Construction Meters
ASTM F2170 Accessory Pack for CMEX5 & DL-RHTX
Product code: AP-F2170B
ASTM F2170 Accessory Pack for CMEX5 & DL-RHTX. -Contains 12x reusable Hygro-i2 probes (HIPP12), 1x interface cable (RHIE2B), 1x calibration salt check (SAL75), 1x Hygro-i2 Accessory tools (HI-ACC) and 100x 19mm hole liners (RHHL100).
$2,077.272
AUD + GST
$2,285.00
AUD Inc. GST
Tramex SMM5 Calibration Check Box - CALBOXSMM5
Product code: CALBOXSMM5
The Tramex SMM5 calibration check box is used for checking readings on the Tramex Skipper 5 Moisutre Meter (SMM5) non-destructive impedance type moisture meters. This process allows the user to verify that the instrument is still performing within tolerances deemed acceptable by Tramex.
$139.09
AUD + GST
$153.00
AUD Inc. GST
Tramex ME5 Calibration Check Box - CALBOXME5
Product code: CALBOXME5
The Tramex ME5 calibration check box is used for checking readings on the Tramex Moisture Encounter 5 (ME5) non-destructive impedance type moisture meters. This process allows the user to verify that the instrument is still performing within tolerances deemed acceptable by Tramex.
$139.09
AUD + GST
$153.00
AUD Inc. GST
Tramex Contact Temperature Probe - CTP
Product code: CTP
The CTP Contact Temperature Probe is a plug-in accessory probe used with the FeedBack Data Loggers to measure and log surface temperature over time. -Used alongside the Humidity sensor functions in the Data Logger, dew point circumstances can be easily identified.
$104.545
AUD + GST
$115.00
AUD Inc. GST
Short Narrow RH Probe - RHP-SNWB (for CMEX5)
Product code: RHP-SNWB
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$392.727
AUD + GST
$432.00
AUD Inc. GST
Short Narrow RH Probe - RHP-SNW (for CMEX2 and MRH3)
Product code: RHP-SNW
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$356.363
AUD + GST
$392.00
AUD Inc. GST
Narrow Ambient RH Probe - RHP-NWB (for CMEX5)
Product code: RHP-NWB
The Tramex 260mm Narrow Wand Relative Humidity Probe with bayonet connection for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$490.909
AUD + GST
$540.00
AUD Inc. GST
Narrow Ambient RH Probe - RHP-NW (for CMEX2 and MRH3)
Product code: RHP-NW
The Tramex 260mm Narrow Wand Relative Humidity Probe for CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$454.545
AUD + GST
$500.00
AUD Inc. GST
Short Ambient RH Probe - RHP-SWB (for CMEX5 and MEX5))
Product code: RHP-SWB
Short, ambient, relative humidity probe to evaluate moisture conditions within building structures using Hygro-i2® technology. -Measures relative humidity, temperature, dew point temperature and grains per pound humidity ratio. -Its speed and accuracy makes it appropriate for the evaluation of moisture conditions of wall and cavity structures as well as ambient air conditions within the building envelope.
$322.727
AUD + GST
$355.00
AUD Inc. GST
Leica Trace Rod 80 for DA Signal Transmitter
Product code: LG850279
The Trace Rod for Leica DA Signal Transmitter traces the route of non-metallic drains, ducts or pipes. -Use together with the DA Signal Transmitter, DD100 Series Locator or DD200 Series Smart Locator. -Detection range up to 10’. -Detects non-metallic utilities with up to 4” diameter.
$1,450.00
AUD + GST
$1,595.00
AUD Inc. GST
$495.00
AUD + GST
$544.50
AUD Inc. GST
Leica DA220 3 Watt Signal Transmitter
Product code: LG850273
The Leica DA signal transmitters apply a signal onto underground cables or pipes that may not carry a detectable signal. The Leica DD SMART cable locators can then be used to locate the signal from the Leica DD signal transmitter. -Induction mode frequencies of 32.768 (33) kHz / 8.192 (8) kHz. -Robust and easy to use. -IP67 protection.
