BLOCK CO2 Data/Alarm System - IC-BLOCKCO2
Product code: BLOCK-CO2
The Block CO2 is a WiFi monitoring and alarm system that gives you an overview of CO2 and temperature within indoor spaces. A good place to use bun green is places where you need an overview of the indoor climate, such as the classroom or the office. Has an internal sensor to measure carbon dioxide, humidity and temperature. Sends email and text alerts when measured reading exceed set limits. Easily get access to charts, graphs and historical records.
$289.00
AUD + GST
$317.90
AUD Inc. GST
8 in stock
testo 316-2 - Gas leak detector
Product code: IC-0632-3162
The testo 316-2 provides you with a quick and reliable means of detecting methane, propane and hydrogen in the surrounding air.
$659.70
AUD + GST
$725.67
AUD Inc. GST
testo 310 II - Flue gas analyzer - 0563-3104
Product code: 0563-3104
The new testo 310 II provides individual support for daily measurement tasks such as maintenance of hot water and residential heating systems need a reliable and stable measuring instrument with which they can easily perform their measuring tasks such as exhaust gas analyses. Simultanelously shows all relevant measurement parameters by (O2, CO, CO2, flue gas and ambient temperature, CO environment, draught and pressure) at a glance. Provides convinient data transfer, analysis, and conduct additional measurements using the testo Smart app. This is a complete kit that includes calibration protocol for the measurement of O2, CO, hPa and °C, probe 180 mm with cone, silicon hose for pressure measurement, particle filters 5 off. and case.
$1,219.50
AUD + GST
$1,341.45
AUD Inc. GST
Kimo CO2 & Temperature Meter - AQ110S
Product code: AQ110S
Kimo CO2 and Temperature Meter (Calibration not included)
$709.20
AUD + GST
$780.12
AUD Inc. GST
Carbon Monoxide & Temperature Meter - IC-GCO2008
Product code: IC-GCO2008
Carbon Monoxide and Temperature Meter, measures Carbon monoxide (CO) and temperature.
$459.00
AUD + GST
$504.90
AUD Inc. GST
Center 412 Hydrogen Gas Leak Detector - CENTER412
Product code: CENTER412
Gas detector for the detection of 5% Hydrogen (H2) + 95% Nitrogen (N2). -Highly sensitive device that can detect hydrogen concentration as low as 5 ppm.
$399.40
AUD + GST
$439.34
AUD Inc. GST
1 in stock
Center 410 Refrigerant Leak Detector - CENTER410
Product code: CENTER410
Refrigerant leak detector for maintaining air-conditioning or cooling systems with compressor and refrigerant. Detects a wide variety of refrigerants including R32, R22, R134a, R1234yf, and more. This meter is normally priced at $429+GST!
$299.00
AUD + GST
$328.90
AUD Inc. GST
5 in stock
UT337A Carbon Monoxide CO Meter - UT337A
Product code: UT337A
The UT337A is a portable meter for detecting carbon monoxide gas. It can measure a wide range of CO concentrations with a short response time. Users can set up both audio and visual alarms.
$179.80
AUD + GST
$197.78
AUD Inc. GST
Extech CO210: Desktop Indoor Air Quality CO2 - CO210
Product code: CO210
CO210 is a Desktop Indoor Air Quality CO2 Monitor/Datalogger. -Features Minimum/Maximum CO2 value recall, year/month/date/time display, and an Automatic Baseline Calibration (minimum CO2 level over 7.5 days) or manual calibration in fresh air. -Measurement ranges are 0 to 9,999 ppm (CO2), 14 to 140°F (-10 to 60°C) for Air Temperature and 0.1 to 99.9% for Relative Humidity.
$639.80
AUD + GST
$703.78
AUD Inc. GST
EXTECH CO250, Portable Indoor Air Quality CO2 Meter-Datalogger
Product code: CO250
Portable Indoor Air Quality CO2 Meter/Datalogger, measures Carbon Dioxide (CO2), Temperature, Humidity, Dew Point, and Wet Bulb
$829.90
AUD + GST
$912.89
AUD Inc. GST
Extech CO240: Indoor Air Quality, Carbon Dioxide (CO2)
Product code: IC-CO240
The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a greenhouse or nursery, to insure optimal plant grown. Complete with six AAA batteries, USB cable, PC software and soft case.
