Digital PEI Body pH Electrode for Field Applications - IC-HI12300
Backorder Now, once ordered your item will dispatch before the 01st of June 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
The HI12300 was designed for field and industrial applications. It has a chemical resistance and virtually unbreakable PEI (polyetherimide) body, double junction, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes.
Regular price
$246.96 AUD
+ GST
$271.66 AUD Inc. GST
$271.66 AUD Inc. GST
The HI12300 is a plastic body, double junction, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital
electrodes.
The HI12300 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single
ceramic junction and the spherical pH sensing portion is made with general purpose glass. The electrode has a rugged PEI (polyetherimide) body
that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications.
Features:
- Built-In Microchip: The built-in microchip stores sensor type, serial number and calibration information including date, time, offset, slope, probe
condition and buffers used. This information is automatically retrieved by Edge once the electrode is plugged in. The ability to transfer information
allows for hot swapping of probes without having to recalibrate. ??All pH measurements are performed within the electrode and transferred digitally
to the meter. This overcomes any noise issues associated with the traditional high impedance analog measuring system. Electrical noise can be generated
from a built in temperature sensor and while working in a humid environment.
- Spherical Glass Tip: The spherical shaped tip design allows for a wide area of contact with the sample. This permits a faster electrode response
with a higher degree of stability. The tip uses a glass formulation that has a resistance of approximately 100 megaohms. This means that measuring
conditions are optimal around ambient temperatures. Use of high or low temperature glass around ambient temperatures would not be optimal due to
a long response time or a shortened lifespan of the electrode.
- Double Junction Reference: A double junction electrode has an internal compartment surrounding the reference wire. Silver ions are present in the
electrolyte of the internal compartment, which houses the Ag/AgCl reference wire; the electrolyte outside this compartment is silver free. The
double junction design means that virtually no silver from the electrode enters the sample. This design allows measurement in applications where
silver ions in the sample are undesirable or silver precipitates on the junction are likely to form.
- PEI Electrode Body: The PEI (polyetherimide) electrode body is suitable for a wide range of applications and excels in field measurements due to
its durability. The shielding around the spherical glass tip minimizes breakage due to accidental bumping or dropping of the electrode. The PEI
plastic is a high quality plastic that is chemically resistant to many harsh chemicals.
- Built-In Temperature Sensor: HI12300 features a built-in thermistor temperature sensor that is in the tip of the indicating pH electrode. A thermistor
temperature sensor provides for a high accuracy temperature reading and should be as close as possible to the indicating pH electrode in order
to compensate for the effect that temperature has on the membrane potential. By having an accurate reading it is possible to provide an accurate
temperature compensated reading.
Specifications
- Measurement Range: pH: 0 to 13
- Reference Cell Type: double
- Junction Type/Flow Rate: ceramic, single / 15-20 ?L/h
- Type of Electrolyte: gel
- Body Material: PEI
- Tip / Shape: spheric (dia: 7.5 mm)
- Matching Pin: no
- Max. Pressure: 2 bar
- Temperature Operating Range: -5 to 70 C (23 to 158 F)
- Body Length/Overall Length: 120 mm / 163.5 mm
- Temperature Sensor: yes
- Outer Diameter: 12 mm
- Cable: 1 m (3.3')
- Connector Type: 3.5 mm connector
- Amplifier: no
- Recommended Use: field applications
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au