Digital Glass Body Foodcare pH Electrode for Dairy Products - IC-FC2100
Backorder Now, once ordered your item will dispatch before the 01st of June 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
The FC2100 is made for dairy samples such as milk, yogurt, cheese. It has a digital glass body, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. Also features a built-in microchip that stores sensor type, serial number, and calibration information. It also features an open junction design with viscolene gel electrolyte, a sensing bulb made of low temperature glass, and a conical tip shape.
Regular price
$442.47 AUD
+ GST
$486.72 AUD Inc. GST
$486.72 AUD Inc. GST
Features:
- Built-In Microchip: The built-in microchip stores sensor type, serial number and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge once the electrode is plugged in. The ability to transfer information allows
for hot swapping of probes without having to recalibrate. All pH measurements are performed within the electrode and transferred digitally to the meter.
This overcomes any noise issues associated with the traditional high impedance analog measuring system. Electrical noise can be generated from a built
in temperature sensor and while working in a humid environment.
- Conical Glass Tip: The conical shaped tip design allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in food
products including meat, cheese, yogurt, and milk. The glass tip uses a special LT (low temperature) glass formulation with a lower resistance of approximately
50 mega ohms compared to GP (general purpose) glass with a resistance of about 100 megaohms. This is beneficial since many food products are stored
at low temperatures. As the temperature of the glass decreases in the sample, the resistance of the LT glass will approach that of GP glass. If using
GP glass, the resistance would increase above the optimum range, resulting in increased impedance and ultimately affecting the measurement.
- Open Reference Junction: Suspended solids and proteins found in food products will clog a conventional ceramic reference junction. This clogging will
impede the measurement circuit between the indicating glass electrode and the internal reference resulting in slower response time, erratic readings
and frequent electrode replacement. The open junction design consists of a solid gel (viscolene) interface between the sample and internal Ag/AgCl
reference. This interface not only prevents silver from entering the sample, but also makes it impermeable to clogging, resulting in a fast response
and stable readings.
- Glass Electrode Body: The glass electrode body is suitable for a wide range of applications due to its chemical resistance. The glass electrode is compatible
with many non-aqueous solvents and other aggressive chemicals. Glass is also resistant to many forms of radiation, such as ultraviolet radiation.
Specifications
- Measurement Range: pH: 0 to 12
- Reference Cell Type: Double, Ag/AgCl
- Junction Type/Flow Rate: Open
- Type of Electrolyte: Viscolene
- Body Material: glass
- Tip / Shape: Conic (12 x 12 mm)
- Matching Pin: No
- Max. Pressure: 0.1 bar
- Temperature Operating Range: 0 to 60 C (32 to 140 F)
- Body Length/Overall Length: 120 mm/163.5 mm
- Temperature Sensor: yes
- Cable: Coaxial; 1 m (3.3 inches)
- Connector Type: 3.5 mm connector
- Amplifier: no
- Recommended Use: Application specific purpose, dairy
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au