ML3 ThetaProbe Soil Moisture Sensor - IC-ML3T
Backorder Now, once ordered your item will dispatch before the 16th of May 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
$1,045.00 AUD Inc. GST




Features:
- With the ML3 ThetaProbe Soil Moisture Sensor its easy to make reliable, accurate soil moisture measurements. Simply insert the soil moisture probe into the soil, connect to your data logger or readout unit, provide 5 to 14 V DC at 18 mA, and within seconds you can be logging soil moisture.
- The ML3 ThetaProbe is robust, buriable and maintenance free (environmentally protected to IP68). It can be easily installed at depth into augered
holes using the optional extension tubes.
- The ML3s excellent salinity response has been characterised at EC values up to 2000 mS.m-1. It also has a wide operating temperature range,
allowing it to be used at temperatures as low as -40 C (non-flexing cables).
- The ML3 can be logged by any Delta-T data logger; it is compatible with any logger that can provide 5 15 V DC excitation power and will accept
the 0 1 V output signal. For portable applications the ML3 connects to the HH2 Moisture Meter and they can be ordered together as the convenient
ThetaKit see below (please note that the HH2 Meter does not provide temperature readings).
- The ML3 ThetaProbe is buriable and its cylindrical shape makes it easy to install in augered holes (45 mm diameter). The tough stainless steel
rods can be replaced if bent or damaged. The threaded base of the sensor can be connected to optional 50 cm and 100 cm extension tubes.
Specifications
- Measurement: Volumetric water content and soil temperature
- Measurement range (Soil moisture): Full accuracy over 0 to 0.5 m3.m-3, Full range : 0 to 1.0 m3.m-3
- Measurement range (Salinity): 50 to 500 mS.m-1
- Measurement range (Temperature): 0 to 40 C
- Accuracy (Soil moisture): +/- 0.01 m3.m-3 (1%)
- Accuracy (Temperature): +/- 0.5 C (0 to 40 C for temp sensor); +/- 0.75 C (-20 to +60 C for temp sensor)
- Output: 0 to 1.0 V differential, Corresponding to 0 to 0.6 m3.m-3
- Power requirement: 5-14 V, around 18 mA for 1s. Minimum 5.5 V with 100 m cable
- Environmental: IP68 (-40 to +70 C)
- Sample volume: around 60 x 30 mm diameter
- Dimensions and weight (Overall): 158 x 40 mm diameter
- Dimensions and weight (Rods): 60 mm x 3.2 mm diameter
- Sensor calibrations: Individual sensors are interchangeable. Recalibration advised every 3 years (depending on use)
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au