$659.10
AUD + GST
$725.01
AUD Inc. GST
Extech CO220 Desktop Indoor Air Quality CO2 Monitor
Product code: IC-CO220
Measures Carbon Dioxide (CO2), Air Temperature and Humidity with user adjustable visual and audible alarm plus calculates Dew Point and Wet Bulb
$569.50
AUD + GST
$626.45
AUD Inc. GST
Extech CO100 Desktop Indoor Air Quality CO2 Monitor
Product code: IC-CO100
Extech CO100 desktop indoor air quality CO2 monitor. Measures Carbon Dioxide (CO2), Air Temperature and Humidity
$579.90
AUD + GST
$637.89
AUD Inc. GST
Testo 300 Flue Gas Analyzer Kit with Printer - 0564-3002-71
Product code: 0564-3002-71
Flue gas analyzer kit for making measurements involving heating systems. Measures O2 and CO. Includes everything you need including the testo 300 flue gas analyzer, accessories and carrying case. The testo 300 offers intuitive measurement menus and the fast-response Smart-Touch display ensure easy operation like your smart phone. Includes O2 and CO sensor that measures up to 4,000 ppm. The kit comes with a Bluetooth printer for printing graphs and measurement data.
MT980 Halogen Leak Detector
Product code: MT980
The refrigerant leak detector detects all CFC refrigerants such as R-22, R-124, R-11 and R-12, difficult to detect HFC refrigerants such as r32, R-134, R-404A, and new R-22 replacements, R410A and R-407C. Comes with a 16 inch long, slim gooseneck probe to reach tight and difficult areas. Built for one-handed operation. Has an audible alarm feature when the sensor tip is near the leak.
$379.70
AUD + GST
$417.67
AUD Inc. GST
MT180 Carbon Monoxide Meter
Product code: MT180
The MT180 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels. Measurement range of: 1PPM to 1000PPM. It makes a loud buzzer sound when the level increases above 200ppm. The max hold function displays the maximum CO level for comparison.
$479.50
AUD + GST
$527.45
AUD Inc. GST
MT982 Combustable Gas Leak Detector
Product code: MT982
The MT982 is a new technological design for detecting combustible gases. The gooseneck allows the user to find the leaks in the most awkward of places, and is an ideal tool for a variety range of applications where gases need detection in hazardous areas. Designed for one-handed operation to detect presence of combustible gases. Audible and visual indicators help pinpoint leak source. Adjustable “tic” rate helps eliminate background gas concentration in contaminated environments.
$229.40
AUD + GST
$252.34
AUD Inc. GST
testo 310 II - Flue Gas Analyzer with Printer
Product code: IC-0563-3105
The new testo 310 II provides individual support for daily measurement tasks such as maintenance of hot water and residential heating systems need a reliable and stable measuring instrument with which they can easily perform their measuring tasks such as exhaust gas analyses. Simultanelously shows all relevant measurement parameters by (O2, CO, CO2, flue gas and ambient temperature, CO environment, draught and pressure) at a glance. Provides convinient data transfer, analysis, and conduct additional measurements using the testo Smart app. This is a complete kit that includes calibration protocol for the measurement of O2, CO, hPa and °C, probe 180 mm with cone, silicon hose for pressure measurement, particle filters 5 off., Bluetooth/IRDA printer and case.
$1,489.00
AUD + GST
$1,637.90
AUD Inc. GST
Testo 316-3 - Refrigerant Leak Detector
Product code: IC-0563-3163
The testo 316-3 refrigerant leak detector can detect all the most common cooling agents and locate even the smallest leaks. Complies with all important regulations and norms. Can detect all the most common cooling agents: CFCs, HFCs, FCs. Highly sensitive device that can detect even the smallest of leaks. Built for one-hand operation.
$610.00
AUD + GST
$671.00
AUD Inc. GST
Aeroqual Ozone Sensor 0-30ppm (O3)
Product code: IC-SH-EOZH
O3 GSE 0-30ppm Sensor Head, for S500, Ranger and S900.
$1,029.00
AUD + GST
$1,131.90
AUD Inc. GST
testo 300 Professional Kit - Flue gas analyzer (O2, CO up to 4,000 ppm)
Product code: 530564-3073
The testo 300 Professional Kit allows you to measure oxygen and carbon monoxide up to 4,000 ppm with modular gas probe that measures up to 1000°C and Probe filters (T33X range). -The kit includes everything you need to measure flue gas; includes the main unit, oxygen and carbon monoxide sensors, modular flue gas probe (335 mm, Ø 8 mm), Probe filters (T33X range), spare dirt filters, EasyHeat software, and instrument case. -The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. Measures flue gas, draught, pressure, ambient CO and differential temperature. -Comes with modular flue gas probe (335 mm, Ø 8 mm) with quick-change click system enables quick, flexible replacement of the probe shaft. Measures temperature up to 1000 °C.
