Advanced Model Surface Roughness Meter - IC-RTD-300
This product is not in stock and will only be ordered as required. Please check out the RTD-210 as an alternative.
The Starr Instruments Surface Roughness Gauge RTD-300 is an advanced model with separate stylus and motor drive unit for greater access into tight spaces allowing tests on even more surfaces. Advanced data capabilities show the waveform graph on the LCD screen which can be saved into memory for further analysis.
Regular price
$2,399.30 AUD
+ GST
$2,639.23 AUD Inc. GST
$2,639.23 AUD Inc. GST
Note: This product is not on stock and will only be ordered as required. Please check out the
RTD-210 as an alternative.
The advanced surface roughness gauge RTD-300 from Starr Instruments is designed to allow testing of more difficult to access work pieces and has superior data capabilities to be a comprehensive testing device.
The separate stylus housing allows for measuring the roughness of inside or outside of bores on small diameter pipe or tube, stepped gears, o-ring grooves and recessed notches. Industry examples include measuring roughness of cylinder heads or brake discs in Automotive or Rail Tracks after refurbishment and maintenance.
To measure roughness the RTD-300 uses a diamond tipped stylus that accurately traces the surface of the material by measuring the vertical deviations from a uniform centre line and is able to display the results under many parameters including Ra, Rz, Rq, Rp, Rv, Rsk, Rmr to name a few. The results are displayed on the large, high resolution, colour LCD including the waveform trace of the surface and results can be saved to internal memory and managed with the optional software.
Features:
Colour TFT LCD Touch Screen
USB and RS-232 data
Wide measuring range 400m
Advanced roughness parameters
High accuracy inductance pick up
Separate stylus housing and fly lead for accessibility.
Mag stand to assist with measurement
Maximum Travel: 17.5mm
Indicating Error: 10%
Variation of Indication: 6%
Measured Profile: Roughness, Waviness, Contour
Parameter: Ra (0.005m-16m) Rz (0.02m-160m)
Parameter: Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rsu, Rsm,Rmr, Rx
Filter: RC, PC-RC, Gauss, ISO13565
Sampling Length "L": 0.25mm, 0.8mm, 2.5mm, 8mm
Evaluation Length: (1-5)L
Interface: USB
Power: Built in rechargeable battery
Detection Principle: Current induction
Stylus Force: 4mN (0.4gf)
Stylus Angle: 90
Calibration Template: included
The separate stylus housing allows for measuring the roughness of inside or outside of bores on small diameter pipe or tube, stepped gears, o-ring grooves and recessed notches. Industry examples include measuring roughness of cylinder heads or brake discs in Automotive or Rail Tracks after refurbishment and maintenance.
To measure roughness the RTD-300 uses a diamond tipped stylus that accurately traces the surface of the material by measuring the vertical deviations from a uniform centre line and is able to display the results under many parameters including Ra, Rz, Rq, Rp, Rv, Rsk, Rmr to name a few. The results are displayed on the large, high resolution, colour LCD including the waveform trace of the surface and results can be saved to internal memory and managed with the optional software.
Features:
Colour TFT LCD Touch Screen
USB and RS-232 data
Wide measuring range 400m
Advanced roughness parameters
High accuracy inductance pick up
Separate stylus housing and fly lead for accessibility.
Mag stand to assist with measurement
Specifications
Maximum Travel: 17.5mm
Indicating Error: 10%
Variation of Indication: 6%
Measured Profile: Roughness, Waviness, Contour
Parameter: Ra (0.005m-16m) Rz (0.02m-160m)
Parameter: Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rsu, Rsm,Rmr, Rx
Filter: RC, PC-RC, Gauss, ISO13565
Sampling Length "L": 0.25mm, 0.8mm, 2.5mm, 8mm
Evaluation Length: (1-5)L
Interface: USB
Power: Built in rechargeable battery
Detection Principle: Current induction
Stylus Force: 4mN (0.4gf)
Stylus Angle: 90
Calibration Template: included
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au