$119.20
AUD + GST
$131.12
AUD Inc. GST
$39.60
AUD + GST
$43.56
AUD Inc. GST
30W 240V Temperature Controlled Soldering Iron - ECTS1540
Product code: ECTS1540
30W 240V Temperature Controlled Soldering Iron
$59.70
AUD + GST
$65.67
AUD Inc. GST
$29.60
AUD + GST
$32.56
AUD Inc. GST
$49.30
AUD + GST
$54.23
AUD Inc. GST
$37.60
AUD + GST
$41.36
AUD Inc. GST
$22.80
AUD + GST
$25.08
AUD Inc. GST
ESD Safe Goot Temperature Controlled Soldering Station Digital Display
Product code: ECTS1440
ESD Safe Goot Temperature Controlled Soldering Station w/- Digital Display
$549.50
AUD + GST
$604.45
AUD Inc. GST
Goot 240V 46W 240V Soldering Iron - ECTS1430
Product code: ECTS1430
Goot 240V 46W 240V Soldering Iron
$149.704
AUD + GST
$164.67
AUD Inc. GST
$69.80
AUD + GST
$76.78
AUD Inc. GST
$19.80
AUD + GST
$21.78
AUD Inc. GST
Digital TV Signal Strength Meter - IC-LT3332
Product code: IC-LT3332
Take out the stress from installing your digital TV antenna by using this DVB-T signal strength meter. No more multiple trips up to your roof to get that perfect picture. Connect the pocket sized DVB-T signal strength meter and adjust the angle of your digital TV antenna, the easy to read LED indicator lets you know when you've hit the right spot. Adaptors included.
$69.80
AUD + GST
$76.78
AUD Inc. GST
Kyoritsu 6305-03 Digital AC Power Analyzer
Product code: 6305-03
The Kyoritsu 6305 is a very easy to use power and energy logger, designed for use in both single phase and three phase electrical systems. Featuring a large LCD display with easy to read information presented in a clear and orderly manner, the Kyoritsu 6305 can monitor voltage, current, frequency and power in real time, or using an SD card.
$7,889.90
AUD + GST
$8,678.89
AUD Inc. GST
Testo 745 Non-contact voltage tester
Product code: IC-0590-7450
The testo 745 non-contact voltage tester is ideally suited for fast initial checking of any suspected fault sources. It filters high-frequency interference signals and has a two-stage sensitivity setting.
$86.00
AUD + GST
$94.60
AUD Inc. GST
Testo 750-1 - Digital Voltage Tester
Product code: IC-0590-7501
The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. The testo 750-1 offers low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.
$120.00
AUD + GST
$132.00
AUD Inc. GST
Testo 750-2 - Digital Voltage Tester
Product code: IC-0590-7502
The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. The testo 750-2 features single pole phase testing, RDC/RC trigger function, low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.
$179.20
AUD + GST
$197.12
AUD Inc. GST
Testo 750-3 - Digital Voltage Tester
Product code: IC-0590-7503
The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. The testo 750-3 features single pole phase testing, RDC/RC trigger function, LC dispplay, low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.
$256.00
AUD + GST
$281.60
AUD Inc. GST
Testo 755-1 current/voltage tester
Product code: IC-0590-7551
The testo 755 automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy. Features include polarity detection for DC circuits, 3-phase sequence check with motor rotation indication and single lead voltage test with audible indication.
$351.00
AUD + GST
$386.10
AUD Inc. GST
Testo 755-2 current/voltage tester
Product code: IC-0590-7552
The 755-2 is suitable for determining voltage or de-energization, checks voltage level and continuity and measures flow of current along with current consumption. It is a simple task to change faulty measuring tips - without needing to replace the instrument. And the automatic measurement parameter detection and integrated torch make operation and measurement particularly easy and reliable.
$430.00
AUD + GST
$473.00
AUD Inc. GST
Testo 760-1 Digital Multimeter with Auto-test and Capacitance
Product code: IC-0590-7601
The Testo 760-1 uses Testo's exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring. The testo 760-1 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections.
$248.00
AUD + GST
$272.80
AUD Inc. GST
Testo 760-2 digital multimeter with auto test, capacitance, TRMS and low pass filter
Product code: IC-0590-7602
The testo 760-2 digital multimeter is the allrounder for all important electrical measuring tasks. Thanks to the automatic detection of measurement parameters, it offers the greatest possible reliability for every application. You can also measure current in the uA range and determine the true root mean square using this digital multimeter.
