Scarlet Wireless Data Logger Anemometer - IC-WL-11
Product code: IC-WL-11
The Scarlet WL-11 Wind Speed Data Logger is designed to provide an affordable and easy-to-use solution to wind site evaluation and monitoring wind generator performance in real time.
Scarlet Wireless Anemometer - IC-WR-3
Product code: IC-WR-3
The WR-3 is a long range portable wireless anemometer. It has handheld/portable display unit and sensor suitable for both permanent and temporary installation. Sensor with ball bearings and life time battery ensure long period without servicing.
Scarlet Long Range Wireless Data Logger Anemometer - IC-WL-11X/WSD
Product code: IC-WL-11X/WSD
Long Range Wireless Anemometer with wind speed & direction sensors, display data logger
SALscan10 Pocket Salinity Tester - IC-SALSCAN10
Product code: IC-SALSCAN10
Low concentration pocket salinity tester, with the conductivity measurement mode. - 1 to 3 points push-button calibration - Measures salinity, conductivity & temp. - Accuracy: +-1% F.S
Protimeter MMS2 Survey Moisture Meter Kit - IC-BLD8800-C-S
Product code: IC-BLD8800-C-S
This kit is based around the Protimeter MMS2 and includes all the accessories you need for basic surverying. Includes the MMS2 instrument, short humidity quickstick, hygrostick humidity probe, quickstick external lead, heavy duty moisture probe, deep wall probe (5 inch), calibration check device, instructions, software and cable, and hard carrying case.
Protimeter MMS2 Restoration Kit - IC-BLD8800-C-R
Product code: IC-BLD8800-C-R
This kit is based around the Protimeter MMS2 and includes all the accessories you need for restoration allowing you to measure surface moisture, moisture underneath surfaces, and ambient air quality. Includes a hammer probe, quick survey stick and other accessories. Appropriate for fire and flood restoration, concrete floor moisture measurement, monitoring indoor air quality and environmental health.
Protimeter MMS2 Moisture Meter with Hard Case - IC-BLD8800-C
Product code: IC-BLD8800-C
The Protimeter MMS2 is the industry's most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to measure moisture on and below the surface as well as ambient air humidity. With an infrared thermometer to calculate the difference between dew point and surface temperature, this meter is designed to assess moisture in both new and refurbishing projects, as well as to diagnose moisture-related problems in existing buildings. For use with wood, drywall, building materials, concrete, and fiberglass.
$1,969.40
AUD + GST
$2,166.34
AUD Inc. GST
Protimeter MMS2 Moisture Meter (Meter only) - IC-BLD8800
Product code: IC-BLD8800
The Protimeter MMS2 is the industry's most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to measure moisture on and below the surface as well as ambient air humidity. With an infrared thermometer to calculate the difference between dew point and surface temperature, this meter is designed to assess moisture in both new and refurbishing projects, as well as to diagnose moisture-related problems in existing buildings. For use with wood, drywall, building materials, concrete, and fiberglass.
Protimeter MMS2 Basic Survey Moisture Meter Kit - IC-BLD8800-S
Product code: IC-BLD8800-S
This kit is based around the Protimeter MMS2 and includes all the accessories you need for basic surverying. Includes the MMS2 instrument, Quickstick ST, HD MC probe, Hygrostick, Hygrostick Extended, deep wall probes, CAL check, software, cable and canvas carry pouch.
Protimeter Digital Mini - IC-BLD5702
Product code: IC-BLD5702
The BLD5702 Digital Mini is a pin type, moisture meter to help assess the moisture levels of building materials for constuction, restoration or repair. It has a pin-type measurement function, displays measurements on a large LED screen.
Professional Wood Master Kit
Product code: PTMMK5.1
A kit for instant and accurate measurement of moisture content in a large range of wood species, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building materials.
Professional Wood EZ Kit
Product code: PTMZK5.1
A kit for instant and precise measurement of moisture content in a large range of wood species and wood-based products using pin-type electrodes. Featuring the Tramex PTM Professional moisture meter with its built-in pins and a handheld heavy-duty pin probe, the Professional Wood Kit comes in a Tramex protective heavy-duty carrying case with die-cut foam lining.
Professional Pin-Type Moisture Meter - PTM2
Product code: PTM2
The all new Professional PTM 2.0 is a hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building products.
Professional Ir Camera With Full Videometric
Product code: 0563-0885-V2
The Testo 885-2 is a professional thermal imaging camera. You can carry out completely damage-free tests on materials and components. Thanks to the 320 x 240-pixel detector, in combination with the high-quality Germanium optics, the Testo 885-2 achieves an excellent image quality.
