Data Loggers
TidbiT Boot Black - IC-BOOT-TIDBIT-BK
Product code: IC-BOOT-TIDBIT-BK
The optional TidbiT thermoplastic elastomer boot provides cushioning for use in harsh conditions offered in black to minimize underwater visibility. Five boots included.
$69.20
AUD + GST
$76.12
AUD Inc. GST
testo 184 H1 - Air humidity and temperature data logger for transport monitoring
Product code: IC-0572-1845
With the testo 184 H1 data logger for humidity and temperature, you can now monitor the transport of sensitive products, such as food, pharmaceuticals, electronic items or artwork, both safely and conveniently. A start and stop button means the humidity data logger guarantees really easy operation for data recording. At the destination, a glance at the display or the LEDs tells you whether the configured limit values have been adhered to during transport.
$259.30
AUD + GST
$285.23
AUD Inc. GST
testo 184 G1 - Vibration, humidity and temperature data logger for transport monitoring
Product code: IC-0572-1846
With the data logger testo 184 G1 for shock, humidity and temperature, you can now monitor the transport of sensitive products such as electronics, art, pharmaceuticals or foods safely and conveniently. Thanks to a start and stop button, the data logger guarantees easiest data recording operation. At their destination, a glance at the display or the LEDs tells you whether the configured limit values have been adhered to during transport.
$469.60
AUD + GST
$516.56
AUD Inc. GST
Temprecord Temperature Data Logger - Polycarbonate holder
Product code: 952183
Polycarbonate holder for Multitrip Data Loggers.
$21.00
AUD + GST
$23.10
AUD Inc. GST
19 in stock
Temprecord SR2 Reader Interface - USB Port connection
Product code: IC-953188USB
SR2 Reader Interface for PC (USB Port Connection) for Temprecord Data loggers without an USB.
$89.30
AUD + GST
$98.23
AUD Inc. GST
2 in stock
Temperature and humidity probe - IC-0572 2156
Product code: IC-0572-2156
Measure temperature and relative humidity in display cabinets accurately and discreetly (with the corresponding data logger): with the digital temperature and humidity probe with plug-in cable.
$249.50
AUD + GST
$274.45
AUD Inc. GST
Split Core Hobo AC Current Sensor, 0-600A - CTV-E
Product code: CTV-E
0 - 600 Amp split-core AC current sensor
$479.60
AUD + GST
$527.56
AUD Inc. GST
Smart Sensor Consolidator Box - IC-S-ADAPT-6
Product code: IC-S-ADAPT-6
Allows users to connect up to six Smart Sensors in a water-resistant enclosure to one sensor extension cable back to an RX3000, U30, H22, or H21 logger.
$399.50
AUD + GST
$439.45
AUD Inc. GST
Sodium Sulfite Solution - IC-U26-CAL-SOL
Product code: IC-U26-CAL-SOL
Sodium Sulfite solution (500 mL) is used for calibrating the HOBO Dissolved Oxygen Logger at 0% saturation, which is optional.
$109.60
AUD + GST
$120.56
AUD Inc. GST
Siteview Software - IC-SSV-1
Product code: IC-SSV-1
SiteView is a PC based application which works with Site-Log Series data loggers for downloading, configuration and data analysing and plotting. Its user-friendly graphic interface plus powerful functionalities fit both novice and advanced users.
$179.10
AUD + GST
$197.01
AUD Inc. GST
Senonics External Humidity and Temperature Sensor - IC-Ext Sen 1.0TH
Product code: IC-Ext-Sen-1.0TH
The Ext Sen 1.0TH is a fully digital sensor that can measure temperature + humidity [TH]. Each sensor stores its own adjustment and calibration data so that any cable can be used with any logger. The probe end of the cable is made from deep drawn seamless stainless steel for a strong, watertight sensor.
$199.00
AUD + GST
$218.90
AUD Inc. GST
Windows software for Star-Oddi Data Loggers - SeaStar
Product code: SeaStar
SeaStar is the main graphical Windows supporting software for Star-Oddi loggers for Aquatic and Fisheries Research and Other Industries. It offers graphical and tabular analysis of the recordings.
$595.00
AUD + GST
$654.50
AUD Inc. GST
Robust Plastic Enclosure for tempmate.-B Data Loggers
Product code: IC-SL50-ACC03
Robust Plastic Enclosure for tempmate.-B Data Loggers
$319.30
AUD + GST
$351.23
AUD Inc. GST
RB12 Relay Board
Product code: IC-RB12
Provides 12 industry standard relay module sockets to a U3, U6, UE9, T4, or T7. Commonly used to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules.
$336.00
AUD + GST
$369.60
AUD Inc. GST
PS12DC Power Switching Board
Product code: IC-PS12DC
Controlled through 12 digital outputs, the PS12DC can switch power sources ranging from 5 to 28V DC. Attach the PS12DC to the DB15 connector presented on all compatible devices, and toggle the states of the EIO and CIO digital output lines to turn the switches on/off.
