Portable Air Quality Meters
BLOCK CO2 Data/Alarm System - IC-BLOCKCO2
Product code: BLOCK-CO2
The Block CO2 is a WiFi monitoring and alarm system that gives you an overview of CO2 and temperature within indoor spaces. A good place to use bun green is places where you need an overview of the indoor climate, such as the classroom or the office. Has an internal sensor to measure carbon dioxide, humidity and temperature. Sends email and text alerts when measured reading exceed set limits. Easily get access to charts, graphs and historical records.
$289.00
AUD + GST
$317.90
AUD Inc. GST
8 in stock
Kimo CO2 & Temperature Meter - AQ110S
Product code: AQ110S
Kimo CO2 and Temperature Meter (Calibration not included)
$709.20
AUD + GST
$780.12
AUD Inc. GST
Datalogging Indoor Handheld Air Quality Meter - IC-800050
Product code: IC-800050
Portable measurement and datalogging of Indoor Air Quality (IAQ) parameters: Air Temperature, RH, CO2, Dew Point and Wet Bulb. This meter is normally priced at $499+GST!
$439.50
AUD + GST
$483.45
AUD Inc. GST
8 in stock
Data Logging Particulate Monitor sensor with the Series 500 Handheld
Product code: IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual's portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 500 will allow you to view these results in real time, data log and if desired purchase additional sensor heads to monitor other gases. This kit is normally $3129.10+GST!
$2,799.00
AUD + GST
$3,078.90
AUD Inc. GST
1 in stock
Indoor Handheld Air Quality Meter - IC-800046
Product code: IC-800046
Monitor Indoor Air Quality (IAQ) in public spaces with potentially high levels of CO2 (carbon dioxide)
$949.60
AUD + GST
$1,044.56
AUD Inc. GST
Davis AirLink Air Quality Sensor - IC-7210
Product code: IC-7210
Professional air quality sensor for indoor & outdoor use. It uploads indoor or outdoor air quality data directly to the WeatherLink Cloud via Wi‐Fi. It can be mounted indoors on a flat surface such as a counter or table top, or on a wall using the included mounting bracket.
$310.00
AUD + GST
$341.00
AUD Inc. GST
2 in stock
Oxygen Pen - 800047
Product code: 800047
Reads oxygen in air for environmental studies, IAQ, bio-technology (for oxygen incubators and anaerobic cultivators), food storage and refrigeration, and testing fire alarm and fuel cell systems.
$729.30
AUD + GST
$802.23
AUD Inc. GST
Series 500 Lithium Portable Air Quality Monitor - IC-HH S500L
Product code: IC-HH-S500L
Aeroqual portable air quality monitors are a cost-effective solution to accurately measure multiple target gases at different concentrations in indoor and outdoor applications. The Series 500 Lithium includes a monitor base with lithium battery , power pack, alarms, datalogging and PC software. Requires a gas sensor attachment.
$2,099.50
AUD + GST
$2,309.45
AUD Inc. GST
UT337A Carbon Monoxide CO Meter - UT337A
Product code: UT337A
The UT337A is a portable meter for detecting carbon monoxide gas. It can measure a wide range of CO concentrations with a short response time. Users can set up both audio and visual alarms.
$179.80
AUD + GST
$197.78
AUD Inc. GST
SD800: CO2, Humidity and Temperature Datalogger
Product code: SD800
SD800 monitors air quality in schools, office buildings, greenhouses, hospitals and anywhere that high levels of carbon dioxide are generated. -Selectable data sampling rate of 5, 10, 30, 60, 120, 300, 600 seconds or automatic. -Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor. -Triple LCD simultaneously displays CO2, Temperature and Relative Humidity.
$889.10
AUD + GST
$978.01
AUD Inc. GST
Extech CO240: Indoor Air Quality, Carbon Dioxide (CO2)
Product code: IC-CO240
The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a greenhouse or nursery, to insure optimal plant grown. Complete with six AAA batteries, USB cable, PC software and soft case.
