MT1005 TRMS Industrial Multimeter with TFT & Bluetooth, CATIV, 600V
Product code: MT1005
Heavy duty True RMS Industrial Digital Multimeter with TFT color LCD display, provides fast A/D converting sampling time, high accuracy, built-in data logging and Trend Capture features. -AC, ACV+DCV True-RMS measurements. -With Bluetooth for faster data transfer. -Logging function with Trend Capture for easy review of logged data.
$569.80
AUD + GST
$626.78
AUD Inc. GST
MT565 True RMS Multimeter and Insulation Continuity Tester
Product code: MT565
The MT565 combines a digital insulation tester with an insulation tester in one handy unit. -Measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle. - 5 insulation test ranges (50V, 100V, 250V, 500V, 1000V). -Built with IP65 waterproof housing.
$849.40
AUD + GST
$934.34
AUD Inc. GST
True RMS Thermal Multimeter
Product code: MT2005
Professional True RMS industrial digital multimeter with thermal and infrared imager. -With 80 x 80 Thermal Imager, and TFT color LCD display. -Infrared Thermal Imager offers you non invasive measurements of potential hot spots. -With Bluetooth and IP65 protection.
$1,719.40
AUD + GST
$1,891.34
AUD Inc. GST
Ultraprobe 100 Premium Stethoscope/Scanner Kit
Product code: UP100SC-P
The UP100SC-P is an entry-level ultrasonic leak detector for airborne ultrasound such as pressure, vacuum and electrical emissions. -Handy device that is quick and easy to learn for point & shoot troubleshooting. -Includes rubber focusing cone and stethoscope module. -Features an 8-position sensitivity dial with decibel indications. -Premium kit includes d eluxe noise attenuating headphones.
$2,779.00
AUD + GST
$3,056.90
AUD Inc. GST
Ultraprobe 2000 Scanner Kit
Product code: UP2000S
The UP2000S is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis specially for monitoring low volume airborne ultrasound such as pressure, vacuum and electrical emissions. -Handy device that is quick and simple to learn for situations that require point-and-shoot trouble shooting and for energy conservation. -Includes rubber focusing cone for narrowing reception band of scanning module and for blocking out ambient ultrasound. -Adjustable Frequency from 20 kHz to 100 kHz. -Accurate analogue meter with meter mode function
$7,308.00
AUD + GST
$8,038.80
AUD Inc. GST
Ultraprobe 9000 Scanner Kit
Product code: UP9000S
The UP9000S is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis specially for monitoring low volume internal ultrasound such as in bearings, steam traps and valves. -Includes rubber focusing cone for narrowing reception band of scanning module and for blocking out ambient ultrasound. -Inspect electrical systems for faults, analyze on the spot & report. -Simple to use and can be learned in 15 minutes allowing you to move you through inspections quickly and easily.
$9,050.00
AUD + GST
$9,955.00
AUD Inc. GST
Ultraprobe 9000 (Long Range)
Product code: UP9000LRM
The UP9000LRM is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis with long measurement range. -Includes accessories and configurations for longer measurement range as compared to the UP9000KT. -Inspect electrical systems for faults, analyze on the spot & report. -Simple to use and can be learned in 15 minutes allowing you to move you through inspections quickly and easily.
$11,314.00
AUD + GST
$12,445.40
AUD Inc. GST
Ultraprobe 9000 ATEX
Product code: UP9000ATEX
The UP9000ATEX is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis. It is an upgraded version of the Ultraprobe 9,000 and is now certified for the mining industry and for monitoring specific gasses such as methane, propane and ethylene. -Inspect electrical systems for faults, analyze on the spot & report. -Simple to use and can be learned in 15 minutes allowing you to move you through inspections quickly and easily. -With dust proofing and certified safe for use with methane, propane and ethylene.
$13,927.00
AUD + GST
$15,319.70
AUD Inc. GST
Ultraprobe 9000 Complete Kit
Product code: UP9000KT
The Ultraprobe 9,000 is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis. -Inspect electrical systems for faults, analyze on the spot & report. -Simple to use and can be learned in 15 minutes allowing you to move you through inspections quickly and easily.
