Data Loggers
DB9 Mini Gender Changers (Female + Male, CAN Bus)
Product code: Gender-Changers
Convert a DB9 female port to a male port and vice versa. Allows you to connect your CANedge/CLX000 CAN logger to another male DB9 connector. In this case you'd need a DB9 F/F gender changer.
$89.80
AUD + GST
$98.78
AUD Inc. GST
DB9-DB9 Extension Cable (3M, CAN Bus)
Product code: DB9-DB9-3M
With this 3 meter low cost DB9 female to DB9 male connector cable, you'll be able to easily extend your CAN bus system or connect your CAN logger to a difficult-to-reach location. The cables are non-terminated, letting you combine multiple together.
$89.60
AUD + GST
$98.56
AUD Inc. GST
DC to Cigarette Outlet Adapter
Product code: Cigarette-DC
With this DC male connector and our DB9-to-DB9/DC adaptor, you can easily power e.g. your CANedge/CLX000 CAN logger via your car's cigarette lighter (in case your CAN bus does not provide a direct power supply). It can also be used if you want to log data via a CANCrocodile, powering your installation via your cigarette outlet.
$51.00
AUD + GST
$56.10
AUD Inc. GST
DB9 to DB9/DC Power Splitter
Product code: DB9-DB9-DC
With the DB9-to-DB9/DC power splitter, you'll be able to power e.g. your CAN logger via a power outlet, battery or e.g. cigarette receptacle. The DC female connector is a standard 5.5 mm (ID, inner diameter) x 2.1 mm (CPD, center pin diameter). The adaptor is great for test setups, machine logging or vehicles where no power is provided by the DB9 connector (or you prefer not to use the CAN bus power supply).
$89.60
AUD + GST
$98.56
AUD Inc. GST
CANEDGE Accessory - WiFi Rooftop Antenna (SMA, 3M Cable)
Product code: CSS-WiFI
WiFi Rooftop Antenna extends the range of your CANEdge data logger. The WiFi SMA antenna of the CANedge2 can be easily disconnected - letting you e.g. add this rooftop SMA antenna.
$51.00
AUD + GST
$56.10
AUD Inc. GST
CAT-to-DB9 Adapter Cable (Deutsch 9-Pin, Caterpillar)
Product code: DB9-CAT
This 1.5 meter CAT-to-DB9 deutsch 9-pin adapter fits most Caterpillar heavy duty vehicles and lets you easily connect your CANedge/CLX000 CAN logger to start recording J1939 data.
$89.10
AUD + GST
$98.01
AUD Inc. GST
3 in stock
CANmod.input: 8 x Analog/Digital/Pulse to CAN Bus Converter
Product code: CANmod.input
This sensor-to-CAN module produces analog, digital & pulse measurements from 8 input channels - and outputs the data via CAN bus. The module is 100% standalone, no PC required.
$539.60
AUD + GST
$593.56
AUD Inc. GST
![CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]](/media/cache/attachment/filter/product_large/ca048c1dad6aff04975c90c926869a37/127622/61ee13ef7cbe9625321350.png.webp)
CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]
Product code: CANmod.temp
This thermocouple-to-CAN module produces temperature data from 4 thermocouple sensors and outputs it via CAN bus. The module is 100% standalone - no PC required. -The module supports all thermocouple types (B, E, J, K, N, R, S, T) and can be daisy-chained for 8, 12, 16, ... channels.
$469.80
AUD + GST
$516.78
AUD Inc. GST
CANmod.gps: GPS-to-CAN with 3D Inertial Sensor and UDR
Product code: CANmod.gps
This standalone GPS-to-CAN module produces GNSS position and 3D inertial data (via a gyroscope & accelerometer) and outputs it via configurable CAN bus frames.
$369.80
AUD + GST
$406.78
AUD Inc. GST
Wall bracket for data loggers - Wall holder for testo 184
Product code: 0554-1841
Using the wall bracket, you can securely attach appropriate data loggers to goods during transport. This enables optimum monitoring of transport conditions. The wall bracket can easily be fixed using adhesive strips.
$31.00
AUD + GST
$34.10
AUD Inc. GST
ComSoft 21 CFR Part 11 Software
Product code: 0554-1705
The ComSoft 21 CFR Part 11 software means you get validatable software for programming and readout of Testo data loggers and for archiving data. It fulfils all the FDA's 21 CFR Part 11 requirements. -Intuitive and validatable software for the pharmaceutical industry. -Graphic and tabular display of all measurement parameters. -Effortless creation and management of reports. -Digital signature and audit trail for maximum security and safety.
$2,819.90
AUD + GST
$3,101.89
AUD Inc. GST
ComSoft Professional Software
Product code: 0554-1704
The ComSoft Professional software means you get software for programming and readout of Testo data loggers and for archiving data. It offers analysis and display possibilities over and above the basic functions. -Professional software for programming and readout of Testo data loggers and for archiving data. -Graphic and tabular display of all measurement parameters. -Effortless creation and management of reports. -Intuitive user interface for efficient work.
$639.00
AUD + GST
$702.90
AUD Inc. GST
Wall Bracket for Testo Data Loggers - 0554-1702
Product code: 0554-1702
Use the wall bracket to fix your data logger securely and firmly to walls. Made from ABS plastic; particularly secure thanks to the lock included in delivery.
$45.00
AUD + GST
$49.50
AUD Inc. GST
iMonnit Notification Credits 100 Pack
Product code: MNW-NC-100
iMonnit Notification Credits 100 Pack.
