Tramex Hand-held Wood Pin Probe (for CMEX5) - HH14TP30B
Product code: HH14TP30B
Heavy-duty Pin-type Wood Probe with Cable and TP30 Pins. - Bayonet type plug connection for use with CMEX5.
$295.454
AUD + GST
$325.00
AUD Inc. GST
1 in stock
Accessory Pack for CME5 & CMEX5 - AP-CM
Product code: AP-CM
The Accessory Pack for the Concrete Moisture Encounter 5 - CME5 and Concrete Moisture Encounter X5 - CMEX5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch.
$211.818
AUD + GST
$233.00
AUD Inc. GST
ASTM F2170 Accessory Pack for CMEX2 & MRH3
Product code: AP-F2170
ASTM F2170 Accessory Pack for CMEX2 & MRH3. Contains 12x reusable Hygro-i2 probes (HIPP12), 1x interface cable (RHIE2), 1x calibration salt check (SAL75), 1x Hygro-i2 Accessory tools (HI-ACC) and 100x 19mm hole liners (RHHL100).
$2,036.363
AUD + GST
$2,240.00
AUD Inc. GST
Tramex Hammer-Action Pin-Type Electrode (For CMEX5)
Product code: HA21SP52-B
Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5.
$518.181
AUD + GST
$570.00
AUD Inc. GST
M 6 stick-in electrode pairs - IC-3700
Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$110.00
AUD + GST
$121.00
AUD Inc. GST
M 25-100 brush electrode pair - IC-3740
Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$160.00
AUD + GST
$176.00
AUD Inc. GST
M 20 drive-in electrode - IC-3300
Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$100.00
AUD + GST
$110.00
AUD Inc. GST
M 18 ram-in electrode - IC-3500
Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$320.909
AUD + GST
$353.00
AUD Inc. GST
B 55 Bl active electrode - IC-13755
Product code: IC-13755
The B 55 Bl active electrode is used together with the BL UNI 10 and other similar hydromettes to provide non-destructive measurement of moisture in building materials. Has a measuring range of 0.3 - 8.5 wt.-%/0.3 - 6.5 CM-%, depending on the tested material.
$500.00
AUD + GST
$550.00
AUD Inc. GST
B 50 active electrode - IC-3750
Product code: IC-3750
The active electrode B 50 is a probe designed for the field of structural moisture using the capacitive high frequeny. The electrode is applicable for all Hydromettes that are using this kind of measuring principle.
ASTM F2170 Accessory Pack for CMEX5 & DL-RHTX
Product code: AP-F2170B
ASTM F2170 Accessory Pack for CMEX5 & DL-RHTX. -Contains 12x reusable Hygro-i2 probes (HIPP12), 1x interface cable (RHIE2B), 1x calibration salt check (SAL75), 1x Hygro-i2 Accessory tools (HI-ACC) and 100x 19mm hole liners (RHHL100).
$2,077.272
AUD + GST
$2,285.00
AUD Inc. GST
Extension Handle & Bracket - E5 HBS
Product code: E5-HBS
The Extension Handle can be used with the ME5, CME5, CMEX5 and Skipper 5 Moisture Meters. -It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
$104.545
AUD + GST
$115.00
AUD Inc. GST
Tramex Contact Temperature Probe - CTP
Product code: CTP
The CTP Contact Temperature Probe is a plug-in accessory probe used with the FeedBack Data Loggers to measure and log surface temperature over time. -Used alongside the Humidity sensor functions in the Data Logger, dew point circumstances can be easily identified.
$104.545
AUD + GST
$115.00
AUD Inc. GST
Short Narrow RH Probe - RHP-SNWB (for CMEX5)
Product code: RHP-SNWB
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$392.727
AUD + GST
$432.00
AUD Inc. GST
Narrow Ambient RH Probe - RHP-NWB (for CMEX5)
Product code: RHP-NWB
The Tramex 260mm Narrow Wand Relative Humidity Probe with bayonet connection for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$490.909
AUD + GST
$540.00
AUD Inc. GST
Short Ambient RH Probe - RHP-SWB (for CMEX5 and MEX5))
Product code: RHP-SWB
Short, ambient, relative humidity probe to evaluate moisture conditions within building structures using Hygro-i2® technology. -Measures relative humidity, temperature, dew point temperature and grains per pound humidity ratio. -Its speed and accuracy makes it appropriate for the evaluation of moisture conditions of wall and cavity structures as well as ambient air conditions within the building envelope.
$322.727
AUD + GST
$355.00
AUD Inc. GST
Tramex TP20 - Spare Pins For PTM2
Product code: TP20
Pack of 10 Spare pins for built-in electrodes on Professional PTM2.0 Pin Meter.
$86.363
AUD + GST
$95.00
AUD Inc. GST
Larger Single Meter Case for CMEX5 - ALLPOUCH5
Product code: ALLPOUCH5
Tramex Single Meter Case with Hard Shell and Zipper for CMEX5.
$43.636
AUD + GST
$48.00
AUD Inc. GST
Tramex ME5 Calibration Check Box - CALBOXME5
Product code: CALBOXME5
The Tramex ME5 calibration check box is used for checking readings on the Tramex Moisture Encounter 5 (ME5) non-destructive impedance type moisture meters. This process allows the user to verify that the instrument is still performing within tolerances deemed acceptable by Tramex.
$139.09
AUD + GST
$153.00
AUD Inc. GST
Short Narrow RH Probe - RHP-SNW (for CMEX2 and MRH3)
Product code: RHP-SNW
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$356.363
AUD + GST
$392.00
AUD Inc. GST
Narrow Ambient RH Probe - RHP-NW (for CMEX2 and MRH3)
Product code: RHP-NW
The Tramex 260mm Narrow Wand Relative Humidity Probe for CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$454.545
AUD + GST
$500.00
AUD Inc. GST
Long Ambient RH Probe - RHP-LW (for CMEX2 and MRH3)
Product code: RHP-LW
Long, ambient, RH probe to evaluate moisture conditions within the building structure. Ideal for deep cavity inspection.