ACTL Series Split-Core Current Transformer - 5 Amps
Product code: IC-ACTL-0750-005
The patented Accu-CT split-core current transformer technology delivers exceptional linearity and low-end accuracy. Developed specifically for solar inverter, variable speed motor drive, and other applications where there are large variations in current. 5 amps model. The 100:1 turndown ratio of Accu-CTs is ten times better than industry standard CTs. The unique one-handed opening and closing mechanism makes installation a snap.
$109.40
AUD + GST
$120.34
AUD Inc. GST
Replacement O-ring kit (EPDM) - IC-U12-015-ORING-E
Product code: IC-U12-015-ORING-E
Replacement O-ring kit (EPDM)
$47.00
AUD + GST
$51.70
AUD Inc. GST
Replacement DO Sensor Cap - IC-U26-RDOB-1
Product code: IC-U26-RDOB-1
The Replacement DO Sensor Cap replaces the original DO sensor cap that's included with the HOBO DO Data Logger. The DO sensor caps have a 6-month deployment life. (The caps expire 7 months after initialization to allow some time before and after the deployment.)
$329.10
AUD + GST
$362.01
AUD Inc. GST
Cable Caddy - IC-M-CDY
Product code: IC-M-CDY
This accessory provides a convenient place to organize and mount excess sensor cable.
$309.00
AUD + GST
$339.90
AUD Inc. GST
Voltage Input Cable for Hobo Data Loggers - CABLE-2-5
Product code: CABLE-2-5-STEREO
The CABLE-2-5-STEREO voltage input cable can be attached to a wide variety of loggers Hobo Data Loggers.
$44.00
AUD + GST
$48.40
AUD Inc. GST
TidbiT Boot Black - IC-BOOT-TIDBIT-BK
Product code: IC-BOOT-TIDBIT-BK
The optional TidbiT thermoplastic elastomer boot provides cushioning for use in harsh conditions offered in black to minimize underwater visibility. Five boots included.
$69.20
AUD + GST
$76.12
AUD Inc. GST
Smart Sensor Consolidator Box - IC-S-ADAPT-6
Product code: IC-S-ADAPT-6
Allows users to connect up to six Smart Sensors in a water-resistant enclosure to one sensor extension cable back to an RX3000, U30, H22, or H21 logger.
$399.50
AUD + GST
$439.45
AUD Inc. GST
Pendant Replacement Parts Kit - IC-UA-PARTSKIT
Product code: IC-UA-PARTSKIT
Pendant replacement parts kit includes pendant case, end cap, O-ring, two screws, and silicone-based O-ring grease.
$59.90
AUD + GST
$65.89
AUD Inc. GST
Light Sensor Level - IC-M-LLA
Product code: IC-M-LLA
Simply drop the light sensor level over the PAR or solar radiation sensor to determine if the sensor is level. Purchase one for use on any number of light sensors.
$149.20
AUD + GST
$164.12
AUD Inc. GST
Light Sensor Bracket - IC-M-LBB
Product code: IC-M-LBB
The light sensor bracket is designed for use with tripods, masts, or flat surfaces. Use to avoid obstructions and shadows that could affect your PAR or solar radiation measurements. Includes leveling screws.
$149.20
AUD + GST
$164.12
AUD Inc. GST
HOBO Water Level Logger Starter Kit 4 Meter - KIT-S-U20-04
Product code: KIT-S-U20-04
Combining high accuracy water level measurements with out-of-the-box convenience, this kit includes everything needed to start logging right away in wells, streams, lakes and freshwater wetlands
$1,819.50
AUD + GST
$2,001.45
AUD Inc. GST
$2,219.70
AUD + GST
$2,441.67
AUD Inc. GST
HOBO Water Temp Pro Protective Boot for U22 Loggers - White- IC-BOOT-WHT
Product code: IC-BOOT-WHT
The optional HOBO Water Temperature Pro thermoplastic elastomer boot provides cushioning for use in harsh conditions; offered in white to minimize solar radiation absorption.
$59.60
AUD + GST
$65.56
AUD Inc. GST
HOBO Water Temp Pro Protective Boot for U22 loggers - IC-BOOT-BLK
Product code: IC-BOOT-BLK
The optional HOBO Water Temperature Pro thermoplastic elastomer boot provides cushioning for use in harsh conditions; offered in black to minimize underwater visibility.
$59.90
AUD + GST
$65.89
AUD Inc. GST
HOBO Serial Interface Cable for PCs (Compatible with H series Loggers) - IC-CABLE-PC-3.5
Product code: IC-CABLE-PC-3.5
Interface Cable for PC computers.
