pH Meters
2310T-S Conductivity/Temp. Electrode, 8pin
Product code: IC-2310T-S
Apera Instruments 2310T-S Conductivity/Temp. electrode is designed for conductivity measurement in the high range (20 to 2,000 mS/cm, K=10). The electrode is equipped with platinum black coated ring sensor and provides stable and accurate high range conductivity measurement. The integrated thermistor allows simultaneous temperature measurement and thus automatic temperature compensation. Accuracy: +/- 1.5% of final value; Without calibration, the accuracy is +/- 10% F.S Suitable for highly concentrated electrolytes, salt water and other solutions with high conductivity.
$229.10
AUD + GST
$252.01
AUD Inc. GST
3501PT-C ORP Glass Electrode
Product code: IC-3501Pt-C
Glass electrode for ORP with high-quality platinum sensor. Recommendation of use for for general use in aqueous solutions, wastewater, galvanic solutions, organic sample solutions, with high temperatures and continuous measurement. Built with Apera's proprietary platinum ORP sensor. Gel KCL electrolyte adopted; No need for refilling. Standard BNC connector.
$199.40
AUD + GST
$219.34
AUD Inc. GST
301Pt-C ORP Combination Electrode, BNC Connector
Product code: IC-301Pt-Cu
Apera Instruments 301Pt-C Combination ORP Electrode is built with a high-quality platinum ORP sensor and gel KCL electrolyte (no need for refill), suitable for general water solutions testing and wastewater treatment. With the standard BNC connector, the electrode is compatible with any ORP meters that use BNC connectors. Built with Apera's proprietary platinum ORP sensor. Gel KCL electrolyte adopted; No need for refilling. Standard BNC connector.
$159.60
AUD + GST
$175.56
AUD Inc. GST
201-C Combination pH Electrode, BNC Connector
Product code: IC-201-C
Apera Instruments 201-C Combination pH Electrode is an economical choice for a reliable combination pH electrode, designed for general water solutions' pH measurement in scientific research, environmental monitoring, and quality control. Built with lithium glass membrane. Compatible with any pH meters that use BNC connectors. Not suitable for testing in low-ion concentration solutions (e.g. deionized water or distilled water), strong base and strong acid solutions, highly corrosive liquid, or for continuous testing in high-temperature solutions (>60 C).
$89.60
AUD + GST
$98.56
AUD Inc. GST
$219.10
AUD + GST
$241.01
AUD Inc. GST
$189.00
AUD + GST
$207.90
AUD Inc. GST
9301-10D ORP Electrode
Product code: 9301-10D
Waterproof non-refillable ORP electrode with plastic body and platinum sensor. The flat platinum sensor at the tip allows measurement of low-volume samples. Waterproof. Non-refillable. Combination electrode.
$379.60
AUD + GST
$417.56
AUD Inc. GST
9371-10D Conductivity Cell
Product code: 9371-10D
Conductivity cell for measuring Ultra Pure Water samples. Specifically made to measure organic solvents. Low conductivity measurements (0.01~500 µS/cm) with BNC connector. This cell can be connected with the meters which equip BNC connector such as the Horiba 200/F-70/1500/2000 series.
$749.50
AUD + GST
$824.45
AUD Inc. GST
9382-10D Conductivity Cell (Submersible Type)
Product code: 9382-10D
Conductivity Cell (Submersible Type). Titanium coated with platinum black, plastic body. Measurement Range: 1 uS/cm to 100 mS/cm. With integrated temperature sensor. Cable Length: 1m.
$419.40
AUD + GST
$461.34
AUD Inc. GST
2565A-10T Reference Electrode
Product code: 2565A-10T
Reference electrode for measurements of liquid other than normal aqueous solutions, such as suspensions, emulsions, paste, and non-aqueous solutions.
$349.00
AUD + GST
$383.90
AUD Inc. GST
9425-10C pH Electrode
Product code: 9425-10C
General purpose pH electrode. With plastic body, refillable. Recommended for measuring pH in non-aqueous samples.
$209.70
AUD + GST
$230.67
AUD Inc. GST
9481-10C Sleeve ToupH Electrode
Product code: 9481-10C
The 9481-10C Sleeve ToupH electrode is made specifically for measuring viscous and non-aqueous samples (e.g., solvents, cosmetics, paints). The liquid junction is designed with a movable sleeve that prevents clogging. Easy to clean and provides quick stable readings. Waterproof; made with Pb-free glass.
