Protimeter MMS2 Restoration Kit - IC-BLD8800-C-R
Unfortunately, the MMS2 Restoration Kit has been discontinued and has been replaced by the MMS3 Restoration Kit.
This kit is based around the Protimeter MMS2 and includes all the accessories you need for restoration allowing you to measure surface moisture, moisture underneath surfaces, and ambient air quality. Includes a hammer probe, quick survey stick and other accessories. Appropriate for fire and flood restoration, concrete floor moisture measurement, monitoring indoor air quality and environmental health.
Unfortunately, the MMS2 Restoration Kit has been discontinued and has been replaced by the
MMS3 Restoration Kit.
| The Protimeter MMS2 is the industrys most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to
measure moisture on and below the surface as well as ambient air humidity. With an infrared thermometer to calculate the difference between
dew point and surface temperature, this meter is designed to assess moisture in both new and refurbishing projects, as well as to diagnose
moisture-related problems in existing buildings.
This kit includes accessories that allows you to make WME pin measurements, condensation analysis, non-invasive measurements, and measuring dew point and surface temperatures. Protimeter MMS2 Features: - Pin moisture measurement - Pinless moisture measurement - Ambient relative humidity and temperature measurement - Equilibrium humidity measurement in concrete floors - Psychrometric calculations - Laser pointer surface non-contact temperature measurement - Data logging - Firmware upgradable Protimeter MMS2 Specifications: - Maximum Needle Depth: 0.4 in (10 mm) - Display: Color LCD - Batteries (Included): 1x 9 V - Moisture Measurement Range: Pin (% WME) 8 to 99, readings over 30% are relative. Non-invasive (RF) up to 3/4 in (19mm) deep60 to 1000 (relative) - IR Surface Temperature Probe Range: -10 to 50 C (15 F to 120 F) - Hygrostick Data (Nominal): 30% t 40% RH (+/- 3% RH) at 20 C (68 F); 41% to 98% RH (+/- 2%) at 20 C (68 F). Range: 0 C to 50 C (32 F to 122 F) +/- 0.3 C (0.6 F) - Quickstick Data (Nominal): 0% to 10% RH, +/- 3% RH at 20 C (68 F), 10 to 90% RH, +/- 2% RH at 20 C (68 F), Range:0 C to 50C (32 F to 122 F) +/- 0.3% C (+/- 0.6 F) Nominal response 30% to 90% and back to 30% RH in 45 seconds at 20 C (68 F) - Data Storage: Store up to 1,000 results with date and time stamp from all instrument function - Warranty on mechanical or manufacturing defects. Does not include wearing part or accessories. Kit includes: - Quikstick ST - BLD5060 HD MC Probe - BLD5055 HD hammer - BLD5297 4x hammer pins - BLD5018 Deep wall probes 5" - BLD5086 Cal Check - INS8800 Instructions - BLD7758 Software + Cable - BLD5910 Hard Carry Case Warranty - 2 Years Manufacturer Warranty + Additional 1 Year Instrument Choice Warranty |
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au