$59.00
AUD + GST
$64.90
AUD Inc. GST
HOBO Replacement Battery for U23 loggers - IC-HP-B
Product code: IC-HP-B
Replacement battery for HOBO U23 Data loggers
$37.00
AUD + GST
$40.70
AUD Inc. GST
Half Cross Arm - IC-M-CAB
Product code: IC-M-CAB
For use with Onset tripods or masts, the half cross arm assures unobstructed wind measurement. Half cross arm (49cm/19.2in) provides mounting for one wind sensor.
$199.10
AUD + GST
$219.01
AUD Inc. GST
$229.00
AUD + GST
$251.90
AUD Inc. GST
E50B2 Power and Energy Meter wiring kit - IC-A-E50B2-LEADSET
Product code: IC-A-E50B2-LEADSET
Wiring kit contains the appropriate wires to connect the HOBO UX120-017 Pulse data logger to the E50B2 Power and Energy Meter and electrical panel.
$159.00
AUD + GST
$174.90
AUD Inc. GST
Crimp Sleeve 12 Pack - IC-CABLE-1-CRIMP
Product code: IC-CABLE-1-CRIMP
An envelope of twelve 3/8-inch long stainless steel crimp sleeves for use with 1/16" teflon-coated stainless steel cable.
$129.80
AUD + GST
$142.78
AUD Inc. GST
ConLab 0-300 Volt AC Transmitter Sensor - IC-T-CON-ACT-300
Product code: IC-T-CON-ACT-300
0-300 volt self-powered transformer for monitoring sine wave, single-phase AC voltage. Requires Input Cable for use with U12 loggers.
$479.80
AUD + GST
$527.78
AUD Inc. GST
Clamp Kit for U23-001 - IC-U23-RS-CLAMPKIT
Product code: IC-U23-RS-CLAMPKIT
This clamp allows the U23-001 or U23-004 to be mounted in the RS1 and M-RSA radiation shields. It is NOT required for use with other HOBO Pro v2 models.
$23.00
AUD + GST
$25.30
AUD Inc. GST
Antifouling Protective Cap - IC-U26-GUARD-2
Product code: IC-U26-GUARD-2
The Anti-fouling Protective Guard can be used in place of the standard protective guard for protection against fouling during deployment. The anti-fouling guard uses copper windings to reduce bio-fouling, while still allowing good water flow to the sensor.
$269.90
AUD + GST
$296.89
AUD Inc. GST
AC Power Adapter - 1.25A, 24vdc - AC-SENS-2 - for Loggers - IC-AC-SENS-2
Product code: IC-AC-SENS-2
The AC-SENS-2 is an AC power adapter that provides DC power to sensors that require it. This expands the range of 3rd party sensors that can be used with Onset's HOBO U12, HOBO U30, and HOBO ZW series products.
$39.00
AUD + GST
$42.90
AUD Inc. GST
1-to-2 sensor communication adapter - IC-S-ADAPT-5
Product code: IC-S-ADAPT-5
A 5-inch extension cable with a 2-for-1 splitter TEE junction for doubling Smart Sensor RJ12 port connections. This product is to be used with the H22-001.
$40.00
AUD + GST
$44.00
AUD Inc. GST
1/16" Stainless Steel Cable 300ft - IC-CABLE-1-300
Product code: IC-CABLE-1-300
A 300-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.
$1,359.20
AUD + GST
$1,495.12
AUD Inc. GST
0 to 5 VoltsDC Voltage Input Sensor - IC-CABLE-ADAP5
Product code: IC-CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).
$139.90
AUD + GST
$153.89
AUD Inc. GST
0 to 24 VoltsDC Voltage Input Sensor - IC-CABLE-ADAP24
Product code: IC-CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).
$139.70
AUD + GST
$153.67
AUD Inc. GST
0 to 10 Volts DC Voltage Input Sensor - IC-CABLE-ADAP10
Product code: IC-CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).
$139.60
AUD + GST
$153.56
AUD Inc. GST
AxiTherm USB Interface (Multi-logger)
Product code: IC-USB-INTERFACE-multi-logger
This is a c ommunication interface box for programming and reading rodless temperature loggers. For mapping, it is important to use many loggers at the same time. Multi-sensor interfaces accept a maximum of 6 loggers but you can program multiple 6-packs. -Intended for process validation and thermal mapping operations. -Compatible with ThinLog, HeatLog, AxiMini, and AxiMicro data loggers.
$1,599.00
AUD + GST
$1,758.90
AUD Inc. GST