Professional Two Channel Benchtop pH/mV/ISE Meter with 0.001 Resolution - IC-HI3222
Product code: IC-HI3222
The HI3222 is a professional multiparameter benchtop meter. Offering two input channels, this meter is able to measure pH, ORP, ISE, and temperature. The meter comes with Hanna’s HI1131B glass pH electrode and a temperature probe to allow for automatic temperature compensation.
PH Electrode - High Quality (Epoxy Body) - PE-01
Product code: PE-01
PH Electrode - High Quality (Epoxy Body)
Particulate Monitor sensor with the Series 200 Handheld
Product code: IC-PM-200
This kit comes supplied with the IC-PM and the IC-HH S200L handheld monitor. The IC-PM is Aeroqual's portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
P2 Paper moisture meter for kraft paper, packaging paper and paperboard
Product code: IC-P2
Paper moisture meter mainly for kraft paper, packaging paper and paperboard. Quickly and highly accurate measurement using a non-destructive method.
Non-Contact Thermometer with 12 Dot Lasers for Target Area - IC7424
Product code: IC7424
Safely measure temperatures from -50°C up to 600°C in hard to reach places, and hot or hazardous areas. The built-in laser produces 12 points to indicate the 12:1 distance to spot ratio. and an adjustable emissivity setting provides accurate and repeatable measurements based on the type of material you are measuring.
O3 High Sensor Head (0-10 ppm) - IC-SH OZG
Product code: IC-SH-OZG
Fan-sampling gas sensitive semiconductor (GSS) sensor: 0-10 ppm Ozone. Compatible with portable and fixed air quality monitors.
NO2 Sensor Head (0-1 ppm) - IC-SH ENW
Product code: IC-SH-ENW
Fan-sampling gas sensitive electrochemical (GSE) sensor: 0-1 ppm NO2. Compatible with Aeroqual portable and fixed air quality monitors.
Multi-Parameter Water Quality Outdoor Detection Meter - IC-LH-BW5
Product code: IC-LH-BW5
A complete, multi-parameter, water quality detection instrument made for outdoor use. Measures COD, ammonia nitrogen, total phosphorus, and total nitrogen. Import/export through a USB cable. Includes reagents and activators for 50 tests and other accessories like pippettes, fittings, bottles and cables.
Min-Max Thermometer (Push Button Reset) - IC736690
Product code: IC736690
Measures Minimum and Maximum Temperature. Small floats are pushed to each temperature extreme by the two columns and stay there until reset with the attached magnet or by pushing the red button on the front.
Digital LUX Meter - LX101
Product code: LX101
Digital LUX Meter (MI4N). With 2 Year Extended Warranty!
$149.00
AUD + GST
$163.90
AUD Inc. GST
LED Light Meter and Data Logger (LUX & FootCandles) - IC-LX1148SD
Product code: IC-LX1148SD
LED Light Meter LUX & FootCandles and data logger. Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle units.
Large Temperature Display - ICHNI-080
Product code: ICHNI-080
Large Temperature Indicator with range -19.9 to 99.0degC. Can be used in Sauna facility, bathroom, fitness center, hospital, greenhouse, etc. Comes with a Resistance Temperature Detector (RTD) Pt100 on a 1.5 metre lead
LAQUA PH1300-S Benchtop pH/ORP/ION/Temp data log meter kit
Product code: IC-PH1300-S
LAQUA PH1300 Benchtop pH/ORP/ION/Temp data log meter kit. Includes 9615S-10D pH/temp electrode, pH4/7/10 calibration solutions, AC power adapter and electrode stand.
LAQUA PH1100 Benchtop pH/ORP/Temp meter
Product code: IC-PH1100
LAQUA Benchtop pH/ORP/Temp meter. Does not include electrode or calibration solutions.
Infrared Thermometer with Laser & LED (Not suitable for human use)
Product code: TN410LCE
Professional grade, infrared thermometer with K-type input. - IR Range of -60 to 500C - 12:1 distance to spot ratio - With 2 Year Extended Warranty!
INFRARED THERMOMETER TO 535C (Not suitable for human use) - IC-FLUKE-63
Product code: IC-FLUKE-63
The Fluke 63 non-contact thermometer is the ideal professional diagnostic tool for quick and accurate temperature measurements. This handheld portable tool enables professionals to research heating and ventilation problems, monitor the status of electrical motors and electrical panels and diagnose malfunctions with ease.