Other Meters
Kyoritsu 6141 Contractor's Pack
Product code: 6141
Contractor’s pack containing insulation tester, digital multimeter, and AC clamp meter: -Kyoritsu 3132A: Suitable for multifunction testing of appliances and installations. -Kyoritsu 1009: Digital multimeter for general purpose testing. -Kyoritsu KT20: Clamp meter for general purpose testing.
$939.50
AUD + GST
$1,033.45
AUD Inc. GST
Kyoritsu KEW6024PV PV Earth Insulation Tester
Product code: 6024PV
Waterproof insulation earth tester that correctly measures insulation resistance even if the panel is under generating power. Appropriate for use during bad weather conditions.
$1,969.90
AUD + GST
$2,166.89
AUD Inc. GST
Kyoritsu 6011A 5 in 1 Multifunction Tester
Product code: 6011A
The Kyoritsu 6011A is a 5 in 1 Digital Multifunction Tester capable of continuity, insulation, loop, prospective short current (PSC) and RCD trip testing, in compliance with IEC 61557.
$2,299.60
AUD + GST
$2,529.56
AUD Inc. GST
Kyoritsu 6010B 5 in 1 Multifunction Tester
Product code: 6010B
The Kyoritsu 6010B is a 5 in 1 Digital Multifunction Tester capable of continuity, insulation, loop and RCD testing as well as measuring continuous operating voltage of a protective device (U c ). The 6010B features an easy to use handheld design with built in memory (up to 300 results) and a large dual display with bright backlight and bar graph.
$1,059.10
AUD + GST
$1,165.01
AUD Inc. GST
Kyoritsu 5711 Voltage Detector
Product code: 5711
Pen voltage detector. Senses AC voltage through insulation, buzzer sounds and tip glows upon ac voltage detection.
$79.90
AUD + GST
$87.89
AUD Inc. GST
Kyoritsu 5410 Digital RCD ELCB Tester
Product code: 5410
The Kyoritsu 5410 is a digital RCD tester with the ability to measure RCD trip time and trip out current. Designed to an IP54 rating, the 5410 can measure voltage, detect contact voltage and be battery operated.
$1,479.90
AUD + GST
$1,627.89
AUD Inc. GST
Kyoritsu 5406A Digital RCD ELCB Tester with Auto Ramp Function
Product code: 5406A
The Kyoritsu 5406A digital RCD tester is capable of testing a large variety of RCDs and features an auto ramp function. Designed to comply with an IP54 rating, the 5406A is comprised of a custom microprocessor to achieve high accuracy and reliability.
$519.50
AUD + GST
$571.45
AUD Inc. GST
1 in stock
Kyoritsu 2510 DC Milliamp Process Clamp Logger
Product code: 2510
Kyoritsu 2510 measures 4 to 20 mA instrumentation and processes signals without breaking the loop. You can also transfer data to you PC via Bluetooth for easy access; stores up to 192000 data sets.
$2,039.80
AUD + GST
$2,243.78
AUD Inc. GST
Kyoritsu 2500 DC Milliamp Clamp Meter
Product code: 2500
The Kyoritsu 2500 is a high resolution, low current DC clamp meter. Featuring a 0.01mA resolution and 0.02% accuracy, the 2500 model is ideal for automotive and process control industries.
$1,119.70
AUD + GST
$1,231.67
AUD Inc. GST
Kyoritsu 2434 AC Leakage 100A Clamp Meter
Product code: 2434
The Kyoritsu 2434 is a 100A AC clamp meter, with the ability to measure current leakage. Comprising a 28mm jaw, the 2434 model is ideal for detecting wire faults and insulation breakdown.
$749.70
AUD + GST
$824.67
AUD Inc. GST
Kyoritsu 2433R AC Leakage 400A Clamp Meter with True RMS
Product code: 2433R
The Kyoritsu 2433R is a 400A AC clamp meter, capable of measuring current leakage. The Kyoritsu 2433R also has true RMS measurements providing accurate current readings for non-sinusoidal waveforms. Comprising a 40mm jaw, the 2433R model is ideal for detecting wire faults and insulation breakdown.