$410.00
AUD + GST
$451.00
AUD Inc. GST
Kyoritsu 5406A Digital RCD ELCB Tester with Auto Ramp Function
Product code: 5406A
The Kyoritsu 5406A digital RCD tester is capable of testing a large variety of RCDs and features an auto ramp function. Designed to comply with an IP54 rating, the 5406A is comprised of a custom microprocessor to achieve high accuracy and reliability.
$519.50
AUD + GST
$571.45
AUD Inc. GST
1 in stock
MT933 Cable Length Meter
Product code: MT933
The MT933A is a 20,000 count handheld battery operated metric cable length meter that quickly measures any reeled wire or cable up to 30,000m and with gauges ranging from 0.15mm to 240mm. Within seconds cables can be measured and digitally displayed without the cumbersome task of unrolling cable reels. Measures up to 30,000m of cables. Can identify 20 Standard cable types and 20 pre-set wire gauge settings. Appropriate for copper and aluminum wires.
$449.40
AUD + GST
$494.34
AUD Inc. GST
MT900 TDR Cable Length Meter
Product code: MT900
The MT900 TDR Cable Length Meter is a precision meter that uses TDR (Time domain reflectometer) technology to measure cable length. The meter can be used for any cable consisting of at least two insulated metallic elements, one of which may be the sheath or shield of the cable. Measures copper cable up to 3.0km. Has an automatic internal matching network to allow testing with an automatic selection range, which correspond to power, telephone, CAT 5 and Coax cables. Can store up to 99 traces for future reference.
$409.60
AUD + GST
$450.56
AUD Inc. GST
UT12M AC Voltage Detector - UT12M
Product code: UT12M
The UT12M is a professional grade voltage detector designed to be used in the harsh environments. This model can also be used to detect magnetic fields. With Magnetic solenoid detection mode. IP67 dust/water resistant and can withstand 2 meters drop. Built with Audible (buzzer) and visual (LED) indication.
$47.00
AUD + GST
$51.70
AUD Inc. GST
UT12E AC Voltage Detector - UT12E
Product code: UT12E
The UT12E is a professional grade voltage detector designed to be used in the harsh environments. Wit a Frequency Range of 50/60Hz. IP67 dust/water resistant and can withstand 2 meters drop. Built with Audible (buzzer) and visual (LED) indication.
$41.00
AUD + GST
$45.10
AUD Inc. GST
PoE Pro Tester - IC-R158006
Product code: IC-R158006
The PoE Tester is a multifunction tool that identifies the Class of the PoE source, injector type and power available to a PoE device regardless of cable length, cable quality or other factors. Identifies the PoE source, class, IEEE standard and power available during installation, troubleshooting or maintenance. Test results are stored in real-time on the free AnyWARE mobile app and are seamlessly uploaded to AnyWARE Cloud where professional PDF reports are generated. Also detects cabling issues and can troubleshoot devices up to 90W.
$1,369.20
AUD + GST
$1,506.12
AUD Inc. GST
NAVITEK NT PLUS - IC-R151005
Product code: IC-R151005
The new NaviTEK NT Plus is a network tester for troubleshooting and maintenance of active and passive copper networks with touch screen. Has an autotest button that performs a suite of network tests (Ping, DNS, Gateway, Traceroute). Network Probe provides detailed port and network information of each device. Internal memory for 5000 test reports.
$2,259.00
AUD + GST
$2,484.90
AUD Inc. GST
FiberTEK IV-MM LED and SM Laser Kit - IC-R164010
Product code: IC-R164010
FiberTEK IV combination MM/SM kit with LED MM sources and laser SM sources. FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing. Flashes red to warn of light from other sources, green when linked to FiberTEK IV. Red laser light source to visually pinpoint faults and locate fiber ports. Supports all common connector types. Compatible with all LanTEK IV models.
$18,299.50
AUD + GST
$20,129.45
AUD Inc. GST
LanTEK IV-S 3000MHz Cable Certifier (With PL/CL Adapters) - IC-R163009
Product code: IC-R163009
The LanTEK IV-S R163009 is a 3000MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$18,299.30
AUD + GST
$20,129.23
AUD Inc. GST