Building Material & Timber Moisture Meters
Tramex Contact Temperature Probe - CTP
Product code: CTP
The CTP Contact Temperature Probe is a plug-in accessory probe used with the FeedBack Data Loggers to measure and log surface temperature over time. -Used alongside the Humidity sensor functions in the Data Logger, dew point circumstances can be easily identified.
$110.91
AUD + GST
$122.00
AUD Inc. GST
Short Narrow RH Probe - RHP-SNWB (for CMEX5)
Product code: RHP-SNWB
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$454.55
AUD + GST
$500.01
AUD Inc. GST
Short Narrow RH Probe - RHP-SNW (for CMEX2 and MRH3)
Product code: RHP-SNW
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$381.82
AUD + GST
$420.00
AUD Inc. GST
Narrow Ambient RH Probe - RHP-NWB (for CMEX5)
Product code: RHP-NWB
The Tramex 260mm Narrow Wand Relative Humidity Probe with bayonet connection for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$527.27
AUD + GST
$580.00
AUD Inc. GST
Narrow Ambient RH Probe - RHP-NW (for CMEX2 and MRH3)
Product code: RHP-NW
The Tramex 260mm Narrow Wand Relative Humidity Probe for CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$490.91
AUD + GST
$540.00
AUD Inc. GST
Short Ambient RH Probe - RHP-SWB (for CMEX5 and MEX5))
Product code: RHP-SWB
Short, ambient, relative humidity probe to evaluate moisture conditions within building structures using Hygro-i2® technology. -Measures relative humidity, temperature, dew point temperature and grains per pound humidity ratio. -Its speed and accuracy makes it appropriate for the evaluation of moisture conditions of wall and cavity structures as well as ambient air conditions within the building envelope.
$345.45
AUD + GST
$380.00
AUD Inc. GST
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
Product code: IC-12846
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
$569.40
AUD + GST
$626.34
AUD Inc. GST
M 6 stick-in electrode pairs - IC-3700
Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$110.00
AUD + GST
$121.00
AUD Inc. GST
M 25-100 brush electrode pair - IC-3740
Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$160.00
AUD + GST
$176.00
AUD Inc. GST
M 20 drive-in electrode - IC-3300
Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$100.00
AUD + GST
$110.00
AUD Inc. GST
M 18 ram-in electrode - IC-3500
Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$320.909
AUD + GST
$353.00
AUD Inc. GST
Hydromette BL Compact B2 - IC-12030
Product code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head
Product code: IC-12518
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head, for determination of water content of wood chips, wooden pellets, shredded olive stones and sawdust.
$759.90
AUD + GST
$835.89
AUD Inc. GST
BL2 hammer (ram electrode) with 2 meter cable
Product code: IC-12520
BL2 hammer (ram electrode) with 2 meter cable, for determination of water content of round timber and split logs, measuring range 8 to 60% water content.
$569.80
AUD + GST
$626.78
AUD Inc. GST
B 55 Bl active electrode - IC-13755
Product code: IC-13755
The B 55 Bl active electrode is used together with the BL UNI 10 and other similar hydromettes to provide non-destructive measurement of moisture in building materials. Has a measuring range of 0.3 - 8.5 wt.-%/0.3 - 6.5 CM-%, depending on the tested material.
$500.00
AUD + GST
$550.00
AUD Inc. GST
B 50 active electrode - IC-3750
Product code: IC-3750
The active electrode B 50 is a probe designed for the field of structural moisture using the capacitive high frequeny. The electrode is applicable for all Hydromettes that are using this kind of measuring principle.
$200.00
AUD + GST
$220.00
AUD Inc. GST
Hydromette BL H40 1200 Kit
Product code: IC-12100
The BL H 40 unit is an electronic wood moisture meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness), chipboards, and veneers. Kit includes additional m20 drive-n electrode, 10 replacement pins each(16 and 32 mm), MK 8 measuring cable and carrying case.
$642.00
AUD + GST
$706.20
AUD Inc. GST
Digital Concrete Moisture Meter - IC-CMEX2
Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
Tramex Building Survey Inspection Kit - BSIK5.1
Product code: BSIK5.1
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -Ambient Relative Humidity Hygro-i2 Short Probe. -Infrared surface thermometer.
Digital Non-Destructive Moisture Meter - MRH3
Product code: MRH3
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
PROTIMETER SurveyMaster Dual-Function Moisture Meter - IC-BLD5365
Product code: IC-BLD5365
This versatile pin and non-invasive moisture meter is ergonomically designed for easy, one-handed operation to measure moisture in buildings, and other related structures, both on and below the surface. This allows you to assess moisture levels for both new and refurbishing activities, as well as to diagnose moisture-related problems in existing buildings.
Protimeter Digital Mini - IC-BLD5702
Product code: IC-BLD5702
The BLD5702 Digital Mini is a pin type, moisture meter to help assess the moisture levels of building materials for constuction, restoration or repair. It has a pin-type measurement function, displays measurements on a large LED screen.