Bluelab pH and Conductivity Starter Pack - IC-PENSTP
Product code: IC-PENSTP
The Bluelab pH and Conductivity starter pack gives growers the capability to manage and check their nutrient solution. With an easy to use-interface these pens are the perfect tool for small and professional growers alike. Both pens have temperature measurement capability which can be displayed in either Celsius or Fahrenheit. The pH Pen requires a simple two-point calibration (reference sachets included), that takes less than a few minutes. Accurate to 0.1 pH it will help ensure you always feed the right nutrients to your plants. The conductivity pen is factory calibrated & ready to use out of the box, and can display measurements in EC, 500 ppm (TDS) or 700 ppm scales.
$312.40
AUD + GST
$343.64
AUD Inc. GST
4 in stock
Portable pH, high range EC & TDS and Temperature Meter - HI 991301
Product code: HI991301
High Range EC & TDS. The HI 991301 has been designed to offer you pH, conductivity, total dissolved solids and temperature measurements all in a slim, lightweight, portable unit.
$1,009.60
AUD + GST
$1,110.56
AUD Inc. GST
Amprobe LED Light Meter - IC-LM-200
Product code: IC-LM-200
Amprobe's LM-200 is a professional light meter designed to measure light output from LED sources.
$405.00
AUD + GST
$445.50
AUD Inc. GST
Waterproof Pen Tester - Conductivity-TDS-Salt-Temp - TDS7021
Product code: TDS7021
Waterproof Pen Tester - Conductivity/TDS/Salt/Temp
$150.00
AUD + GST
$165.00
AUD Inc. GST
HI98301, DiST 1 TDS Tester
Product code: HI98301
DiST's are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS
$109.76
AUD + GST
$120.74
AUD Inc. GST
1 in stock
Lighthouse 3016-IAQ Handheld Particle Counter - IC-402997225-3
Product code: IC-402997225-3
The 3016-IAQ is a hand-held particle counter, featuring Mass Concentration Mode that approximates density in ug/m3. Providing up to 6 particle size channels of simultaneous counting, Lighthouse Handheld Particle Counters can display cumulative and differential particle count data as well as Temperature/Relative Humidity data on the fast and easy to read color touch screen.
$8,412.00
AUD + GST
$9,253.20
AUD Inc. GST
uHoo Aura
Product code: IC-uHooAura
The uHoo Aura is wall-mounted/table top wireless, modular environmental air quality monitor that measures temperature, relative humidity, carbon dioxide (CO2), TVOC, Particulate Matter (PM1, PM2.5, PM4, PM10), formaldehyde, carbon monoxide (CO), air pressure, light, and noise. -Different combinations are available and can be expanded to measure other parameters such as Nitrogen Dioxide, Ozone, oxygen, etc. -Can connect through ethernet, WiFi or IOT. -Has datalogging function for measurements, with a logging interval once per minute, stored in its internal memory or to the cloud.
1 in stock
Iron Low Range Checker HC colorimeter (Range 0 to 999 ppb (ug/l))
Product code: IC-HI746
The Hanna Iron Low-Range Checker bridges the gap between simple chemical test kits and professional instrumentation. It uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit. - Compact, Portable Design - Built-in Timer - One-Button Operation
$109.50
AUD + GST
$120.45
AUD Inc. GST
1 in stock
testo 310 II - Flue Gas Analyzer with Printer
Product code: IC-0563-3105
The new testo 310 II provides individual support for daily measurement tasks such as maintenance of hot water and residential heating systems need a reliable and stable measuring instrument with which they can easily perform their measuring tasks such as exhaust gas analyses. Simultanelously shows all relevant measurement parameters by (O2, CO, CO2, flue gas and ambient temperature, CO environment, draught and pressure) at a glance. Provides convinient data transfer, analysis, and conduct additional measurements using the testo Smart app. This is a complete kit that includes calibration protocol for the measurement of O2, CO, hPa and °C, probe 180 mm with cone, silicon hose for pressure measurement, particle filters 5 off., Bluetooth/IRDA printer and case.
$1,489.00
AUD + GST
$1,637.90
AUD Inc. GST
Moisture Encounter MEX5
Product code: MEX5
The Tramex Moisture Encounter MEX5 is a digital Dual-Depth, non-destructive moisture and humidity meter, ideal for surveying moisture and humidity conditions in building structures. Measures moisture content on wood and drywall. Can also be used to make comparative readings in roofing, plaster, tile and masonry. Features dual-depth measuring range comparing both deep and shallow penetration readings. Has a built in hygrometer and infrared surface thermometer for monitoring ambient conditions.
