ADVANCED GEO EARTH GROUND TESTER, KIT - IC-FLUKE-1625-2 KIT
Backorder Now, once ordered your item will dispatch before the 29th of April 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
The Fluke 1625-2 offers you simpler, faster earth ground tests than ever before. The 1625-2 offers internal memory storage up to 1500 records, accessible via USB port for rapid data transfer and viewing of results.Includes 2 Clamps, C1620 Professional Carrying Case, 4 Earth Ground Stakes and 3 Cable Reels.
Regular price
$9,170.00 AUD
+ GST
$10,087.00 AUD Inc. GST
$10,087.00 AUD Inc. GST
The Fluke 1625-2 earth ground tester is able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod. This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall of Potential test method must be used.
With Stakeless testing, the earth ground rod does not need to be disconnected - leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system - a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil.
Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
Adjustable limits - for quicker testing
3- and 4-pole Fall-of-Potential, earth resistance loop testing
4-pole Soil Resistivity testing
Selective earth ground rod testing using 1 clamp
Stakeless earth ground rod testing using 2 clamps
IP56 rated for outdoor use
Rugged carrying case
USB data storage and transfer
Accessory kits:
Stake Set for 3-Pole Measurement
Stake Set for 4-Pole Measurement
Cables and hardware:
Ground/Earth Cable Reel 25 m (81.25 ft)
Ground/Earth Cable Reel 25 m (81.25 ft)
Ground/Earth Cable Reel 50 m (162.5 ft)
Current clamps
Clip-on Current Transformer (Inducing)
EI-162BN 320 mm Diameter Split Core Transformer
Clip-on Current Transformer (Sensing) with Shielded Cable Set
Selective/Stakeless Clamp Set
Other accessories
Ground/Earth Stake 2
Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
Adjustable limits - for quicker testing
3- and 4-pole Fall-of-Potential, earth resistance loop testing
4-pole Soil Resistivity testing
Selective earth ground rod testing using 1 clamp
Stakeless earth ground rod testing using 2 clamps
IP56 rated for outdoor use
Rugged carrying case
USB data storage and transfer
Accessory kits:
Stake Set for 3-Pole Measurement
Stake Set for 4-Pole Measurement
Cables and hardware:
Ground/Earth Cable Reel 25 m (81.25 ft)
Ground/Earth Cable Reel 25 m (81.25 ft)
Ground/Earth Cable Reel 50 m (162.5 ft)
Current clamps
Clip-on Current Transformer (Inducing)
EI-162BN 320 mm Diameter Split Core Transformer
Clip-on Current Transformer (Sensing) with Shielded Cable Set
Selective/Stakeless Clamp Set
Other accessories
Ground/Earth Stake 2
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au