$5,859.60
AUD + GST
$6,445.56
AUD Inc. GST
testo 300 Intermediate Kit - Flue gas analyzer (O2, CO up to 4,000 ppm)
Product code: 530564-3071
The testo 300 Intermediate Kit allows you to measure oxygen and carbon monoxide up to 4,000 ppm with additional accessories such as a Bluetooth printer and modular gas probe. -The kit includes everything you need to measure flue gas; includes the main unit, oxygen and carbon monoxide sensors, modular flue gas probe (300 mm, Ø 6 mm), Bluetooth printer, spare dirt filters, EasyHeat software, and instrument case. -The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. Measures flue gas, draught, pressure, ambient CO and differential temperature. -Comes with modular flue gas probe (300 mm) with quick-change click system enables quick, flexible replacement of the probe shaft. Measures temperature up to 500 °C.
$3,939.20
AUD + GST
$4,333.12
AUD Inc. GST
testo 300 Basic Kit - Flue gas analyzer (O2, CO up to 4,000 ppm)
Product code: 530564-3070
The testo 300 Basic Kit allows you to measure oxygen and carbon monoxide up to 4,000 ppm. -The kit includes everything you need to measure flue gas; includes the main unit, oxygen and carbon monoxide sensors, basic flue gas probe (300 mm, Ø 6 mm), spare dirt filters, EasyHeat software, and instrument case. -The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. Measures flue gas, draught, pressure, ambient CO and differential temperature. -Comes with the compact basic flue gas probe, 300 mm with integrated thermocouple probe for temperature measurements up to 500 °C.
$2,609.10
AUD + GST
$2,870.01
AUD Inc. GST
testo 300 Domestic Kit - Flue gas analyzer (O2, CO up to 4,000 ppm)
Product code: 0564-3002-70
The testo 300 Domestic Kit allows you to measure oxygen and carbon monoxide up to 4,000 ppm. -The kit includes everything you need to measure flue gas; includes the main unit, oxygen and carbon monoxide sensors, basic flue gas probe (180 mm, Ø 6 mm), spare dirt filters, EasyHeat software, and instrument case. -The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. Measures flue gas, draught, pressure, ambient CO and differential temperature. -Comes with the compact basic flue gas probe, 180 mm with integrated thermocouple probe for temperature measurements up to 500 °C.
$2,159.60
AUD + GST
$2,375.56
AUD Inc. GST
TM-801 Carbon Monoxide Meter
Product code: IC-TM-801
Carbon monoxide meter up to 1000 ppm. With dual display for carbon monoxide and temperature. Calibration points for 100 ppm or 500 ppm.
$299.30
AUD + GST
$329.23
AUD Inc. GST
Testo Electronic Flue Gas Spillage Detector with Probe - 0632-3170
Product code: 0632-3170
The testo 317-1 flue gas spillage detector reliably detects escaping heating gases
$209.50
AUD + GST
$230.45
AUD Inc. GST
Testo CO Monitor with Case & Belt Clip - 0632-3173
Product code: 0632-3173
The testo 317-3 CO monitor detects the presence of carbon monoxide in the surrounding area and warns the user
$339.00
AUD + GST
$372.90
AUD Inc. GST
testo 324 leakage measuring instrument - Pressure/gas leak detector
Product code: IC-0632-3240
Pressure and leakage measuring instrument DVGW-approved for all tests at gas and water pipes as load and tightness test and serviceability test.
$2,859.10
AUD + GST
$3,145.01
AUD Inc. GST
Testo 315-3 CO and CO2 Detector without Bluetooth - IC-0632-3153
Product code: IC-0632-3153
The testo 315-3 is a professional co and co2 detector. The testo 315-3 has a highly accurate electrochemical sensor for CO measurement and a shock-resistant infrared CO2 sensor. It is ideally protected from external influences by its robust design and the optionally available TopSafe. And that's not all. During the measurement, optical and audible alarms let you know immediately if the adjustable limit values have been exceeded.
$1,719.30
AUD + GST
$1,891.23
AUD Inc. GST
Detector of refrigerant gases and hydrogen - IC-DF110
Product code: IC-DF110
The DF 110 is used to detect all the HCFC and HFC?s and trace gases such as hydrogen and nitrogen. With a heated diode sensor and three sensitivity modes.
$649.60
AUD + GST
$714.56
AUD Inc. GST