Note: Gateway required to operate this sensor
ALTA wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required. The wireless accelerometer - tilt sensor activates at a set time interval (defined by user) and converts accelerometer measurements to pitch and roll (0 to 180 -> -180 to 0 degrees). The data is displayed in degrees with 0.1 degree of resolution.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can't be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit's standard wireless sensors. Monnit's AA sensors have a battery life that typically lasts 10+ years.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Features:
- Measures Pitch and Roll
- Measuring Range 0 to 180 > -180 to -0
- Includes Wireless Sensor, AA battery (typical battery life is up to 10 years) and mounting hardware.
Specifications
- Sensitivity: 4096 count/g
- Sensitivity Range: +/- 2.0 g
- Measurement Accuracy: +/- 2.5 %
- Minimum G Force to Turn On/Wake Up: 0.050 g - 0.100 g
- Fastest Update Interval/Heart Rate in Any Configuration: 1 Minute Sampling Rate: 500 Samples/Sec.
- Current Consumption: 0.7 uA (sleep mode)/2mA (radio idle/off mode)/2mA (measurement mode)/25mA (radio RX mode)/35mA (radio TX mode)
- Bandwidth for Data Measurement: 800 Hz
- Resolution: 0.1 degrees
- Measuring Range: 0 to 180 > -180 to -0 (Rotating in positive direction)