$659.10
AUD + GST
$725.01
AUD Inc. GST
testo 535 - Digital CO2 measuring instrument with App connection
Product code: IC-0563-0535
The compact CO 2 measuring instrument testo 535 is ideally suited for simple, fast and precise determination of carbon dioxide content to ensure indoor air quality and thus health and performance. The connection to the testo Smart App enables configuration, display (also as second screen) and storage as well as documentation of the measured values directly in the App. - Simple, fast and precise measurement of CO₂ concentration. - Audible alarm sounds if a limit value is exceeded. - Fast in-app configuration, graph history, second screen and measurement data memory in the testo Smart App. - High reproducibility of measurement results due to long-term stable infrared sensor technology.
$949.80
AUD + GST
$1,044.78
AUD Inc. GST
LoggerFlex BLOCK ESSENTIAL - IC-BLES00
Product code: IC-BLES00
The LoggerFlex Essential is from the Wifi Block series that measures ambient temperature and ambient relative humidity. Also functions as a flood detector and dry contact (Digital Input) using external outputs. Can measure and log measured parameters as long it has a WiFi connection. View measured data in your smart device. Has an a silicon protective cover with IP31 protection. Uses a USB-C connector so it can easily be powered using your desktop, laptop or other similar external power source.
$369.30
AUD + GST
$406.23
AUD Inc. GST
4 in stock
Testo 400 air flow kit with with 16mm vane probe
Product code: IC-0563-0400-72
This kit features the the testo 400 universal IAQ instrument with one with 16mm vane probe (including temperature and humidity sensor), one vane probe head and one high-precision humidity/temperature probe head - all three can be attached to the Bluetooth handle supplied. For measurements at ceiling outlets, simply combine the 100 mm vane probe with the telescope (can be extended up to 1.0 m) and the 90 degrees angle.
$6,109.80
AUD + GST
$6,720.78
AUD Inc. GST
HFX205-100 Formaldehyde Meter
Product code: HFX205-100
The HFX205-100 is a professional meter designed to measure formaldehyde in air evaporating off from wooden material, flooring, furniture, textiles, etc. -Has an alarm function whenever the detected formaldehyde level exceeds limits. -Get results in less than 30 seconds. -Includes software for online data transfer via USB.
$2,329.30
AUD + GST
$2,562.23
AUD Inc. GST
TSI 7545 IAQ-Calc Indoor Air Quality, Temperature and Humidity Meter with Data Logger
Product code: IC-7545
The TSI 7545 IAQ-Calc is an Indoor Air Auality (IAQ) meter and data logger for measuring carbon monoxide and carbon dioxide levels. Also measures indoor temperature and temperature. Includes meter, batteries, carrying case, service and operating manual and NIST calibration certificate.
$4,638.90
AUD + GST
$5,102.79
AUD Inc. GST
TSI 7515 IAQ-Calc Indoor Air Quality Meter
Product code: IC-7515
The TSI 7515 IAQ-Calc is an Indoor Air Auality (IAQ) meter for measuring carbon dioxide levels. Includes meter, batteries, carrying case, service and operating manual and NIST calibration certificate.
$1,293.68
AUD + GST
$1,423.05
AUD Inc. GST
Testo 400 air flow kit with hot wire probe
Product code: IC-0563-0400-71
This kit features the the testo 400 universal IAQ instrument with one hot wire probe head (including temperature and humidity sensor), one vane probe head (100 mm) and one high-precision humidity/temperature probe head - all three can be attached to the Bluetooth handle supplied. For measurements at ceiling outlets, simply combine the 100 mm vane probe with the telescope (can be extended up to 1.0 m) at a 90 degrees angle.
$5,979.00
AUD + GST
$6,576.90
AUD Inc. GST
Testo 400 - Universal IAQ instrument. With transport case.
Product code: IC-0560-0400
The testo 400 is the universal measuring instrument for all IAQ professionals. Measure, analyze and document all IAQ and comfort level parameters using just one instrument - simply, conveniently and in compliance with the standards.
