Moisture Meter Accessories
Reachmaster Pro Abrasion Plate Kit with Screws
Product code: IC-BLD5777-A
Protimeter BLD5777-A - Reachmaster Pro Abrasion Plate Kit with Screws for Protimeter Reachmaster PRO.
$46.00
AUD + GST
$50.60
AUD Inc. GST
CALCHECK Calibration Device
Product code: IC-BLD5086
Calcheck device for Protimeter pin-type meter range meters.
$24.00
AUD + GST
$26.40
AUD Inc. GST
Replacement Battery Cover for the MMS2
Product code: IC-BLD8800BATCAP
Replacement Battery Cover for the MMS2.
$16.00
AUD + GST
$17.60
AUD Inc. GST
Protimeter BLD2000BAT Battery Cover for Surveymaster/TimberMaster /Mini/Aquant
Product code: IC-BLD2000BAT
Protimeter BLD2000BAT Battery Cover for Surveymaster/TimberMaster /Mini/Aquant.
$14.00
AUD + GST
$15.40
AUD Inc. GST
Protimeter BLD5365-BATCAP Battery Cover for Surveymaster (BLD5365), Aquant (BLD5765), Digital Mini (BLD5702)
Product code: IC-BLD5365-BATCAP
Battery Cover for Surveymaster (BLD5365)/Aquant (BLD5765)/Digital Mini (BLD5702).
$19.40
AUD + GST
$21.34
AUD Inc. GST
Pin Cap for aNew Surveymaster (BLD5365) and Digital Mini (BLD5702)
Product code: IC-BLD5365-WMECAP
Pin Cap for aNew Surveymaster (BLD5365) and Digital Mini (BLD5702).
$16.00
AUD + GST
$17.60
AUD Inc. GST
Needle nuts (ferrule) 2 Pack
Product code: IC-BLD0501
Protimeter Needle Nuts (ferrule) 2 Pack for Protimeter moisture meters.
$19.80
AUD + GST
$21.78
AUD Inc. GST
FLIR MR10-2 Protective Case for FLIR Moisture Meters
Product code: MR10-2
The Flir MR10-2 Protective Case for Flir Moisture Meter will safeguard your valuable FLIR instruments and replaces the original MR-10. Stow your FLIR Moisture Meter in this durable EVA protective case to shield against dirt, dings, and harsh environmental conditions.
$82.49
AUD + GST
$90.74
AUD Inc. GST
WILE 251 Bale Moisture Probe 50cm
Product code: Wile-251
Bale moisture probe for Wile 25 and 26 hay and silage moisture meters.
$109.00
AUD + GST
$119.90
AUD Inc. GST
humimeter USB data interface module with LogMemorizer
Product code: IC-12278
humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC
$689.10
AUD + GST
$758.01
AUD Inc. GST
humimeter GF2 sensor package for carpenters
Product code: IC-13748
humimeter GF2 sensor package for carpenters. Includes conductance electronics, hand electrode for wood and plaster, air humidity and temperature sensor (0-100%).
$1,179.40
AUD + GST
$1,297.34
AUD Inc. GST
humimeter GF2 sensor package for caretakers
Product code: IC-13739
humimeter GF2 sensor package for caretakers. Includes conductance electronics, hand electrode for wood and plaster, air humidity and temperature sensor (0-100%), carbon dioxide sensor (5000 ppm), non-contact IR temperature sensor ( -25 to +125 C), and plastic case.
$969.50
AUD + GST
$1,066.45
AUD Inc. GST
humimeter GF2 sensor package for building surveyors
Product code: IC-13744
humimeter GF2 sensor package for building surveyors. Includes conductance electronics, hand electrode for wood and plaster, air humidity and temperature sensor (0-100%), carbon dioxide sensor (5000 ppm), non-contact IR temperature sensor ( -25 to +125 C), GF2 Pair of plug-in electrode, GF2 Pair of flat electrodes, 300 mm length, and plastic case.
