Environment Meters

Bluetooth Hygrometer - IC-800019

Product code: IC-800019

Sper Scientific’s Bluetooth® Hygrometer Meter is small, light, and simple to use. Displays humidity, wet bulb, dew point and air temperature in C or F on the meter’s large 1.5” backlit display.

$229.10 AUD + GST

$252.01 AUD Inc. GST

1 in stock

Digital Stem Thermometer - Dig-stem-1

Product code: Dig-stem-1

This convenient, handheld thermometer can be used to determine the temperature for many different reasons, including food preparation and brewing. With 2 Year Extended Warranty!

Unfortunately, the QM7316 has been discontinued, check out our other Temperature Meters for more options.

Moisture Encounter Plus Meter - IC-MEP

Product code: IC-MEP

Building moisture inspection tool without causing any damage. - Non-destructive moisture measurements - Wood/timber, drywall/roofing & plaster/brick - Exclusive extra 1 year warranty!

Unfortunately, the MEP has been discontinued and has been replaced by the ME5.

Min-Max Thermometer with Magnet - IC736680

Product code: IC736680

Used in weather stations, cold storage rooms, construction, industry, or anywhere, indoor and out, requiring a record of min/max temperatures. Small floats are pushed to each temperature extreme by the two columns and stay there until reset with the attached magnet.

Unfortunately, the 736680 has been discontinued, check out our other Temperature Meters for more options.

Waterproof Delta T Pocket Wind Meter - Kestrel-3500-DeltaT

Product code: Kestrel-3500-DeltaT

Waterproof Delta T Pocket Wind Meter

Unfortunately, the Kestrel-3500-DeltaT has been discontinued, check out the 3550AG as a possible alternative.

FlashCheck Folding Probe Electronic Thermometer - IC-15000

Product code: IC-15000

The FlashCheck Folding Probe Thermometer, Model 15000, can register temperatures from room temperature to 32F (0C) in just 30 seconds

Unfortunately, the 15000 has been discontinued and replaced by 15051.

Digital Non-Destructive Moisture Meter - MRH3

Product code: MRH3

The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control

Unfortunately, the MRH3 has been discontinued and has been replaced by the MEX5.

Humidity & Temperature Meter with Probe - 0563-6251

Product code: 0563-6251

The compact instrument with built-in humidity probe head for measuring air moisture and temperature

Unfortunately, the 0563-6251 has been discontinued and has been replaced by the 0563-1625.

humimeter BLW Round timber and split logs moisture meter with ram electrode

Product code: IC-humimeterBLW

Moisture meter for measuring wood samples with high water content and requires a large measuring depth such as split logs and round timber. Approrpriate for heating plants that use biomass or wood and suppliers of round timber and split logs.

Unfortunately, the humimeterBLW has been discontinued, check out our other Moisture Meters for more options.

Scarlet Wireless Wind Alarm System - IC-WL-410

Product code: IC-WL-410

The Wireless Wind Alarm System consists of a wind speed sensor and a receiver. The sensor measures wind speed and transmit data to the 5-inch LCD that displays readings on the main page and the history graphs are shown in different pages. Based on the preset values, the receiver can trigger local alarms such as LED lights and buzzer, or trigger external indication via 3 built-in relays when measured wind speeds exceeding the thresholds.

Unfortunately, the WL-410 has been discontinued and has been replaced by the WindPro.

HVAC-R System Analyser & Wireless Logger

Product code: IC-HG3

The HVAC-R System Analyser & Wireless Logger is a measurement and data logging system for HVAC systems that allows users to receive data in-real time and use air flow tests automatically. Includes temperature accessory head and wet and dry bulb thermocouples.

Unfortunately, the HG3 has been discontinued, check out our other HVAC Wireless Loggers for more alternatives.

Waterproof EcoTestr EC Low Tester with ATC, 1 point Calibration - ECO-ECTESTLOW

Product code: ECO-ECTESTLOW

Waterproof EcoTestr EC Low Tester with ATC, 1 point Calibration

Unfortunately, the ECO-ECTESTLOW has been discontinued, check out our other Conductivity, TDS, Salinity Meters for more options.

Waterproof EcoTestr EC High Tester with ATC; 1 point Calibration - ECO-ECTESTHIGH

Product code: ECO-ECTESTHIGH

Waterproof EcoTestr EC High Tester with ATC; 1 point Calibration

Unfortunately, the ECO-ECTESTHIGH has been discontinued, check out our other Conductivity, TDS, Salinity Meters for more options.

Pocket Moisture Meter - IC-850001

Product code: IC-850001

Accurately reads elevated moisture content in various materials for use in building inspection and other industries. Seven material group settings cover various woods, cement, concrete, mortar, plaster, and brick.