$1,850.00
AUD + GST
$2,035.00
AUD Inc. GST
Leica DA220 1 Watt Signal Transmitter
Product code: LG850272
The Leica DA signal transmitters apply a signal onto underground cables or pipes that may not carry a detectable signal. -Induction mode frequencies of 32.768 (33) kHz / 8.192 (8) kHz. -Robust and easy to use. -IP67 protection.
$1,449.50
AUD + GST
$1,594.45
AUD Inc. GST
Tapered Uninsulated - max penetration 14mm - TP30
Product code: TP30
Pack of 10 tapered, non-insulated spare 14mm pins for hand held, heavy duty pin probe HH14TP30 & HH14TP30B.
$90.909
AUD + GST
$100.00
AUD Inc. GST
Straight Insulated Pins - max penetration 72mm (Pack of 2) - SP90
Product code: SP90
Tramex Hammer and handheld Electrode Replacement Pins (Pack of 2) - max penetration 90mm.
$80.909
AUD + GST
$89.00
AUD Inc. GST
Straight Insulated - max penetration 175mm - IC-SP200
Product code: IC-SP200
Tramex Hammer and handheld Electrode Replacement Pins (Pack of 2) - max penetration 72mm
$90.00
AUD + GST
$99.00
AUD Inc. GST
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
Product code: IC-12846
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
$569.40
AUD + GST
$626.34
AUD Inc. GST
M 6 stick-in electrode pairs - IC-3700
Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$110.00
AUD + GST
$121.00
AUD Inc. GST
M 25-100 brush electrode pair - IC-3740
Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$160.00
AUD + GST
$176.00
AUD Inc. GST
M 20 drive-in electrode - IC-3300
Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$100.00
AUD + GST
$110.00
AUD Inc. GST
M 18 ram-in electrode - IC-3500
Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$320.909
AUD + GST
$353.00
AUD Inc. GST
$204.545
AUD + GST
$225.00
AUD Inc. GST
HA21 - Hammer Electrodes (with cable and pins) - HA21SP52
Product code: HA21SP52
Hammer Electrodes (with cable and pins) - HA21SP52
$454.545
AUD + GST
$500.00
AUD Inc. GST
GFS-55 5M X 5 SECTION METRIC FIBREGLASS with 5/8" thread & cover - IC011101
Product code: IC011101
GFS-55 5M X 5 SECTION METRIC FIBREGLASS with 5/8" thread & cover
$339.00
AUD + GST
$372.90
AUD Inc. GST
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head
Product code: IC-12518
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head, for determination of water content of wood chips, wooden pellets, shredded olive stones and sawdust.
$759.90
AUD + GST
$835.89
AUD Inc. GST
BL2 hammer (ram electrode) with 2 meter cable
Product code: IC-12520
BL2 hammer (ram electrode) with 2 meter cable, for determination of water content of round timber and split logs, measuring range 8 to 60% water content.
$569.80
AUD + GST
$626.78
AUD Inc. GST
Bear Genno Rod II Pro - IC-A-B-GENNO-II-E
Product code: IC-A-B-GENNO-II-E
3.7 metre Heavy Duty Cut 'n Fill levelling staff with lever lock receiver holder, levelling bubble, extension pole and carry bag
$155.00
AUD + GST
$170.50
AUD Inc. GST
Bear Genno Rod II - IC-A-B-GENNO-II
Product code: IC-A-B-GENNO-II
2.5 metre Heavy Duty Cut 'n Fill levelling staff with lever lock receiver holder, levelling bubble and carry bag
$125.00
AUD + GST
$137.50
AUD Inc. GST
Bear Genno Rod I - IC-A-B-GENNO-M
Product code: IC-A-B-GENNO-M
Ecconomy Cut 'n Fill levelling staff and bag ( No Extension )
$105.00
AUD + GST
$115.50
AUD Inc. GST
B 55 Bl active electrode - IC-13755
Product code: IC-13755
The B 55 Bl active electrode is used together with the BL UNI 10 and other similar hydromettes to provide non-destructive measurement of moisture in building materials. Has a measuring range of 0.3 - 8.5 wt.-%/0.3 - 6.5 CM-%, depending on the tested material.
$500.00
AUD + GST
$550.00
AUD Inc. GST