Barcol 934

ORDER ME IN
Product code: Barcol-934

Backorder Now, once ordered your item will dispatch before the 02nd of May 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).

Material Hardness Tester for Fibreglass, Hard Plastics, Aluminium, Brass and Copper
Regular price $1,099.00 AUD + GST
$1,208.90 AUD Inc. GST

Barcol 934 - Complies with the requirements of AS/NZS 3572.22 for: Fibreglass, Hard plastics, Aluminium & its Alloys, Brass and Copper.

 

Features
Portable. Easy to use. Can be used in any position and in any space that will allow for an operators hand.

Hardness is instantly indicated on the dial, which is divided into 100 graduations.

Best suited for testing homogeneous materials. Materials of granular, fibrous or coarse structure will produce a wide variation in hardness readings because of the small diameter of the indenter point. For accurate readings, materials should be large enough for a minimum distance of 3mm in any direction from the indenter point to the edge of the specimen. The test area should be smooth and free from mechanical damage.

The Barcol is used by simply exerting light pressure against the instrument to drive the spring loaded indenter point into the material. The indenter point must be perpendicular to the surface being tested.

Conversion curves for the 934 are available. They are not available for the 935, because physical characteristics of very soft materials are such that uniform correlation between different hardness measuring systems cannot be established.
Supplied with - Two spare indenter points, test disc(s), adjusting wrench & carry case.


Specifications

Range: 35 to 100 Barcol
Weight: 500g


Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au