$32.00
AUD + GST
$35.20
AUD Inc. GST
Clever Logger Temperature Logger with External Probe
Product code: CLX-01-50
Bluetooth temperature logger with probe to measure temperature using the Clever Logger Gateway. With 5m cable.
$153.636
AUD + GST
$169.00
AUD Inc. GST
Deco-cover
Product code: IC-0554-2009
With the deco-cover for testo 160 THL, your exhibits are always the focus. Thanks to the customisable housing cover, you can integrate the WiFi data logger perfectly and discreetly into any exhibition.
$22.00
AUD + GST
$24.20
AUD Inc. GST
AC Power Adapter for the RX3000 & U30
Product code: AC-U30-EU
AC Power adaptor for HOBO RX3000 and U30 Data loggers.
$126.00
AUD + GST
$138.60
AUD Inc. GST
MX2500 Electrode Storage Cap
Product code: MX2500-STORE-CAP
The electrode storage cap is used to protect the pH electrode in the HOBO MX pH Logger, as well as to properly store the electrode in proper pH storage solution (MX2500-STORE-SOLN). The storage cap has the added benefit of being able to be used for field calibrations.
$47.00
AUD + GST
$51.70
AUD Inc. GST
MX2500 Anti-Biofouling Copper Guard
Product code: MX2500-GUARD
The Anti-Biofouling Copper Guard can be used in addition to the standard electrode guard for protection against biofouling during deployment. The anti-biofouling guard uses copper to reduce biofouling, while still allowing proper water flow to the sensor.
$79.10
AUD + GST
$87.01
AUD Inc. GST
MX2500 End Cap
Product code: MX2500-END-CAP
The replacement sensor end cap replaces the original sensor end cap that ships with the HOBO MX pH Logger.
$379.40
AUD + GST
$417.34
AUD Inc. GST
MX2500 Replacement Electrode
Product code: MX2500-ELECTRODE
The replacement pH electrode replaces the original pH electrode that ships with the HOBO MX2501 logger. The electrodes should be replaced after six months of use.
$379.80
AUD + GST
$417.78
AUD Inc. GST
![J1939 DBC File - PGN & SPN Data [2020-03]](/media/cache/attachment/filter/product_large/ca048c1dad6aff04975c90c926869a37/110241/60765f3993e11103510070.png.webp)
J1939 DBC File - PGN & SPN Data [2020-03]
Product code: J1939
The SAE J1939 DBC file contains decoding rules for scaling raw J1939 data to 'physical values' (km/h, %, degC, ...). -DBC is a CAN database format used in most CAN tools - incl. our CAN logger software. -This download includes a legal J1939 DBC file & license, based on the J1939 Digital Annex. We offer this in collaboration with SAE.
$859.40
AUD + GST
$945.34
AUD Inc. GST
Sacrificial sensor with bead thermistor, no connector, 3m cable
Product code: IC-T-TEC-T1-Sacrificial
Sacrificial sensor with bead thermistor, no connector, 3m cable Use with T-TEC Terminal connector.
$15.00
AUD + GST
$16.50
AUD Inc. GST
Thermochron Card Fob
Product code: CARD-FOB
Hold and label your Thermochrons with the credit-card sized plastic Card Fob. Different colors are available.
$5.50
AUD + GST
$6.05
AUD Inc. GST
11 in stock
Multifunction case small
Product code: IC-0516-1901
One case – numerous functions: This case not only enables secure storage and transport of the data loggers. It can also be used to program and read out 8 data loggers simultaneously.
$1,839.00
AUD + GST
$2,022.90
AUD Inc. GST
testo 191 professional software
Product code: IC-0554-1911
The testo 191 series HACCP data loggers mean you are ideally equipped for monitoring temperature and pressure in sterilization, pasteurization and freeze-drying processes. They can only be programmed and read out with the testo 191 professional software. The user-friendly software enables you to generate audit-relevant reports easily and intuitively with just the click of a mouse.
$1,819.00
AUD + GST
$2,000.90
AUD Inc. GST
Instrument to USB (computer) cable Center 300 series 30X ,31X, and 32X
Product code: USB300
USB cable to connect Center 300 series 30X ,31X, and 32X instrument to the computer.
$79.50
AUD + GST
$87.45
AUD Inc. GST
1.5 Meters Humidity Probe Extension Cable for Center 31, 318
Product code: TL-002
1.5 Meters Humidity Probe Extension Cable for Center 31, 318.
$34.00
AUD + GST
$37.40
AUD Inc. GST
Monnit ALTA Serial MODBUS Gateway - IC-MNG2-4-SG-SMG
Product code: IC-MNG2-4-SG-SMG
The ALTA Serial MODBUS Gateway acts as a data concentrator for ALTA wireless sensor networks. This device incorporates Monnit's ALTA Access Point Node (APN) and Serial RS-232C and RS-485 Interfacing hardware. Requires the Serial MODBUS Gateway - USB programmer and software as an added purchase.
$759.00
AUD + GST
$834.90
AUD Inc. GST
Monnit ALTA Industrial Wireless Water Detection Sensor - IC-MNS2-4-IN-WS-WD-L03
Product code: IC-MNS2-4-IN-WS-WD-L03
Monnit wireless water sensors alert you via SMS text and/or email when there is water detected, preventing potential property damage that results from flooding or leaks.
$508.00
AUD + GST
$558.80
AUD Inc. GST