$1,379.00
AUD + GST
$1,516.90
AUD Inc. GST
TT 40 BL Pt100 sensor - IC-13180
Product code: IC-13180
The TT 40 BL is a Robust immersion and combustion gas temperature sensor for temperature measurement of liquids or viscous materials such as glues, hot glue or asphalt or tar.
TF-IR BL active electrode - IC-13100
Product code: IC-13100
The TF-IR Bl active electrode is used together with the BL UNI 10 and other similar hydromettes to perform climate measurements (air humidity and temperature) and infrared surface temperature measurements.
$500.00
AUD + GST
$550.00
AUD Inc. GST
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
Product code: IC-12846
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
$569.40
AUD + GST
$626.34
AUD Inc. GST
Set of tips for measuring hay and straw bales for BL2 hammer probe
Product code: IC-12521
Set of tips for measuring hay and straw bales, for mounting at BL2 hammer probe. 2 stainless steel tips, 4 mm diameter, 255 mm in length.
$159.60
AUD + GST
$175.56
AUD Inc. GST
OT 100 BL Pt100 sensor - IC-13170
Product code: IC-13170
The OT 100 BL is a spring loaded surface probe with small mass that is used to measure the surface temperature of walls.
$300.00
AUD + GST
$330.00
AUD Inc. GST
Non-contact infrared temperature sensor for humimeter GF2 and FLH - IC-12513
Product code: IC-12513
Non-contact infrared temperature sensor for humimeter GF2 and FLH
$199.50
AUD + GST
$219.45
AUD Inc. GST
$80.00
AUD + GST
$88.00
AUD Inc. GST
MB 35 active electrode - IC-3770
Product code: IC-3770
The active electrode MB 35 is a special probe designed for the field of structural moisture. The electrode is applicable for the Hydromettes M 4050, RTU 600, HB 30, UNI 1 and UNI 2.
IR 40 BL active electrode - IC-3150
Product code: IC-3150
The IR 40 BL active electrode is used together with the BL UNI 10 to make surface temperature readings through contactless infrared technology.
Insertion probe with stainless steel probe of 0.3 meter length - IC-13158
Product code: IC-13158
Insertion probe with stainless steel probe of 0.3 meter length. Used for measuring straw and hay bales.
$749.70
AUD + GST
$824.67
AUD Inc. GST
FLIR MR10-2 Protective Case for FLIR Moisture Meters
Product code: IC-MR10-2
The Flir MR10-2 Protective Case for Flir Moisture Meter will safeguard your valuable FLIR instruments and replaces the original MR-10. Stow your FLIR Moisture Meter in this durable EVA protective case to shield against dirt, dings, and harsh environmental conditions.
$90.00
AUD + GST
$99.00
AUD Inc. GST
Flir MR07 Hammer Probe - IC-MR07
Product code: IC-MR07
Hammer Probe with Shoulder Bag for FLIR Moisture Meters
$496.49
AUD + GST
$546.14
AUD Inc. GST
Flir MR05 Impact Pin Moisture Probe for MR77, MR160
Product code: IC-MR05
Impact Pin Moisture Probe For MR77 Psychrometer Moisture Meter and MR160 Thermal Moisture Meter
$124.49
AUD + GST
$136.94
AUD Inc. GST
$1,169.10
AUD + GST
$1,286.01
AUD Inc. GST
ET 10 BL Pt100 sensor - IC-13165
Product code: IC-13165
The ET 10 BL stick-in active electrode is used together with the BL UNI 10 to make surface temperature readings through contactless infrared technology. This electrode is useful when the probe needs to make direct contact with the material such in liquids and soft, solid materials.
$220.909
AUD + GST
$243.00
AUD Inc. GST
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head
Product code: IC-12518
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head, for determination of water content of wood chips, wooden pellets, shredded olive stones and sawdust.
$759.90
AUD + GST
$835.89
AUD Inc. GST