Data Loggers
Monnit - ALTA - AA - Wireless Temperature Sensor with 50' Probe
Product code: MNS2-4-W2-TS-ST-L50
The MNS2-4-W2-TS-ST-L003 is wireless temperature sensor that uses NTC thermistor for measuring ambient temperature with 50' probe. Measurement range of -40 to +125 C with an accuracy of +/- 1%. Wireless transmission rate of 1,200+ feet through walls (12-14 walls typical). Automated data logging when connected to the Monnit gateway (required, sold separately); can record 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle).
$425.00
AUD + GST
$467.50
AUD Inc. GST
Monnit - ALTA - AA - Wireless Temperature Sensor with 10' Probe
Product code: MNS2-4-W2-TS-ST-L10
The MNS2-4-W2-TS-ST-L003 is wireless temperature sensor that uses NTC thermistor for measuring ambient temperature with 10' probe. -Measurement range of -40 to +125 C with an accuracy of +/- 1%. -Wireless transmission rate of 1,200+ feet through walls (12-14 walls typical). -Automated data logging when connected to the Monnit gateway (required, sold separately); can record 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle).
$353.00
AUD + GST
$388.30
AUD Inc. GST
Monnit - ALTA - AA - Wireless Temperature Sensor with 3' Probe
Product code: MNS2-4-W2-TS-ST-L003
The MNS2-4-W2-TS-ST-L003 is wireless temperature sensor that uses NTC thermistor for measuring ambient temperature with 3' probe. -Measurement range of -40 to +125 C with an accuracy of +/- 1%. -Wireless transmission rate of 1,200+ feet through walls (12-14 walls typical). -Automated data logging when connected to the Monnit gateway (required, sold separately); can record 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle).
$310.00
AUD + GST
$341.00
AUD Inc. GST
Monnit - ALTA - AA - Wireless Temperature Sensor
Product code: MNS2-4-W2-TS-ST
The MNS2-4-W2-TS-ST is wireless temperature sensor that uses NTC thermistor for measuring ambient temperature. -Measurement range of -40 to +125 C with an accuracy of +/- 1%. -Wireless transmission rate of 1,200+ feet through walls (12-14 walls typical). -Automated data logging when connected to the Monnit gateway (required, sold separately); can record 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle).
$285.00
AUD + GST
$313.50
AUD Inc. GST
Lowell TCM-5 Very Deep Water Tilt Current Meter
Product code: TCM-5
The TCM-5 is a current meter with data logger that is designed to operate in the Abyssopelagic and Hadalpelagic Zones to a maximum depth of 10,000 meters. -Measures current using the drag-tilt principle. -The built-in data logger is designed for NOAA with USB, microSD card slot and long-life lithium battery (continuous sampling for 1 year). -Made with a titanium housing.
$10,805.00
AUD + GST
$11,885.50
AUD Inc. GST
Lowell TCM-4 Shallow Water Tilt Current Meter
Product code: TCM-4
The TCM-4 is a current meter with data logger that is designed to operate off shallow water such as coastal ponds, bays, rivers and tidal flats. -Measures current using the drag-tilt principle. -Only 10 inches (25 cm) long and is able to operate in less than one foot of water. -Contains a 3-axis accelerometer and 3-axis magnetometer for measuring tilt and bearing.
$2,752.00
AUD + GST
$3,027.20
AUD Inc. GST
Lowell TCM-3 Deep Water Tilt Current Meter
Product code: TCM-3
The TCM-3 is a current meter with data logger that is designed to operate off the continental shelf in water up to 4500m depth. -Measures current using the drag-tilt principle. -The built-in data logger is designed for NOAA with USB, microSD card slot and long-life lithium battery (continuous sampling for 1 year). -Made with a titanium housing.
$7,718.00
AUD + GST
$8,489.80
AUD Inc. GST
GL980 Data Logger
Product code: GL980
High speed general purpose data logger with 7" colour display with eight analogue channels.