$219.00
AUD + GST
$240.90
AUD Inc. GST
Pipe wrap probe for pipe diameter 5 to 65 mm - IC-0602-4592
Product code: IC-0602-4592
Pipe wrap probe for pipe diameter 5 to 65 mm with measuring range of -60 to +130 degrees Celsius.
$309.00
AUD + GST
$339.90
AUD Inc. GST
Pack of 5 waterproof bags for EasyLog Data Loggers - IC-EL-CC-BAG
Product code: IC-EL-CC-BAG
Pack of 5 waterproof bags for use when reusing all EL-CC-1 and EL-PDF-1 data loggers.
$209.30
AUD + GST
$230.23
AUD Inc. GST
Pendant Replacement Parts Kit - IC-UA-PARTSKIT
Product code: IC-UA-PARTSKIT
Pendant replacement parts kit includes pendant case, end cap, O-ring, two screws, and silicone-based O-ring grease.
$59.90
AUD + GST
$65.89
AUD Inc. GST
NDVI Light Sensor Bracket - IC-M-NDVI
Product code: IC-M-NDVI
This bracket is used to mount two PAR sensors (Part# S-LIA-M003) and two solar radiation sensors (Part# S-LIB-M003) on the Light Sensor Bracket (Part# M-LBB) for making the measurements needed to calculate the Normalized Difference Vegetation Index (NDVI).
$89.10
AUD + GST
$98.01
AUD Inc. GST
NTC Immersion/Penetration Probe - IC-0610-1725
Product code: IC-0610-1725
Testo NTC Immersion/Penetration Temperature Probe with 19.6' Cable, 3mm x 40mm Tip, and measuring range of -35 to +80 degrees Celsius.
$169.20
AUD + GST
$186.12
AUD Inc. GST
Nanoflex Current Sensor - IC-4AAZARP
Product code: IC-4AAZARP
NanoFlex is a current sensor with an active part (Rogowski coil) characterized by a high flexibility that allows it to be installed in the most demanding positions.
Mux80 AIN Expansion Board
Product code: IC-Mux80
Analog input expansion board that adds 80 analog input channels. It can be connected to a U6, UE9, or T7 directly through the DB37 connector.
$339.00
AUD + GST
$372.90
AUD Inc. GST
Monnit MOWI Wi-Fi Water Detect Sensor - IC-MNS-2-WF-WS-WD-L03
Product code: IC-MNS-2-WF-WS-WD-L03
The Monnit Wi-Fi water detection sensor alerts you of potential property damage that results from flooding or leaks. Place this sensor anywhere flooding or faulty plumbing could cause a problem.
$408.00
AUD + GST
$448.80
AUD Inc. GST
Monnit MOWI Wi-Fi Temperature Sensor (Internal)
Product code: IC-MNS-2-WF-TS-ST-L-Internal
Monnit MOWI Wi-Fi Sensors monitor temperatures and send the data wirelessly via your Wi-Fi to the iMonnit Cloud Database where you can view Graphs and data on line and receive alerts should any parameter breach.
$408.00
AUD + GST
$448.80
AUD Inc. GST
Monnit MOWI Wi-Fi Programming Cable
Product code: IC-MNA-N-UC-WF
The Monnit Wi-Fi programming cable allows you to connect your MoWi sensors to your PC via USB connection for initial configuration and Wi-Fi security setup via the MoWi Sensor Setup Utility.
$36.00
AUD + GST
$39.60
AUD Inc. GST
Monnit MOWI Wi-Fi Infrared Motion Sensor - IC-MNS-2-WF-MS-IR
Product code: IC-MNS-2-WF-MS-IR
Monnit wireless motion sensors use an infrared sensing technology to accurately detect movements made by people/animals within 16.4 ft (5 m) range. User customization allows you to receive notifications by SMS text or email the instant motion is detected.
$630.00
AUD + GST
$693.00
AUD Inc. GST
Monnit MOWI Wi-Fi Dry Contact Sensor - IC-MNS-2-WF-DC-CF-L01
Product code: IC-MNS-2-WF-DC-CF-L01
Monnit wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered.
$433.00
AUD + GST
$476.30
AUD Inc. GST
Monnit MOWI Wi-Fi Button Press Sensor - IC-MNS-2-WF-PB-ST
Product code: IC-MNS-2-WF-PB-ST
The touch activated wireless button sensor allows a notification signal to be sent when immediate contact is important. This button includes an LED response indicator to confirm that the system has received the alert.
$433.00
AUD + GST
$476.30
AUD Inc. GST
Monnit ALTA Wireless Coin Cell Temperature Sensors - IC- MNS2-4-W1-TS-ST
Product code: IC-MNS2-4-W1-TS-ST
ALTA wireless temperature sensors use a thermistor to accurately measure temperatures. These sensors are perfect for monitoring ambient temperatures around the sensors physical location.
$211.00
AUD + GST
$232.10
AUD Inc. GST