Beaker 500ml Polypropylene - IC-91055055
Product code: IC-91055055
Moulded in polypropylene, these beakers have excellent clarity, good chemical resistance and are autoclavable. The beakers have raised graduations and tapered spout for easy pouring.
$8.50
AUD + GST
$9.35
AUD Inc. GST
1 in stock
UbiBot Industrial-grade WiFi Temperature, Humidity and Light Monitor (5V and 12V)
Product code: IC-GS1-A1RS-S
The UbiBot GS1-A1RS-S is an industrial-grade cloud-based environmental monitoring data logger with internal temperature, humidity and ambient light sensors. It is also compatible with all 5V and 12V RS485 probes. Automatically syncs all data to the UbiBot IoT cloud platform that allows users to access all measured data remotely, anywhere, using the UbiBot app or through the web. Supports multiple RS485 5V and 12V external probes (only one of each type can be connected at the same time). Also supports different power sources depending on the requirements (internal lithium battery, Type-C 5V (USB cable provided), or DC 12V (sold separately).
$329.20
AUD + GST
$362.12
AUD Inc. GST
UbiBot Industrial-grade WiFi Temperature, Humidity and Light Monitor (1DS) - IC-GS1-A1RS(1DS)
Product code: IC-GS1-A1RS(1DS)
The UbiBot GS1-A1RS(1DS) is an industrial-grade cloud-based environmental monitoring data logger that has internal temperature, humidity and ambient light sensors. It is also compatible with external temperature probes in applications in extreme environments such as in extreme low temperatures or in wet conditions. Automatically syncs all data to the UbiBot IoT cloud platform that allows users to access all measured data remotely, anywhere, using the UbiBot app or through the web. Compatible with the DS18B20-Audio Temperature Probe. Also supports different power sources depending on the requirements (internal lithium battery, Type-C 5V (USB cable provided), or DC 12V (sold separately).
$309.70
AUD + GST
$340.67
AUD Inc. GST
LoggerFlex BLOCK Puls Data/Alarm System - IC-BLOCKPuls
Product code: BLOCK-PULSE
This is a pulse counter that can receive active and passive signals from external sources. It is a good way to digitize old meter counters, including electricity, heating, gas and much more when combined with Loggerflex pulse loggers.
$399.30
AUD + GST
$439.23
AUD Inc. GST
2 in stock
Defelsko PosiTector 200 D1 Standard Coating Thickness Gauge
Product code: 200D1-G
The Defelsko PosiTector 200 D1 Standard Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 7600 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$4,329.00
AUD + GST
$4,761.90
AUD Inc. GST
Defelsko PosiTector 200 C3 Advanced Coating Thickness Gauge
Product code: 200C3-G
The Defelsko PosiTector 200 C3 Advanced Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. It has Bluetooth and WiFi connectivity and storage for 250,000 readings. Advanced PosiTector meters have Bluetooth and Wifi connectivity and can measure up to three layers with graphics. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200C type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 3800 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$4,759.10
AUD + GST
$5,235.01
AUD Inc. GST
Defelsko PosiTector 200 C1 Standard Coating Thickness Gauge
Product code: 200C1-G
The Defelsko PosiTector 200 C1 Standard Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200C type C probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 3800 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$3,979.50
AUD + GST
$4,377.45
AUD Inc. GST
Defelsko PosiTector 200 B3 Advanced Coating Thickness Gauge
Product code: 200B3-G
The Defelsko PosiTector 200 B3 Advanced Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. It has Bluetooth and WiFi connectivity and storage for 250,000 readings. Advanced PosiTector meters have Bluetooth and Wifi connectivity and can measure up to three layers with graphics. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 13 - 1000 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$4,409.70
AUD + GST
$4,850.67
AUD Inc. GST
PosiTest G Magnetic Coating Thickness Gauge (0-2000um) - POSITESTG
Product code: POSITESTG
Easy to use magnetic pull-off thickness gauge measuring electroplating, thin paint films, phosphating on steel. Permanently calibrated. DeFelsko PosiTest G measurement range: 0 to 200um. Complies with the requirements of Australian Standard AS3894.3-2002.
$549.20
AUD + GST
$604.12
AUD Inc. GST
PosiTest F Magnetic Coating Thickness Gauge (0-2000um) - POSITESTF
Product code: POSITESTF
Easy to use magnetic pull-off, thickness gauge to measure hot dip galvanizing, hard chrome metalizing, paint, enamel and plastic coatings on steel. Permanently calibrated. DeFelsko PosiTest F measurement range: 0 to 2000um. Complies with the requirements of Australian Standard AS3894.3-2002.
