Hobo U30 Shuttle Data Transporter
Backorder Now, once ordered your item will dispatch before the 29th of May 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
The HOBO U-DT-2 U30 Shuttle Data Transporter provides convenient in-field data offload and relaunch of HOBO U30-NRC systems and HOBO Weather Stations (H21), Micro Stations, and HOBO Energy Logger Pro systems (H22). The U30 Shuttle's 2 x 16-character display shows current readings (for selected loggers), and logger status. |
   |
Features:
Reads out data from systems in the field for transfer to a host computer.
Optionally relaunches the logger; synchronizes the loggers clock with the shuttle clock and (in most cases) sets logging to begin at the next interval.
Preserves data in nonvolatile memory, even if batteries are depleted.
Displays logger status, including memory, battery level, and sensor readings.
Displays its own status, including clock, memory, and battery level.
Lets you change the batteries in the field without resetting the clock.
Allows you to test individual smart sensors.
Requirements
- USB cable (provided); compatible logger with appropriate cable and/or base station
- U-DT-2: HOBOware 2.6 or greater
Compatibility
- HOBO U30 series systems, HOBO Weather Stations and Micro
Stations (H21), and HOBO Energy Logger Pro (H22)
Firmware upgrades
Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature 0 to 50C (32 to 122F)
Storage temperature -10 to 50C (14 to 122F)
Time accuracy 1 minute per month at 25C (77F); see Plot A
Logger-to-shuttle transfer speed
- USB 64K in approximately 30 seconds
- Serial: 512K in approximately 60 seconds
Shuttle-to-host transfer speed
- Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers)
4 MB (minus 64 KB for shuttle information): enough for readouts of 512K loggers
Idle timeout Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware (see HOBOware Users Guide for details) or changing logger batteries (10 minutes)
Ports
RJ-12 jack for communicating with smart sensors; mini-B full speed USB port for communicating with host
computer; full speed USB port for communicating with U-Series loggers and base stations; high speed serial port
for communicating with serial loggers. Shuttle communicates with only one device at a time.
Batteries
Main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)
Battery life
Main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)
Weight 153 g (5.4 oz)
Dimensions 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials ABS case with urethane rubber grips, polycarbonate label
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au