$2,649.50
AUD + GST
$2,914.45
AUD Inc. GST
Series 930 Fixed Air Quality Monitor - IC-FM S930
Product code: IC-FM-S930
The Series 930 Fixed Indoor Air Quality Monitor is a flexible monitor compatible with a range of gas sensors. The sensor is housed in a robust IP65/NEMA 4 rated water resistant enclosure protecting it from water damage.
$1,359.20
AUD + GST
$1,495.12
AUD Inc. GST
Amprobe CO2-100 Handheld Carbon Dioxide Meter
Product code: IC-CO2-100
Instant feedback with CO2 levels, with additional temperature and humidity measurement. Built in alarm warns against dangerous CO2 levels. The portable CO2-100 Air Quality meter is designed to measure air quality compliance in occupied spaces such as offices, production floors, schools or hospitals.
$2,000.00
AUD + GST
$2,200.00
AUD Inc. GST
Series 900 Fixed Air Quality Monitor - IC-FM S900
Product code: IC-FM-S900
The Series 900 Fixed Indoor Air Quality Monitor is a flexible monitor compatible with a wide range of gas sensors suited for indoor applications. The monitor can also be configured with a temperature and humidity sensor.
$479.40
AUD + GST
$527.34
AUD Inc. GST
Series 300 Lithium Portable Air Quality Monitor - IC-HH S300L
Product code: IC-HH-S300L
Aeroqual portable air quality monitors are a cost-effective solution to accurately measure multiple target gases at different concentrations in indoor and outdoor applications. The Series 300 Lithium includes a monitor base with lithium battery , power pack, alarms and 0-5V output. Requires a gas sensor attachment.
$1,199.10
AUD + GST
$1,319.01
AUD Inc. GST
Indoor Air Quality Test Kit for WELL
Product code: IC-HH-IAQKWELL_ANZ
Complete air quality monitoring kit for checking compliance to the WELL Building Standard for Air. Includes: Series 500 Monitor base including: LCD digital display, Lithium battery and charger, built-in datalogger, monitor to USB cable, PC software. Particulate Matter Sensor PM10 / PM2.5 Carbon Monoxide Sensor, 0-100 ppm Ozone Sensor, 0-0.5ppm Temperature & Humidity Sensor, and small carry case
$4,889.30
AUD + GST
$5,378.23
AUD Inc. GST
testo 440 - Air velocity and IAQ measuring instrument
Product code: IC-0560-4401
Precise, reliable measurement of all air velocity and IAQ parameters with just one measuring instrument: the multifunction measuring instrument features intuitive operation with clearly structured measurement menus.
$759.80
AUD + GST
$835.78
AUD Inc. GST
Testo 400 IAQ and comfort kit with tripod
Product code: IC-0563-0401
Ideal kit for IAQ professionals, with a focus on indoor air quality and comfort level. You will receive the testo 400 universal IAQ measuring instrument with intuitive measurement menus, one carbon dioxide probe (with Bluetooth handle), one turbulence probe and one globe thermometer (150 mm), both with fixed cable).
$7,969.70
AUD + GST
$8,766.67
AUD Inc. GST
TSI 7575 Q-Trak Multi-Function Indoor Air Quality Monitor. Includes TSI 982 CO2, CO, Temperature and Humidity Probe.
Product code: IC-7575-NB
The TSI 7575 Q-Trak Multi-Function Indoor Air Quality Monitor provides quick, accurate information to assess key indoor air quality (IAQ) parameters.
$6,575.79
AUD + GST
$7,233.37
AUD Inc. GST
TSI 7575 Q-Trak Multi-Function Indoor Air Quality Monitor (No probe)
Product code: IC-7575-X-NB
The TSI 7575 Q-Trak Multi-Function Indoor Air Quality Monitor provides quick, accurate information to assess key indoor air quality (IAQ) parameters. Requires IAQ probe, sold separately.
$2,485.26
AUD + GST
$2,733.79
AUD Inc. GST