Modbus TCP Weather Station Gateway - ICKTA-282
Backorder Now, once ordered your item will dispatch before the 21st of June 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
$302.39 AUD Inc. GST



The ICKTA-282 Modbus TCP Weather Station Gateway is a major upgrade to the ICGWY-141 serial modbus gateway, adding Modbus TCP/IP support.
The gateway allows you to easily connect your PLC (Programmable Logic Controller), RTU (Remote Telemetry Unit) or SCADA (Supervisory Control And
Data Aquisition) System to one of the following Davis weather stations:
IC6152 Cabled Vantage Pro 2
IC6162 Cabled Vantage Pro 2 Plus
IC6152 Wireless Vantage Pro 2
IC6162 Wireless Vantage Pro 2 Plus
IC6153 Wireless Vantage Pro 2 Fan Aspirated
IC6163 Wireless Vantage Pro 2 Plus Fan Aspirated
IC6316 Wireless Weather Envoy (with Wireless ISS, ISS Plus, ISS Solar Fan Aspirated or ISS Plus Solar Fan Aspirated)
IC6250 Vantage Vue
The gateway plugs into the weather station's console using the Davis WeatherLink cable (Weather Link for Vantage Pro Serial) and appears on the Modbus network as a Modbus TCP/IP or RTU slave. This allows your programmable controller to monitor and carry out actions based on wind speed, wind direction, temperature, etc.
Features:
- New! Two Open Collector outputs for alarms or control
- Connects to a Modbus TCP/IP network via Ethernet. Can be polled by up to three Modbus masters simultaneously
- Provides a webpage whereby TCP/IP settings can be easily configured. Also shows current settings, weather data, and communications statuses
- Also supports Modbus RTU over RS-485.
- Supports the new LOOP 2 command. This provides an additional 16 packets of previously unavailable weather data.
- Can directly write the internal memory of the weather station, allowing configuration values to be changed (commonly latitude, longitude, elevation,
timezone, etc)
- Allows interrogation over HTTP to return any Modbus register values in XML format. Make your own custom application using the weather data
- The unit can be screwed to a panel, or mounted to DIN rail.
- Dimensions: 115 x 90 x 40 mm
Specifications
- Power Supply: 8 to 28V DC
- Power Consumption: 100mW
- Operating Temperature: 0 to 70 C
- 2 x Open Collector Outputs: for alarms or control
- Protocol: Modbus TCP/IP network via Ethernet. Can be polled by up to three Modbus masters simultaneously. Also supports Modbus RTU over RS-485.
- Provides a webpage whereby TCP/IP settings can be easily configured. Also shows current settings, weather data, and communications statuses
- Supports the new LOOP 2 command. This provides an additional 16 packets of previously unavailable weather data.
- Can directly write the internal memory of the weather station, allowing configuration values to be changed (commonly latitude, longitude, elevation,
timezone, etc)
- Allows interrogation over HTTP to return any Modbus register values in XML format. Make your own custom application using the weather data
- Can be screwed to a panel, or mounted to DIN rail.
- Dimensions: 115L x 90W x 40H (mm)
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au