$1,299.80
AUD + GST
$1,429.78
AUD Inc. GST
Kyoritsu 2433 AC Leakage 400A Clamp Meter
Product code: 2433
The Kyoritsu 2433 is a 400A AC clamp meter, capable of measuring current leakage. Comprising a 40mm jaw, the 2433 model is ideal for detecting wire faults and insulation breakdown.
$1,149.50
AUD + GST
$1,264.45
AUD Inc. GST
KYORITSU 2432 Leakage Clamp Meter – 100A
Product code: 2432
The Kyoritsu 2432 is a high sensitivity 100A AC clamp meter, capable of measuring small leakage currents. With it’s 40mm jaw, the Kyoritsu 2432 is ideal for detecting wire faults and insulation breakdown.
$1,249.70
AUD + GST
$1,374.67
AUD Inc. GST
KYORITSU 2431 Leakage Clamp Meter – 200A
Product code: 2431
The Kyoritsu 2431 is a 200A AC clamp meter, capable of measuring current leakage. Comprising a 24mm jaw, the 2431 model is ideal for detecting wire faults and insulation breakdown.
$1,199.80
AUD + GST
$1,319.78
AUD Inc. GST
KYORITSU 2413R Leakage Clamp Meter – 1000A
Product code: 2413R
The Kyoritsu 2413R is 1000A True RMS AC clampmeter, that is also able to measure leakage current. It has extra wide 68mm opening jaws which provides it with the ability to clamp on all three or four phase wires to measure the total leakage current measurement.
$1,539.90
AUD + GST
$1,693.89
AUD Inc. GST
Kyoritsu 2300R AC/DC Fork Current Tester
Product code: 2300R
The Kyoritsu FORK 2300R 100A tester can be used in crowded connection boxes, where cables are very short, and space is too limited to clamp cables using a traditional clamp meter.
$449.80
AUD + GST
$494.78
AUD Inc. GST
Kyoritsu 2127R AC Digital Clamp Meter – 1000A
Product code: 2127R
1000A AC Clamp Meter, AC60/600/1000A with Auto Range with True-RMS. The Kyoritsu 2127R’s ergonomic over-molded body allows convenient one-handed operation with a full safety jaw and large, easy-to-read display for ease of use on the job.
$339.30
AUD + GST
$373.23
AUD Inc. GST
KYORITSU 2117R AC Digital Clamp Meter – 1000A
Product code: 2117R
The KYORITSU 2117R AC Digital Clamp Meter measures AC current in three ranges 60A / 600A and 1000A in TrueRMS mode with a resolution of 0.01A on the lowest 60A range. The ranges change automatically as the measured value changes. The tear-drop jaws can measure cable with a maximum diameter of 33mm.
$259.80
AUD + GST
$285.78
AUD Inc. GST
2060BT Kyoritsu Digital Clamp Multimeter
Product code: 2060BT
Digital clamp multimeter with large jaws; appropriate for busbar and large currents. Conductor size 75mm diameter and busbar of 80 x 30mm or less.
$2,339.60
AUD + GST
$2,573.56
AUD Inc. GST
Kyoritsu 2056R 1000A True RMS Digital AC/DC CAT IV Clamp Meter
Product code: 2056R
Designed to meet international safety standard IEC 61010-1 CAT IV 600V, the Kyoritsu 2056R is a digital clamp meter with the capability to read current up to 1000A AC/DC. The 2056R model features the ability to utilise True RMS measurements, providing greater accuracy on non-sinusoidal waveforms.