$1,381.818
AUD + GST
$1,520.00
AUD Inc. GST
ORP/Temperature Tester - IC-HI98120
Product code: IC-HI98120
The HI98120 is a waterproof ORP and temperature handheld meter. The housing of this tester is completely sealed to protect against the intrusion of water and is also designed to float if accidentally dropped into a body of water.
$289.30
AUD + GST
$318.23
AUD Inc. GST
Protimeter Mini C - IC-BLD2001
Product code: IC-BLD2001
The Protimeter Mini C is a low cost, highly durable moisture meter designed specifically for the wood floor installation industry. The Protimeter Mini C is a pin type moisture meter that displays instant moisture content results on its 6 to 30% LED scale.
$289.40
AUD + GST
$318.34
AUD Inc. GST
pH/ORP/Temperature Laboratory Bench Meter
Product code: IC-MW150-MAX
The MW150 MAX is an advanced pH/ORP/Temp microprocessor-based bench meter. It is ideal for students and technicians who need fast and reliable measurements
$699.40
AUD + GST
$769.34
AUD Inc. GST
Protimeter MMS3 Restoration Moisture Meter Kit with Accessories
Product code: IC-BLD9800-C-R
The Protimeter MMS3 is a Bluetooth moisture meter for building materials such as wood, concrete and drywall. -Pin moisture meter that offers fast, accurate non-destructive moisture measurement with built in calibration. -Can store up to 10,000 records through the manual or automatic datalogging feature. -Data transfer in real-time using Bluetooth technology. -Includes additional accessories used for restoration such as the HD hammer electrodes and hammer pins.
$2,259.70
AUD + GST
$2,485.67
AUD Inc. GST
1 in stock
Bluelab Combo Meter with Leap pH Probe - IC-METCOMPLUS
Product code: IC-METCOMPLUS
The Bluelab Multimedia pH meter is a fast and accurate pH and conductivity meter designed to test in different mediums under rough environmental conditions. This package includes the Bluelab Leaf sensor that measures pH, conductivity and temperature at the same time. Makes pH measurements in increments of 0.1 pH in a variety of growing media such as nutrient solution, soil, coco coir, rockwool, potting mix and many other media types. Comes with a durable spear tip for direct root-zone measurements. Calibration is simple with one push button on the meter.
$429.00
AUD + GST
$471.90
AUD Inc. GST
2 in stock
WP-81 pH-Wide-Range Conductivity/TDS/ATC/Temp meter with 1m pH & Cond sensor
Product code: WP811-1211321
The WP-81 is designed for maximum durability in the harshest conditions, made with IP67 enclosure and IP65 connectors. Complies with GLP standards, stores the date, time and results of the last calibration. All readings stored in memory are stamped with the date and time. Includes 1m pH and Conductivity sensors.
$1,699.40
AUD + GST
$1,869.34
AUD Inc. GST
Digital Fruit Firmness Tester
Product code: HPE-III-FFF
Digital fruit firmness tester to determine ripeness. -Non-destructive type tester. -Different anvils available for various fruits. -Data logging. -High quality manufactured in Germany.
T-T-100 Aggrameter
Product code: T-T-100
The T-T-100 Aggrameter is used for instantaneous determination of the moisture content of sand, fine aggregate and coarse aggregate using a unique microwave sensor. -Fast, accurate and easy to use: Just insert the prongs into the test sample and read the results. -Can store up to 150 readings (time and date stamped). -For use only with sand and aggregates.
$4,935.00
AUD + GST
$5,428.50
AUD Inc. GST
Horiba U-52G Multiparameter Water Quality Meter with GPS (2m cable with calibration certificate) - IC-U52G-2M-Cal
Product code: IC-U52G-2M-Cal
Measure and display up to 11 parameters simultaneously with newly designed control unit and sensor technology. The operator can select which parameters are to be displayed on the screen at any time. Intuitive software assures ease of use and operation efficiency. Experience the durability and performance of a water quality meter that exceeds your expectations in the field testing of groundwater and surface water applications.
