Replaceable sensor
Auto Stable or Auto Hold measurement
Automatic temperature compensation
Auto buffer recognition
Auto power off (30 mins)
2x CR2032 Li battery: 400 hours life
Packed in handy carrying case
Supplied with required calibration solutions
Material: ABS, Epoxy
Display: Custom monochrome LCD
Operating conditions: 5 to 40 C; 85% humidity
Warranty: 2 years on meter; 6 months on sensor
MODEL |
pH 33 |
|---|---|
Measurement principle |
Glass electrode method |
Minimum
|
0.1mL or more *1 |
pH range |
0 to 14pH |
Resolution
|
0.01pH |
Calibration |
Up to five-point, USA: 1.68, 4.01, 7.00, 10.01 & 12.46
|
Accuracy *2 |
+- 0.01pH |
Temperature Display |
0 to 50 C |
Display |
Custom (monochrome) digital LCD with back-light |
Operating
|
5 to 40 C, 85% or less in relative humidity (no condensation) |
Power |
CR2032 batteries (x2) |
Battery life |
Approx. 400 hours in continuous use |
Outer dimensions
|
164 mm ? 29mm ? 20mm (excluding projections)?/ Approx. 50 g (meter only, without batteries) |
Main functions |
Temperature compensations, waterproof *3, auto stable/auto hold, automatic power OFF |
*1 0.05 mL or more if the sampling sheet B (sold separately) is used.
*2 The closeness of agreement between measured value and actual value of the pH 4.01 standard solution after two point calibration using
pH 4.01 and pH 7.00 standard solutions. The temperature during the calibration and measurement is the same. Two point calibration is started
from pH 7.00. The error of standard solutions and rounding error (?1 digit) are not included.
*3 IP67: no failure when immersed in water at a depth of 1 meter for 30 minutes
Please note that the meter cannot be used underwater.
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au