$549.20
AUD + GST
$604.12
AUD Inc. GST
UbiBot Smart Leak Detector LD1 (Wifi and Cellular) - IC-LD1-AL4G2L
Product code: IC-LD1-AL4G2L
The UbiBot LD1 is an IoT leak detector that monitors and identifies liquid leaks. This model can has Wifi and cellular (2G/3G/4G) connectivity. Built with a sensisitive, durable and fire-resistant water detection cable. Triggers an audible and visual alarm immediately and display the location of the leakage on the LCD screen in real time. Has a disconnect alarm notification in the case of cable failure.
$399.40
AUD + GST
$439.34
AUD Inc. GST
UbiBot Smart Leak Detector LD1 (WiFi and Ethernet) - IC-LD1-AETH2L
Product code: IC-LD1-AETH2L
The UbiBot LD1 is an IoT leak detector that monitors and identifies liquid leaks. This model has both Wifi and Ethernet connectivity. Built with a sensisitive, durable and fire-resistant water detection cable. Triggers an audible and visual alarm immediately and display the location of the leakage on the LCD screen in real time. Has a disconnect alarm notification in the case of cable failure.
$319.20
AUD + GST
$351.12
AUD Inc. GST
UbiBot Smart Leak Detector LD1 - IC-LD1-A2L
Product code: IC-LD1-A2L
The UbiBot LD1 is an IoT leak detector that monitors and identifies liquid leaks. Built with a sensitive, durable and fire-resistant water detection cable. Triggers an audible and visual alarm immediately and display the location of the leakage on the LCD screen in real time. Has a disconnect alarm notification in the case of cable failure.
$289.70
AUD + GST
$318.67
AUD Inc. GST
PoE Pro Tester - IC-R158006
Product code: IC-R158006
The PoE Tester is a multifunction tool that identifies the Class of the PoE source, injector type and power available to a PoE device regardless of cable length, cable quality or other factors. Identifies the PoE source, class, IEEE standard and power available during installation, troubleshooting or maintenance. Test results are stored in real-time on the free AnyWARE mobile app and are seamlessly uploaded to AnyWARE Cloud where professional PDF reports are generated. Also detects cabling issues and can troubleshoot devices up to 90W.
$1,369.20
AUD + GST
$1,506.12
AUD Inc. GST
NAVITEK NT PLUS - IC-R151005
Product code: IC-R151005
The new NaviTEK NT Plus is a network tester for troubleshooting and maintenance of active and passive copper networks with touch screen. Has an autotest button that performs a suite of network tests (Ping, DNS, Gateway, Traceroute). Network Probe provides detailed port and network information of each device. Internal memory for 5000 test reports.
$2,259.00
AUD + GST
$2,484.90
AUD Inc. GST
NAVITEK NT Pro Bundle - IC-NTEK-KIT
Product code: IC-NTEK-KIT
This bundle includes the NaviTEK NT Pro for troubleshooting and maintenance of active and passive copper and fiber networks. It includes active remotes and amplifier probe. The NaviTEK NT Pro performs tests for copper cablings and networks with a fiber optic cable interface. Provides PoE/PoE+ detection with load test. Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan.
$2,999.40
AUD + GST
$3,299.34
AUD Inc. GST
R164061 FiberTEK III LC Adapter Kit - IC-R164061
Product code: IC-R164061
The multimode R164061 accessory kits allow one-jumper calibration when testing cabling systems with LC connectors. The kits utilize a precision LC adapter for the receive (Rx) port of each FiberTEK III module and a SC-LC test cord for the transmit (Tx) port. One-jumper calibration recommended by most standards for field testing. Procedure is the same for MM and SM testing.
$12,569.90
AUD + GST
$13,826.89
AUD Inc. GST
FiberTEK IV-MM LED and SM Laser Kit - IC-R164010
Product code: IC-R164010
FiberTEK IV combination MM/SM kit with LED MM sources and laser SM sources. FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing. Flashes red to warn of light from other sources, green when linked to FiberTEK IV. Red laser light source to visually pinpoint faults and locate fiber ports. Supports all common connector types. Compatible with all LanTEK IV models.
$18,299.50
AUD + GST
$20,129.45
AUD Inc. GST
LanTEK IV-S 3000MHz Cable Certifier (With PL/CL Adapters) - IC-R163009
Product code: IC-R163009
The LanTEK IV-S R163009 is a 3000MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$18,299.30
AUD + GST
$20,129.23
AUD Inc. GST
LanTEK IV-S 500MHz Cable Certifier (With PL/CL Adapters) - IC-R163008
Product code: IC-R163008
The LanTEK IV-S R163008 is a 500MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$16,559.80
AUD + GST
$18,215.78
AUD Inc. GST
EL-WEM+ WiFi CO2 and Indoor Air Quality Monitor - IC-EL-WEM-PLUS
Product code: IC-EL-WEM-PLUS
The EL-WEM+ CO2 and Indoor Air Quality (IAQ) monitors indoor CO2 levels, temperature, humidity, VOCs, pressure, PM1, PM2.5 and PM10 to help you monitor indoor air quality. Measures all parameters in real-time, rating them according to five levels (Excellent to Inadequate). Visual and audible alarms and SMS alerts, are triggered when any of the measured parameters fall to the two lowest levels. All measured data are uploaded into the Easylog Cloud for convenient access to historical data.
