4-Channel Data Logger With Thermocouple External Sensor Input
Backorder Now, once ordered your item will dispatch before the 23rd of May 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
$1,006.50 AUD Inc. GST
The testo 176 T4 temperature data logger can tell you at a glance if the temperature of the room or facility is within the prescribed thresholds. It can measure the temperature at up to four different sites simultaneously and has a super size memory that can save up to 2?000?000 readings. This gives you the freedom to read out the logger data at longer intervals, even when measuring cycles are shorter.
You will need at least one temperature sensor to use your logger. There is a wide selection of thermocouple sensors ranging from type K, T or J sensors to air, surface or probe sensors available.
Technical features
The logger's display provides you with a wide range of valuable information including current measurement values, threshold values, points where these thresholds have been exceeded, min/max values as well as the remaining battery power. And because all these values can be read off directly from the display, there is no need for you to boot up your PC. In addition to this nice little detail, the logger also has a super size memory and an exceptionally long battery life of up to 8 years. This gives you the freedom to read out the logger data at longer intervals, even when measuring cycles are shorter.
The testo 176 T4 data logger is IP 65 protected and can therefore also be used in dusty and dirty work environments. The standard AA batteries can be replaced by the user.
Possible areas of application
- - Checking the temperature in ultra-low temperature freezers or under cryo conditions
- - Measuring and logging flow and return temperatures at underfloor heating distributors in order to check that they are working properly
- - Checking process temperatures
- - Checking flow and return temperatures of heating systems
Programming and analyzing your data logger
Choose one of three software versions to program or read out your logger or to analyse the measuring data you have obtained on your PC:
- - Software ComSoft Basic - available for free downloading - allows you to program your logger and analyse the data quickly and easily
- - Software ComSoft Professional - optional - provides you with additional possibilities and a more detailed analysis of the temperature values
- - Software ComSoft CFR 21 Part 11 - optional - ideal for the special demands of the pharmaceutical sector in compliance with 21 CFR Part 11
You will need a USB cable (not included) to program your data logger. The data can be transferred to your PC either via USB cable or SD card. Both are available as accessories which can be ordered together with your testo 176 T4.
testo 176 T4 temperature data logger with external sensor ports (TC type T, K and J), wall mount, lock, battery, calibration protocol
Specifications
| General technical data | |
|---|---|
|
Protection class |
|
|
Channels |
|
|
Battery type |
|
|
Battery life |
|
|
Memory |
|
|
Storage temperature |
|
|
Dimensions |
|
|
Operating temperature |
|
| Temperature - TC Type K (NiCr-Ni) | |
|---|---|
|
Measuring range |
|
|
Accuracy |
|
|
Resolution |
|
| Temperature - TC Type T (Cu-CuNi) | |
|---|---|
|
Measuring range |
|
|
Accuracy |
|
|
Resolution |
|
| Temperature - TC Type J (Fe-CuNi) | |
|---|---|
|
Measuring range |
|
|
Accuracy |
|
|
Resolution |
|
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au