Digital EC probe for Edge - IC-HI763100
Product code: IC-HI763100
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. The HI 763100 is a potentiometric probe with platinum sensors making it suitable for measuring high or low conductivity ranges. Has a builtin microchip that stores calibration data. For Hanna Edge pH/EC/DO meters.
$789.20
AUD + GST
$868.12
AUD Inc. GST
CONSEN91W Conductivity/Temperature Electrode
Product code: CONSEN91W
Eutech Conductivity Electrodes are used in conductivity meters in various applications. Get quick and accurate conductivity measurements in the field, laboratories, and schools.
$549.70
AUD + GST
$604.67
AUD Inc. GST
Ohaus Starter Conductivity Electrode for pure water - IC-STCON7
Product code: IC-STCON7
The STCON7 is especially designed for low conductivity measurements in mediums such as pure or distilled water. It also has a built-in temperature sensor for automatic temperature compensation.
$989.84
AUD + GST
$1,088.82
AUD Inc. GST
Ohaus Starter Conductivity Electrode - IC-STCON3
Product code: IC-STCON3
The STCON3 utilizes the 4-ring potentiometric method for measuring conductivity, which incorporates a series of four stainless steel rings formed into the probe shaft. This design completely eliminates polarization, which occurs with the 2-plates amperometric method.
$605.22
AUD + GST
$665.74
AUD Inc. GST
LAQUAtwin Conductivity Sensor - S070
Product code: S070
LAQUAtwin Conductivity Sensor - Replacement sensor for the EC-11, EC-22 and EC-33, along with the B-771
$119.00
AUD + GST
$130.90
AUD Inc. GST
LAQUAtwin Salt Sensor - S021
Product code: S021
LAQUAtwin Salt Sensor - r eplacement sensor for the Salt-22 and B-721
$179.00
AUD + GST
$196.90
AUD Inc. GST
$209.30
AUD + GST
$230.23
AUD Inc. GST
S071 Salt EC Sensor for LAQUAtwin Salt11
Product code: S071
S071 Salt EC Sensor for LAQUAtwin Salt11.
$119.10
AUD + GST
$131.01
AUD Inc. GST
Standard Conductivity/Temperature electrode k=1 - 9383-10D
Product code: 9383-10D
The Conductivity Cell (Submersible Type) 9383-10D is for general measurement purposes and it is waterproof. Plastic body, Titanium/Platinum black, k=1, conductivity cell with integrated temperature sensor. It can be used with all HORIBA cond. meters. -
$419.50
AUD + GST
$461.45
AUD Inc. GST
9371-10D Conductivity Cell
Product code: 9371-10D
Conductivity cell for measuring Ultra Pure Water samples. Specifically made to measure organic solvents. Low conductivity measurements (0.01~500 µS/cm) with BNC connector. This cell can be connected with the meters which equip BNC connector such as the Horiba 200/F-70/1500/2000 series.
$749.50
AUD + GST
$824.45
AUD Inc. GST
TPS Ranger Conductivity Sensor - EC-100
Product code: EC-100
Conductivity sensor for the TPS Ranger. Built to last, this is a rugged sensor made from graphite that can withstand the harshest of environments. Does not use any fragile sensing plates or glass; can be cleaned in however way you need to on the field. Measures, EC, TDS and Salinity. Factory-calibrated; Zero EC and temperature calibration Compatible with multiple buffer sets and with built-in health tracking to monitor the health of the sensor. Requires a cable, sold separately.
$839.40
AUD + GST
$923.34
AUD Inc. GST
Digital Conductivity/Temperature Probe for HI98199 - IC-HI763093
Product code: IC-HI763093
The HI763093 is a digital four-ring conductivity probe for use with the HI98199 portable multiparameter pH, EC, and DO meter. Can be set to display readings as conductivity, TDS and/or salinity. Constructed of durable ABS plastic with waterproof Quick Connect DIN Connector. With integrated temperature sensor for temperature compensated measurements.
