. The meter is small and lightweight, with shock-resistant case material and taut-band movement.
$1,059.80
AUD + GST
$1,165.78
AUD Inc. GST
Kyoritsu 4102A 2/3 Pole Earth Resistance Tester
Product code: 4102A
The Kyoritsu 4102A is an analogue earth tester, capable of testing earth resistance up to 1200Ω. This can be achieved via the 2 pole or 3 pole method with the supplied accessories.
$969.30
AUD + GST
$1,066.23
AUD Inc. GST
Kyoritsu 3552 Digital Continuity and Insulation Tester with Memory Function and Bluetooth
Product code: 3552BT
Digital continuity and insulation tester with memory function and Bluetooth. Offers full protection against accidental connection to a live circuit, and this insulation resistance tester also delivers the fastest result with 0.5 seconds measurement speed.
$1,449.30
AUD + GST
$1,594.23
AUD Inc. GST