- Enables high voltage measurement up to CAT III 2000 V
- Safely measure solar installations like the mega-solar without interrupting the grid by simply connecting the DC High Voltage Probe P2000 to compatible Hioki clamp meters and digital multimeters (DMMs)
- Automatic hold function
-Measure DC voltages of up to 2000 V for open voltage inspections of solar panels
- Simultaneously measure inrush current in RMS and crest values
- Automatic AC/DC function helps boost work efficiency
- The clamp meters can simultaneously measure inrush current in RMS as well as maximum crest values at motor startup and for welding currents
- DC Current range: 600.0 A/2000 A, Basic accuracy: +/- 1.3% rdg. +/- 0.3 A (600 A range)
- AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45 to 66 Hz: +/- 1.3% rdg. +/- 0.3 A (at 600 A)
- Crest factor: 600.0 A range: 3 or less / 2000 A range: 2.84 or less
- DC+AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45 to 66 Hz: +/- 1.3% rdg. +/- 1.3 A (at 600 A)
- DC Voltage range: 600.0 V to 1000 V (When using P2000: 600.0 V to 2000 V)
- AC Voltage range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 to 66 Hz: +/- 0.9% rdg. +/- 0.003 V (at 6 V)
- DC+AC Voltage range: 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 to 66 Hz: +/- 1.0% rdg. +/- 0.013 V (at 6 V)
- Resistance range: 600.0 ohms to 6.000 milliohms, 5 ranges, Basic accuracy: +/- 0.7% rdg. +/- 0.5 ohms (at 600 ohms)
- Capacitance range: 1.000 uF to 1000 uF, 4 ranges, Basic accuracy: +/- 1.9% rdg. +/- 0.005 uF (at 1 uF)
- Frequency range: 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: +/- 0.1% rdg. +/- 0.003 Hz (at 9.999 Hz)
- Temperature (K): -40.0 to 400.0 C, add temperature probe accuracy to basic accuracy of +/- 0.5% rdg. +/- 3.0 C
- Voltage detection Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz
- Other functions: DC power, Continuity check, Diode check, Automatic AC/DC detection, Pass/fail judgement function of DC A and DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Low-pass filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment, etc.
- Dustproof, waterproof: IP54 (Storage or measurement of current of an insulated conductor)
- Power supply: LR03 Alkaline battery x2
- Continuous use: 40 hr (without Z3210 installed), 24 hr. (with Z3210 installed and using wireless communications)
- Other conditions: 100 A AC measurement, backlight off, 23 C reference value
- Core jaw diameter: 55 mm diameter, Jaw dimension: 92 mm x 18 mm
- Dimensions and mass: 65 x 250 x 35 mm, 530 g
- Included accessories: Test Lead L9300, Carrying Case C0203, LR03 Alkaline battery x2, Instruction Manual x2, Operating Precautions x1