Unfortunately, the 850001 and has been replaced by the 850001E.

Pooltest 9 with Bluetooth - IC-SPH7009

Product code: IC-SPH7009

The Pooltest 9 allows for the analysis of the nine most important water quality tests associated with the management of swimming pools and spas. It measures chlorine (total and free), pH, Cyanuric acid, Calcium hardness, Total Alkalinity, Bromine, Copper, Iron and Ozone.

Unfortunately, the SPH7009 has been discontinued, check out our other Colorimeters for more options.

Pooltest 6 in Hard case (0-5 ppm Chl ) - IC-SPH006D

Product code: IC-SPH006D

The Pooltest 6 is a dual light source, waterproof, LCD chlorine meter that can measure chlorine (up to 5 ppm Chl), pH, Cyanuric acid, Calcium hardness, Total Alkalinity and Bromine.

This item has been discontinued, please call 1300 737 871 to discuss an alternative.

Pooltest 6 in Hard case (0-10 ppm Chl ) - IC-SPH006X

Product code: IC-SPH006X

The Pooltest 6 is a dual light source, waterproof, LCD chlorine meter that can measure chlorine (up to 10 ppm Chl), pH, Cyanuric acid, Calcium hardness, Total Alkalinity and Bromine

This item has been discontinued, please call 1300 737 871 to discuss an alternative.

Pooltest 3 in Hard case (0-5 ppm Chl ) - IC-SPH003D

Product code: IC-SPH003D

The Pooltest 3 is a dual light source, waterproof, LCD chlorine meter that measure chlorine (up to 5 ppm Chl), pH and cyanuric acid.

This item has been discontinued, please call 1300 964 137 to discuss an alternative.

Pooltest 3 in Hard case (0-10 ppm Chl ) - IC-SPH003X

Product code: IC-SPH003X

The Pooltest 3 is a dual light source, waterproof, LCD chlorine meter that can measure chlorine (up to 10 ppm Chl), pH and cyanuric acid.

Unfortunately, the IC-SPH003X is discontinued. Checkout the Lumiso Pooltest 3 for an alternative option.

Portable Water Quality Detection Meter - IC-LH-D65

Product code: IC-LH-D65

Total nitrogen meter. Suitable for test COD, ammonia nitrogen, total phosphorus, and total nitrogen of industrial waster water. Convienient, portable and light weight.

Unfortunately, the LH-D65 has been discontinued, check out our other Water Quality Meters for more options.

Portable Turbidity Meter - 2020we-Kit

Product code: 2020we-Kit

Compact handheld water analysis instrument with microprocessor-driven optical system and unique optics configuration. USEPA Compliant Configuration

Unfortunately, the 2020we-Kit is not available, check out our other Turbidity Meters for more options.

Portable pH/EC/TDS Meter - HI9813-5

Product code: IC-HI9813-5

The HI9813-5 is an economical, water resistant, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be displayed on the LCD and knobs for single point calibration of pH and EC/TDS.

Unfortunately, the HI9813-5 has been discontinued and replaced by the HI9813-6.

Reflectance standard - IC-M512G

Product code: IC-M512G

Reflectance standard for calibrating lux measurement for MAVO-SPOT 2 USB

$495.00 AUD + GST

$544.50 AUD Inc. GST

Backorder Now, once ordered your item will dispatch before the 29th of July 2024, call 1300 737 871 (NZ 0800 737 871) to confirm

Pocket Moisture Level Meter for Wood & Building Materials - IC-QP2310

Product code: IC-QP2310

This is an intelligent wood moisture meter suitable for measuring water content in building materials and wooden fibre articles such as wooden and bamboo objects, cotton, paper etc.

Unfortunately, the QP2310 has been discontinued, check out our other Moisture Meters for more options.

Calibrator, Dual Level, Class 1 (Includes Ga690 Barometer)

Product code: GA607

Calibrator, Dual Level, Class 1 (includes GA690 Barometer). Regular calibration of any sound level meter is called for in virtually all standards, legislation and codes of practice. A calibrator should be purchased with all instruments.

Unfortunately, the GA607 has been discontinued, check out our other Sound Level Calibrators for more options.

Wireless Wind Speed/Direction 4-20 Ma/Pulse Output

Product code: IC-W-110

The W-110 is a wireless wind speed and direction sensor that can connect to different display types to display real time wind speed/direction data with a range of up to 1300 m.

Unfortunately, the W-110 has been discontinued, check out our other Anemometers for more options.

XPLORER 2 Anemo-thermometer - IC-XP-02

Product code: IC-XP-02

The Xplorer 2 is a compact anemometer/temperature meter made for sports, leisure and outdoor activities. It is waterproof, and has a back-lit LCD display.