$6,869.40
AUD + GST
$7,556.34
AUD Inc. GST
Sushi Rice pH Tester Kit - Sushi-pH-Kit-EXPERTPH
Product code: Sushi-pH-Kit-EXPERTPH
Sushi Rice pH Tester Kit, supplied with PH4-250 and PH7-250 Buffer Solution for easy calibration.
$219.80
AUD + GST
$241.78
AUD Inc. GST
TROTEC BM31WP Moisture Indicator
Product code: BM31WP
The appSensor BM31WP is an electronic moisture indicator that enables you to capacitive determine moisture on the close to surface of wall, ground or ceiling non-destructively in combination with MultiMeasure Mobile App.
$279.50
AUD + GST
$307.45
AUD Inc. GST
Tramex Water Damage Restoration Inspector Kit - WDIK
Product code: WDIK
Complete moisture meter kit for water damage restoration of buildings and building materials with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex ME5 for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. -The Tramex Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe.
$3,490.10
AUD + GST
$3,839.11
AUD Inc. GST
Iron (Fe+2 & Fe+3) Chemical Test Kit with Checker Disc (0.0-10.0 mg/L)
Product code: IC-HI38041
The HI38041 is a chemical test kit that uses the phenanthroline method to measure total iron in the high range. The HI38041 is supplied complete with all of the reagents and equipment necessary including the Checker disc. The Checker disc makes concentration determination more accurate and easier than a typical color comparator. The test kit contains enough reagents to perform 100 tests. - Range: 0.0-10.0 mg/L, good for 100 tests. - Pre-made reagents for ease of use - All reagents marked with expiration date and lot number for traceability - Checker disc for more accurate determination
$149.90
AUD + GST
$164.89
AUD Inc. GST
Waterproof Pocket pH Tester with 0.1 Resolution - pHep - IC-HI98107
Product code: IC-HI98107
The HI98107 pHep features 0.1 resolution with automatic two-point calibration and temperature compensation in a single, portable, pocket device.
$99.20
AUD + GST
$109.12
AUD Inc. GST
Chloride (as Chlorine) Titration-based Chemical Test Kit
Product code: IC-HI3815
The HI3815 is a chemical test kit that measures chloride by titration with mercuric nitrate. The HI3815 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests. - Range: 0 to 100 mg/L Cl - and 0 to 1000 mg/L Cl - - Pre-made reagents for ease of use - All reagents marked with expiration date and lot number for traceability - Manual titration performed with diphenylcarbazone indicator
$89.80
AUD + GST
$98.78
AUD Inc. GST
Mini surface thermometer - IC-0560-1109
Product code: IC-0560-1109
Mini surface thermometer up to 300 C, length 120 mm, broad measurement tip, easily legible display, incl. batteries.
$69.50
AUD + GST
$76.45
AUD Inc. GST
Si-VV3 Vane Thermo-anemometer with Integrated Vane Probe
Product code: SiVV3
Palm-sized Sauermann Si-VV3 vane thermo-anemometer easily measures airflow, air velocity & temperature with its vane probe. -Large vane probe with 2 m (78.74’’) cable. -Magnetic backing for easy fixing & carrying bag. -With Backlit LCD screen.
$219.20
AUD + GST
$241.12
AUD Inc. GST
Standard Plastic Body Gel Filled pH Electrode
Product code: 9652-10D
pH electrode with standard plastic body. -Gel filled electrolyte means no refilling is required. -Submerged measurements in depths up to 1m (for up to 30 minutes). -Waterproof
$229.00
AUD + GST
$251.90
AUD Inc. GST
HI9810312 HALO2 pH Meter for Beer
Product code: HI9810312
Wireless pH tester for measuring the pH of beer and other related samples. -The pH electrode was built with a titanium body and was specifically designed to provide stable pH measurement for mash, cooled wort, and beer samples. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.60
AUD + GST
$285.56
AUD Inc. GST
Bluelab Pulse Multimedia EC/MC Meter - IC-METPULSE
Product code: IC-METPULSE
With the Bluelab Pulse Meter, growers can make better decisions based on data collected from the root zone. This meter measures root zone moisture, conductivity (EC) and temperature measurements with a single click. Measures moisture, conductivity (EC) and temperature. Quickly make measurements with just a click of a button as a benchmark to see if plants are getting enough water or are they receiving too much and in need of flushing. Also has a built-in depth gauge to ensure consistency of measurements.
$467.00
AUD + GST
$513.70
AUD Inc. GST
2 in stock