Home > Tramex Concrete Determinator
Tramex

Tramex Concrete Determinator

ORDER ME IN
Product code: CDK

Backorder Now, once ordered your item will dispatch before the 10th of May 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).

The Tramex Concrete Determinator extends the capabilities of the Tramex Concrete Moisture Encounter range, the CME5, CMEX5 and older meters CME4 and CMEX2, providing in-situ moisture content readings for concrete.

-Measures moisture content in both the top 20mm layer and within the body of concrete floors and slabs down to an extendable depth of up to 100mm.

-Includes Tramex Concrete Determinator, concrete moisture probe, and carrying case. 

Read more

$1,631.81 AUD + GST
 $1,795.00 AUD Inc. GST
The Concrete Moisture Probe when used with Tramex CME instruments operates on the principle that the electrical impedance of a material varies with its moisture content. The CME instrument is pressed onto the CMP cradle which is pressed onto the material surface with the pins fully compressed and the probe inserted into the pre-drilled 19mm hole to measure the moisture content.
The electrical impedance is measured by creating a low frequency alternating electric field between the electrodes and the probe, to a depth of up to 10cm. This field penetrates the material under test. The very small alternating current flowing through the field is inversely proportional to the impedance of the material. The instrument detects this current, determines its amplitude and thus derives the moisture value.
The Determinator cradle should be flat on the slab surface and the Tramex Concrete Moisture Meter placed and firmly pressed onto the cradle with the pins fully compressed. The probe reads from the bottom, within the body of the slab, up to the surface.
Features:
- Instant and Accurate
- Designed to work in the same drill-hole made for the F2170 test.
- Eliminate confusion between in-situ Relative Humidity tests and surface Moisture Content tests.
- Determine if moisture is coming from below or above the concrete slab surface.
- Determine the type and extent of mitigation if needed.
- Reusable, Extendable, and requires no plastic hole liners.
- Can be used in conjunction with Tramex Concrete Moisture Encounters CME5, CMEX5, (CME4 and CMEX2)

Specifications

Measurement range:
- Moisture Content for Concrete with Tramex CMEX5 and CMEX2: 0 to 6.9%
- Moisture Content for Concrete with Tramex CME5 and CME4: 0 to 6%
Depth of Penetration:
- 3cm probe depth for concrete between 5 to 10cm
- 5.7cm probe depth for concrete between 10 to 15cm
- 8.3cm probe depth for concrete between 15 to 22cm
- 10.8cm probe depth for concrete between 22 to 28cm
General:
- Size: 43.5cm x 36cm x 14cm
- Weight: 2.6kg
- Construction: ABS Body

Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au