$4,850.00
AUD + GST
$5,335.00
AUD Inc. GST
Feed-Thru Modular Plug Crimp
Product code: IC-30-495
The FT-45 is a simple, compact and highly effective modular plug crimp tool for installers and techs that terminate RJ-45 connectors regularly. Instead of another traditional oversized, heavy, crimp tool style loaded with features that are rarely used or that just don‘t work well, we took this tool in a new direction. It‘s built for today and tomorrow, not the past. This tool was designed to work seamlessly with the IDEAL Feed-Thru Modular plugs, and is compatible with other feed-thru style connectors.
$139.90
AUD + GST
$153.89
AUD Inc. GST
2 in stock
DB9 Mini Gender Changers (Female + Male, CAN Bus)
Product code: Gender-Changers
Convert a DB9 female port to a male port and vice versa. Allows you to connect your CANedge/CLX000 CAN logger to another male DB9 connector. In this case you'd need a DB9 F/F gender changer.
$89.80
AUD + GST
$98.78
AUD Inc. GST
DB9-DB9/DB9 - Y-Splitter (1x Male & 2x Female)
Product code: DB9-DB9-DB9
This low cost DB9 (D-sub 9) Y-splitter cable lets you easily split a single CAN bus DB9 connector into two connectors. This is achieved via the quality over molded male-to-female/female DB9 connectors. The DB9-DB9/DB9 adapter is ideal for connecting multiple CAN devices to a single port - or e.g. daisy chaining CAN modules.
$89.80
AUD + GST
$98.78
AUD Inc. GST
1 in stock
DB9-DB9 Extension Cable (3M, CAN Bus)
Product code: DB9-DB9-3M
With this 3 meter low cost DB9 female to DB9 male connector cable, you'll be able to easily extend your CAN bus system or connect your CAN logger to a difficult-to-reach location. The cables are non-terminated, letting you combine multiple together.
$89.60
AUD + GST
$98.56
AUD Inc. GST
DC to Cigarette Outlet Adapter
Product code: Cigarette-DC
With this DC male connector and our DB9-to-DB9/DC adaptor, you can easily power e.g. your CANedge/CLX000 CAN logger via your car's cigarette lighter (in case your CAN bus does not provide a direct power supply). It can also be used if you want to log data via a CANCrocodile, powering your installation via your cigarette outlet.
$51.00
AUD + GST
$56.10
AUD Inc. GST
DB9 to DB9/DC Power Splitter
Product code: DB9-DB9-DC
With the DB9-to-DB9/DC power splitter, you'll be able to power e.g. your CAN logger via a power outlet, battery or e.g. cigarette receptacle. The DC female connector is a standard 5.5 mm (ID, inner diameter) x 2.1 mm (CPD, center pin diameter). The adaptor is great for test setups, machine logging or vehicles where no power is provided by the DB9 connector (or you prefer not to use the CAN bus power supply).
$89.60
AUD + GST
$98.56
AUD Inc. GST
CANEDGE Accessory - WiFi Rooftop Antenna (SMA, 3M Cable)
Product code: CSS-WiFI
WiFi Rooftop Antenna extends the range of your CANEdge data logger. The WiFi SMA antenna of the CANedge2 can be easily disconnected - letting you e.g. add this rooftop SMA antenna.
$51.00
AUD + GST
$56.10
AUD Inc. GST
CAT-to-DB9 Adapter Cable (Deutsch 9-Pin, Caterpillar)
Product code: DB9-CAT
This 1.5 meter CAT-to-DB9 deutsch 9-pin adapter fits most Caterpillar heavy duty vehicles and lets you easily connect your CANedge/CLX000 CAN logger to start recording J1939 data.
$89.10
AUD + GST
$98.01
AUD Inc. GST
3 in stock
CANmod.input: 8 x Analog/Digital/Pulse to CAN Bus Converter
Product code: CANmod.input
This sensor-to-CAN module produces analog, digital & pulse measurements from 8 input channels - and outputs the data via CAN bus. The module is 100% standalone, no PC required.
$539.60
AUD + GST
$593.56
AUD Inc. GST
![CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]](/media/cache/attachment/filter/product_large/ca048c1dad6aff04975c90c926869a37/127622/61ee13ef7cbe9625321350.png.webp)
CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]
Product code: CANmod.temp
This thermocouple-to-CAN module produces temperature data from 4 thermocouple sensors and outputs it via CAN bus. The module is 100% standalone - no PC required. -The module supports all thermocouple types (B, E, J, K, N, R, S, T) and can be daisy-chained for 8, 12, 16, ... channels.