$529.30
AUD + GST
$582.23
AUD Inc. GST
9480-10C Long ToupH Electrode
Product code: 9480-10C
The 9480-10C Long ToupH electrode is made specifically for measuring testing samples in large containers and long test tubes (e.g., microbial culture fluids). Electrode: 251mm length, 7mm diameter. Constructed with responsive glass that is 10x stronger than JIS standards. Waterproof, Pb-free glass.
$419.40
AUD + GST
$461.34
AUD Inc. GST
9415-10C Standard ToupH Electrode
Product code: 9415-10C
The 9415-10C standard ToupH electrode is made specifically for general laboratory applications, especially for buffers and aqueous test solutions. Offers quick stability and drift reduction. Constructed with responsive glass that is 10x stronger than JIS standards. The dome-shaped tip provides strength in all directions, reducing damage concerns. Waterproof, Pb-free glass.
$279.80
AUD + GST
$307.78
AUD Inc. GST
9630-10D ph Electrode
Product code: 9630-10D
The 9630-10D is a plastic-body, refillable pH electrode specifically for measuring samples with low conductivity or low buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.
$529.90
AUD + GST
$582.89
AUD Inc. GST
9632-10D pH Electrode
Product code: 9632-10D
The 9632-10D is a plastic-body, refillable pH electrode specifically for measuring strong alkali samples. With integrated temperature sensor has higher resistance and longer stability than conventional electrodes.
$609.00
AUD + GST
$669.90
AUD Inc. GST
9625-20D pH Electrode
Product code: 9625-20D
The 9625-10D is plastic-body, refillable pH electrode with integrated temperature sensor is recommended for general-purpose use.
$439.90
AUD + GST
$483.89
AUD Inc. GST
9652-20D pH Electrode
Product code: 9652-20D
The 9652-20D plastic-body, gel-filled pH electrode built for field testing. It integrated with temperature sensor with a 2m cable with a durable body that does not require refills.
$269.40
AUD + GST
$296.34
AUD Inc. GST
9651-10D pH Electrode
Product code: 9651-10D
The 9651-20D plastic-body, gel-filled pH electrode built for field testing. It integrated with temperature sensor with a durable body that does not require refills.
$229.80
AUD + GST
$252.78
AUD Inc. GST
Testo pH Buffer Solution (7.00) - 0554-2063
Product code: 0554-2063
Buffer solution with 7.00 pH value in practical dosing bottle with DAkkS calibration certificate. For use with testo 205 meters.
$39.00
AUD + GST
$42.90
AUD Inc. GST
Testo pH Buffer Solution (4.01) - 0554-2061
Product code: 0554-2061
Buffer solution with 4.01 pH value in practical dosing bottle with DAkkS calibration certificate. For use with testo 205 meters.
$39.00
AUD + GST
$42.90
AUD Inc. GST
$179.40
AUD + GST
$197.34
AUD Inc. GST
$31.80
AUD + GST
$34.98
AUD Inc. GST
$179.00
AUD + GST
$196.90
AUD Inc. GST
$31.80
AUD + GST
$34.98
AUD Inc. GST
pH Buffer Solution (pH 10, 3.8 litres)
Product code: ML-PH10G
pH Buffer Solution (pH 10, 3.8 litres).
$179.20
AUD + GST
$197.12
AUD Inc. GST
$31.80
AUD + GST
$34.98
AUD Inc. GST
$88.00
AUD + GST
$96.80
AUD Inc. GST
HI700636P Cleaning Solution for Wine Stains (25 x 20 mL Sachets)
Product code: IC-HI700636P
The HI700636P is a highly effective cleaning solution that is specially formulated for use with pH electrodes that become stained by with wine juice or must. Electrodes can become stained from use and can produce inaccurate results even. Hanna’s cleaning solution for wine stains will remove residues that are left on electrode surfaces. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. -Specially formulated cleaning solution to remove wine deposits from a pH electrode. -Convenient, one-time use sachets ensure freshness of solution.
$79.60
AUD + GST
$87.56
AUD Inc. GST
HI700635P Cleaning Solution for Wine Deposits (25 x 20 mL Sachets)
Product code: IC-HI700635
The HI700635P is a highly effective cleaning solution that is specially formulated for use with pH electrodes that become coated with wine juice and must deposits. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. -Specially formulated cleaning solution to remove wine deposits from a pH electrode. -Convenient, one-time use sachets ensure freshness of solution.
$79.90
AUD + GST
$87.89
AUD Inc. GST