$10,443.00
AUD + GST
$11,487.30
AUD Inc. GST
Ultraprobe 10,000 Kit
Product code: UP10000SD
The Ultraprobe 10,000 is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis. -Inspect electrical systems for faults, analyze on the spot & report. - Sound Recording with a push of a button. R ecord a sound sample directly into the instrument and link it to one of 400 record files stored in the Ultraprobe. -Find your leaks & report cost per leak with DMS reporting
Ultraprobe 15,000 Kit
Product code: UP15000LRM
The Ultraprobe 15,000 is an ultrasonic monitoring instrument for efficient ultrasound data collection, inspection & analysis. -An efficient instrument for inspecting electrical systems for faults, find faulty steam traps and detect leaks. -Multiple data screens for dB / temperature / spectrum analysis. -Determine and store the RPM of a rotating asset with the fully integrated strobe light.
Ultraprobe 15,000 Plus IS Kit (9K)
Product code: UP15000ATEX-COMBO(9K)
An inspection tool package that includes the Ultraprobe 15,000 and the Ultraprobe 9000ATEX. Monitor general work areas using the Ultraprobe 15,000 and the use the Ultraprobe 9000ATEX for hazardous areas. -The Ultraprobe 15,000 for in-field diagnostics, performs on-board spectral analysis, record the sounds of test equipment, measure and record temperature, take photographs with flash, store and manage data. -The Ultraprobe 9000ATEX is sensitive enough to detect 0.127 mm diameter leak at 0.34 bar at a distance of 15 meters.
AD-3253 Ultrasonic Thickness Gauge
Product code: AD-3253
The AD-3253 is an ultrasonic thickness gauge ideal for testing where access to both sides of the material is not available. Surface contact is all that is required. -Low cost, light weight and the easy to operate. -Thickness range of 2 to 200 mm
pHionics STs ORP (Redox) Sensor with 4-20mA output
Product code: STS2100S-025
The pHionics STs Series™ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring. -Measurement range: -1000 to +1000 mV oxidation-reduction potential (ORP). -Has a narrow diameter (1.9 cm), appropriate for groundwater monitoring applications.
$1,989.20
AUD + GST
$2,188.12
AUD Inc. GST
pHionics STs DO (Dissolved Oxygen) Sensor with 4-20mA
Product code: STS3020S-025
The pHionics STs Series Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required. -0 to 20 mg/L or 0 to 200% saturation depending on scaling with datalogger or RTU. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge).
$2,599.20
AUD + GST
$2,859.12
AUD Inc. GST
pHionics STs pH Sensor with 4 to 20mA output
Product code: STS1014S-025
The pHionics STs Series pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring. -19mm diameter probe while a durable, chemical-resistant housing. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge). -Suitable for groundwater monitoring, wastewater treatment, aquaculture, pollution control, and many others.
$1,889.10
AUD + GST
$2,078.01
AUD Inc. GST
USB LogTag with Display and Sensor (140mm tip, 1.5m cable)
Product code: UTRED-16F-ST100T-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 140 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (30mm tip, 3m cable)
Product code: UTRED-16F-ST100S-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 30 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (30mm tip, 1.5m cable)
Product code: UTRED-16F-ST100S-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 30 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (90mm tip, 3m cable)
Product code: UTRED-16F-ST100L-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 65 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (90mm tip, 1.5m cable)
Product code: UTRED-16F-ST100L-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 90 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (65mm tip, 3m cable)
Product code: UTRED-16F-ST100K-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 65 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (65mm tip, 1.5m cable)
Product code: UTRED-16F-ST100K-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 65 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (40mm tip, 3m cable)
Product code: UTRED-16F-ST100J-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 40 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (40mm tip, 1.5m cable)
Product code: UTRED-16F-ST100J-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 40 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Handled Sensor (105mm tip, 3m cable)
Product code: UTRED-16F-ST100H-3
Temperature data logger with LCD display and visual alerts with handled sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 105 mm tip, handled sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Handled Sensor (105mm tip, 1.5m cable)
Product code: UTRED-16F-ST100H-1.5
Temperature data logger with LCD display and visual alerts with handled sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 105 mm tip, handled sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Bare Sensor
Product code: UTRED-16F-ST100B-3
Temperature data logger with LCD display and visual alerts with untipped, bare sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes an untipped bare sensor with 3 meter cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display
Product code: UTRED-16F
Temperature data logger with LCD display and visual alerts. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Requires a temperature probe to use (sold separately).
$163.64
AUD + GST
$180.00
AUD Inc. GST
Ultraprobe 201 Grease Caddy
Product code: UP201
The Ultraprobe 201 Grease Caddy is uniquely designed to allow an operator to simultaneously lubricate and monitor ultrasound levels to prevent over-lubrication. -Listen to the sound of bearings as you apply the lubricant allowing you stop when needed.
$3,476.00
AUD + GST
$3,823.60
AUD Inc. GST