$499.00
AUD + GST
$548.90
AUD Inc. GST
Kyoritsu 2055 1000A Digital AC/DC CAT IV Clamp Meter
Product code: 2055
The Kyoritsu 2055 is a CAT IV rated clamp meter with 40mm jaw size that can measure voltage and current in both low and high powered circuits, and has the ability to read up to 1000A AC/DC and 600V AC/DC. The Kyoritsu 2055 is suitable for use within power distribution companies, power utilities and maintenance sections.
$529.90
AUD + GST
$582.89
AUD Inc. GST
Kyoritsu 2046R True RMS AC/DC Clamp Meter
Product code: 2046R
The Kyoritsu 2046R is a professional digital clamp meter, with the ability to measure both AC and DC current. Featuring True RMS measurement, the 2046R provides accurate current readings even with non-sinusoidal waveforms.
$559.20
AUD + GST
$615.12
AUD Inc. GST
Kyoritsu 2033 Miniature AC/DC Clamp Meter
Product code: 2033
The Kyoritsu 2033 is a compact AC/DC digital clamp meter, capable of measuring currents up to 300A. Featuring autoranging, the Kyrotisu 2033 allows for currents to be measured at a resolution of 0.01A AC and DC using its 24mm clamp.
$769.20
AUD + GST
$846.12
AUD Inc. GST
Kyoritsu 2031 Miniature AC Clamp Meter
Product code: 2031
The Kyoritsu 2031 is a digital clamp meter with the ability to measure current up to 200A. Small in construction, the 2031 is designed for portability and speed of use. Featuring a 24mm tear shaped jaw, the Kyoritsu 2031 can measure currents to 200A AC. Portable in design, the 2031 is a compact current clamp meter that includes a data-hold function and auto-power off to conserve battery.
$389.70
AUD + GST
$428.67
AUD Inc. GST
Kyoritsu 2012RA Multimeter with True RMS and AC/DC Clamp Sensor
Product code: 2012RA
The Kyoritsu 2012R is a digital multimeter, incorporating the ability to read both voltage and current, via true RMS measurements.
$410.00
AUD + GST
$451.00
AUD Inc. GST
Kyoritsu 2010 Low Voltage AC/DC Digital Clamp Meter, 20A
Product code: 2010
Designed for use on low voltage circuits, this clamp meter is small in size and easy to transport. Clamp-on sensor is separated from the display unit, allowing the user to take easy measurements and readings in cramped quarters and around crowded wiring. Minimum resolution of 0.1mA AC and 1mA DC current.
$1,759.40
AUD + GST
$1,935.34
AUD Inc. GST
Kyoritsu 2009R AC/DC Digital Clamp Meter – 2000A
Product code: 2009R
The Kyoritsu 2009R clamp meter can measure the voltage and current in both very low and high power circuits and indicates accurate True RMS readings of AC current or voltage with distorted waveform. It can also measure AC and DC currents up to 2000A.
$1,299.10
AUD + GST
$1,429.01
AUD Inc. GST
KYORITSU 2003A AC/DC Digital Clamp Meter 2000A
Product code: 2003A
AC/DC digital clamp meter with with transformer jaws of large diameter. Can measure AC and DC currents up to 2000A.
$1,009.00
AUD + GST
$1,109.90
AUD Inc. GST
Kyoritsu 2002R 2000A AC Clamp Meter
Product code: 2002R
The Kyoritsu 2002R is a professional digital clamp meter, with the ability to measure large currents up to 2000A AC. Featuring True RMS measurement, the 2002R provides accurate current readings even with non-sinusoidal waveforms.
$719.30
AUD + GST
$791.23
AUD Inc. GST
KYORITSU 2002PA AC Digital Clamp Meter – 2000A
Product code: 2002PA
The KYORITSU 2002PA AC Digital Clamp Meter features tear-drop shaped jaws for ease of use in tight cable areas. and provides a wide measuring range of up to 2000A AC. It has a millivolt output function for longer term measurement or datalogging of current and a wide frequency measurement range of 40Hz to 1kHz.
$769.60
AUD + GST
$846.56
AUD Inc. GST