$659.10
AUD + GST
$725.01
AUD Inc. GST
2310T-S Conductivity/Temp. Electrode, 8pin
Product code: IC-2310T-S
Apera Instruments 2310T-S Conductivity/Temp. electrode is designed for conductivity measurement in the high range (20 to 2,000 mS/cm, K=10). The electrode is equipped with platinum black coated ring sensor and provides stable and accurate high range conductivity measurement. The integrated thermistor allows simultaneous temperature measurement and thus automatic temperature compensation. Accuracy: +/- 1.5% of final value; Without calibration, the accuracy is +/- 10% F.S Suitable for highly concentrated electrolytes, salt water and other solutions with high conductivity.
$229.10
AUD + GST
$252.01
AUD Inc. GST
9382-10D Conductivity Cell (Submersible Type)
Product code: 9382-10D
Conductivity Cell (Submersible Type). Titanium coated with platinum black, plastic body. Measurement Range: 1 uS/cm to 100 mS/cm. With integrated temperature sensor. Cable Length: 1m.
$419.40
AUD + GST
$461.34
AUD Inc. GST
CONSEN91B Conductivity Electrode
Product code: IC-CONSEN91B
Conductivity electrode with stainless steel rings, PBT and ultem body. -Range: 0 to 150 mS -Temperature Range: 0 to 80 C
$469.60
AUD + GST
$516.56
AUD Inc. GST
Replacement conductivity sensor for PH7200 & TDS7021 - 700E-C
Product code: 700E-C
Replacement conductivity sensor for PH7200 & TDS7021
$64.00
AUD + GST
$70.40
AUD Inc. GST
Conductivity electrode (immersion.), cell const. 1cm-1 k=1 - 3552-10D
Product code: 3552-10D
The Conductivity Cell (Submersible Type) 3552-10D is for general meassurement purposes and provided as a standard accessory for the DS-10 series. It can be used with all HORIBA cond. meters.
$779.60
AUD + GST
$857.56
AUD Inc. GST
Conductivity electrode (immersion.), cell const. 10cm-1 k=10 - 3553-10D
Product code: 3553-10D
The Conductivity Cell (Submersible Type) 3553-10D is for high conductivity water meassurement. It can be used with all HORIBA cond. meters.
$869.40
AUD + GST
$956.34
AUD Inc. GST
Conductivity electrode (flow), small sample, cell const. k=10 - 3574-10C
Product code: 3574-10C
The Conductivity Cell (Flow Type) 3574-10C is for column chromatography using a very small amount of sample. It can be used with all HORIBA cond. meters.
$1,479.60
AUD + GST
$1,627.56
AUD Inc. GST
Conductivity electrode (flow), cell const. 1cm-1 k=1 - 3562-10D
Product code: 3562-10D
The Conductivity Cell (Flow Type) 3573-10C is for high conductivity water meassurement. It can be used with all HORIBA cond. meters.
$1,629.10
AUD + GST
$1,792.01
AUD Inc. GST
Conductivity electrode (flow), cell const. 10cm-1 k=10 - 3573-10C
Product code: 3573-10C
The Conductivity Cell (Flow Type) 3573-10C is for high conductivity water meassurement. It can be used with all HORIBA cond. meters.
$1,629.00
AUD + GST
$1,791.90
AUD Inc. GST
Conductivity electrode (flow), cell const. 0.1cm-1 k= 0.1 - 3561-10D
Product code: 3561-10D
The Conductivity Cell (Flow Type) 3561-10D is for low conductivity water (pure water or other) meassurement. It can be used with all HORIBA cond. meters.
$1,359.00
AUD + GST
$1,494.90
AUD Inc. GST
Eutech EC/TDSTestr 11+ Sensor Module - IC-ECTDSSENSORPLUS
Product code: EC-TDSSENSORPLUS
Replacement sensor module for use with Eutech ECTestr 11+, TDSTestr 11+ tester
$139.50
AUD + GST
$153.45
AUD Inc. GST
Eutech EC/TDSTestr 11 Sensor Module - IC-ECTDSSENSOR
Product code: IC-ECTDSSENSOR
Replacement sensor module for use with Eutech ECTestr 11, TDSTestr 11, SaltTestr 11 tester
$89.30
AUD + GST
$98.23
AUD Inc. GST