$469.80
AUD + GST
$516.78
AUD Inc. GST
CANmod.gps: GPS-to-CAN with 3D Inertial Sensor and UDR
Product code: CANmod.gps
This standalone GPS-to-CAN module produces GNSS position and 3D inertial data (via a gyroscope & accelerometer) and outputs it via configurable CAN bus frames.
$369.80
AUD + GST
$406.78
AUD Inc. GST
Wall bracket for data loggers - Wall holder for testo 184
Product code: 0554-1841
Using the wall bracket, you can securely attach appropriate data loggers to goods during transport. This enables optimum monitoring of transport conditions. The wall bracket can easily be fixed using adhesive strips.
$31.00
AUD + GST
$34.10
AUD Inc. GST
ComSoft 21 CFR Part 11 Software
Product code: 0554-1705
The ComSoft 21 CFR Part 11 software means you get validatable software for programming and readout of Testo data loggers and for archiving data. It fulfils all the FDA's 21 CFR Part 11 requirements. -Intuitive and validatable software for the pharmaceutical industry. -Graphic and tabular display of all measurement parameters. -Effortless creation and management of reports. -Digital signature and audit trail for maximum security and safety.
$2,819.90
AUD + GST
$3,101.89
AUD Inc. GST
ComSoft Professional Software
Product code: 0554-1704
The ComSoft Professional software means you get software for programming and readout of Testo data loggers and for archiving data. It offers analysis and display possibilities over and above the basic functions. -Professional software for programming and readout of Testo data loggers and for archiving data. -Graphic and tabular display of all measurement parameters. -Effortless creation and management of reports. -Intuitive user interface for efficient work.
$639.00
AUD + GST
$702.90
AUD Inc. GST
Wall Bracket for Testo Data Loggers - 0554-1702
Product code: 0554-1702
Use the wall bracket to fix your data logger securely and firmly to walls. Made from ABS plastic; particularly secure thanks to the lock included in delivery.
$45.00
AUD + GST
$49.50
AUD Inc. GST
iMonnit Notification Credits 100 Pack
Product code: MNW-NC-100
iMonnit Notification Credits 100 Pack.
$32.00
AUD + GST
$35.20
AUD Inc. GST
Clever Logger Temperature Logger with External Probe
Product code: CLX-01-50
Bluetooth temperature logger with probe to measure temperature using the Clever Logger Gateway. With 5m cable.
$153.636
AUD + GST
$169.00
AUD Inc. GST
Deco-cover
Product code: IC-0554-2009
With the deco-cover for testo 160 THL, your exhibits are always the focus. Thanks to the customisable housing cover, you can integrate the WiFi data logger perfectly and discreetly into any exhibition.
$22.00
AUD + GST
$24.20
AUD Inc. GST
AC Power Adapter for the RX3000 & U30
Product code: AC-U30-EU
AC Power adaptor for HOBO RX3000 and U30 Data loggers.
$126.00
AUD + GST
$138.60
AUD Inc. GST
MX2500 Electrode Storage Cap
Product code: MX2500-STORE-CAP
The electrode storage cap is used to protect the pH electrode in the HOBO MX pH Logger, as well as to properly store the electrode in proper pH storage solution (MX2500-STORE-SOLN). The storage cap has the added benefit of being able to be used for field calibrations.
$47.00
AUD + GST
$51.70
AUD Inc. GST
MX2500 Anti-Biofouling Copper Guard
Product code: MX2500-GUARD
The Anti-Biofouling Copper Guard can be used in addition to the standard electrode guard for protection against biofouling during deployment. The anti-biofouling guard uses copper to reduce biofouling, while still allowing proper water flow to the sensor.
$79.10
AUD + GST
$87.01
AUD Inc. GST
MX2500 End Cap
Product code: MX2500-END-CAP
The replacement sensor end cap replaces the original sensor end cap that ships with the HOBO MX pH Logger.
$379.40
AUD + GST
$417.34
AUD Inc. GST