$509.30
AUD + GST
$560.23
AUD Inc. GST
pH Electrode with Clogging Prevention System (CPS) and BNC Connector - IC-HI1048B
Product code: IC-HI1048B
The HI1048B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. The CPS technology makes this probe ideal for wine, juice or other samples with solids as they contain substances that can clog other types of probes. Has a spherical tip that provides a larger area for contact for faster and more stable readings. Refillable Electrode (3.5M KCl).
$449.90
AUD + GST
$494.89
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC and Pin Connectors - IC-HI1043P
Product code: IC-HI1043P
The HI1043P is a glass body, refillable, double junction pH electrode with a BNC and pin connector. The pin connector is used to enable the CAL Check function of the HI2221, HI2222, and HI2223 benchtop meters. Has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. Designed specifically for hydrocarbons, paints, solvents, high conductivity samples, strong acids, bases, and for applications that require measuring samples in high temperatures. Its a refillable probe using HI7082 3.5M KCl.
$439.00
AUD + GST
$482.90
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC Connector - IC-HI1043B
Product code: IC-HI1043B
The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
$399.92
AUD + GST
$439.91
AUD Inc. GST
Digital pH/Temp electrode for HI98199 - IC-HI829113
Product code: IC-HI829113
The HI829113 is a digital pH/temperature probe is made for use with the HI98199 portable multiparameter pH, EC, and DO meter. Has a flat tip electrode housed in a titanium metal body. An integrated temperature sensor is located in the tip of the electrode for fast and accurate temperature compensated measurements.
$639.00
AUD + GST
$702.90
AUD Inc. GST
Digital Dissolved Oxygen Probe for HI98199 - IC-HI764103
Product code: IC-HI764103
The HI764103 is a digital dissolved oxygen probe with a built-in temperature sensor for the Hanna HI98199 portable meter. Contains a built-in microchip that stores sensor type, serial number, and calibration information that is automatically detected by the HI98199. Features a silver cathode with a zinc anode, an integrated temperature sensor, and easily replaceable HDPE membrane caps. No warm-up time.
$659.50
AUD + GST
$725.45
AUD Inc. GST
WiFi Digital Weather Station - IC-XC0450
Product code: IC-XC0450
Wireless digital weather station with 4 day forecasting and WiFi. See updated local weather for the day and predicted weather forecast for the next three days. Includes a 7-in-1 outdoor, solar-powered sensor for measuring rainfall, temperature, wind direction and wind speed, humidity, UV and light intensity. View recorded data and weather forecasts through a colored digital display. Also connects and send weather data to ProWeatherLive, Weather Underground, and Weathercloud weather platforms.
$589.10
AUD + GST
$648.01
AUD Inc. GST
8 in stock
Digital DO probe for edge - IC-HI764080
Product code: IC-HI764080
The HI 764080 is a digital dissolved oxygen electrode with built-in temperature sensor. This ultra-thin, Clark-type polarographic electrode is designed for measuring DO in aqueous solutions and contains a built-in microchip that stores sensor type, serial number, and calibration information. Has a platinum cathode with a silver/silver chloride anode, an integrated temperature sensor, and easily replaceable PTFE membrane caps. With integrated temperature sensor for temperature compensated applications. Designed for use with Hanna’s edge pH/EC/DO meter.
$789.40
AUD + GST
$868.34
AUD Inc. GST
Digital EC probe for Edge - IC-HI763100
Product code: IC-HI763100
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. The HI 763100 is a potentiometric probe with platinum sensors making it suitable for measuring high or low conductivity ranges. Has a builtin microchip that stores calibration data. For Hanna Edge pH/EC/DO meters.
$789.20
AUD + GST
$868.12
AUD Inc. GST
Digital PEI Body, Gel filled, ORP Electrode - IC-HI36200
Product code: IC-HI36200
The HI36200 is a PEI body, single junction ORP electrode with a built-in temperature sensor. This electrode has a single ceramic junction in the outer reference cell and the ORP sensing pin is made with platinum. Features a built-in microchip that stores sensor type, serial number, and calibration information. Features a rugged PEI (polyetherimide) body that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications. With a 3.5 mm connector.
$378.28
AUD + GST
$416.11
AUD Inc. GST