Home > CAP10CNR1500F Industrial Fuel Level Sensor
Daviteq

CAP10CNR1500F Industrial Fuel Level Sensor

DISCONTINUED
Product code: CAP10CNR1500F

For a personalised quote, add to cart. Then in the checkout choose create a quote.

The CAP10CNR1500F is an industrial-grade fuel level sensor for generators or stationary fuels tanks that can be connected easily to any industrial devices like PLC, IoT Gateway, or iConnector.

-High accuracy (0.1%).

-Can be used with tanks up to 30 litres in volume.

-With M12-Female connector and 4-20mA output.

Read more

Features:
- 99.9% Accuracy: Patented digital capacitance measuring technique PulseCAP10 of Daviteq allows for high accuracy
- Easy calibration: Easy calibration for any fluid with just a push of a button
- Industrial Output Signals: RS485/modbusRTU output for easy connecting to PLC, controller, SCADA, BMS
- Shorten to 100mm only: Allow to cut as short as 100mm length
- Extend up to 4000mm: Easy extend to 4000 mm by adding extension probes

Specifications

- Sensor length standard: 1500mm, extend to 4000mm (by extension probe) or cut down to 100mm
- Output: 4-20mA
- Power supply: 8 to 50VDC
- Consumption: max 35mA
- Working pressure: -1 to 2 barg
- Working temperature: -40 to 85 C
- Accuracy: +/- 0.1% of span (at 25 C)
- Temperature drift: less than 0.03% of span per 10 C
- Resolution: 1/1000 of span
- Sensor materials: Alloy and Engineering plastic
- Electrical connection connector: M12 (matched connector and cable must be ordered separately)
- Housing Cast: aluminum, IP67 protection
- Process connection: Plastic flange
- Standard accessories: flange, o-ring, gasket, protection covers, self-tapping screws, twisted seal
- Certification: CE-Marking per EN61236-1 (with test report)

Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au