pH Electrodes
Temperature Compensation Electrode 4163-10T
Product code: 4163-10T
Required if separate temperature probe requested. Suitable for 20 series & 50 Series.
$309.70
AUD + GST
$340.67
AUD Inc. GST
ORP60-E Replacement Probe for ORP60 Pocket ORP Tester
Product code: IC-ORP60-E
The Apera Instruments ORP60-E is the replacement probe for ORP60 Smart ORP Pocket Tester, also compatible with PH60, PH60S, PH60F. This probe features a Platinum ORP sensor with a built-in temperature sensor. Designed for general water solution testing's ORP measurement.
$119.80
AUD + GST
$131.78
AUD Inc. GST
1 in stock
9371-10D Conductivity Cell
Product code: 9371-10D
Conductivity cell for measuring Ultra Pure Water samples. Specifically made to measure organic solvents. Low conductivity measurements (0.01~500 µS/cm) with BNC connector. This cell can be connected with the meters which equip BNC connector such as the Horiba 200/F-70/1500/2000 series.
$749.50
AUD + GST
$824.45
AUD Inc. GST
Standard glass body ToupH electrode IC-9615S-10D
Product code: 9615S-10D
Recommended for preparing buffers. Can be used on a wide range of aqueous test solutions. Electrode can be used for all pH Meters of the 20, 50 & 70 Series.
$349.40
AUD + GST
$384.34
AUD Inc. GST
Ph Electrode (Plastic, Refillable) With Temperature Sensor
Product code: IC-ST310
3-in-1 plastic refillable pH electrode. Suitable for testing aqueous samples, cosmetic samples/emulsions and shampoo, creams and liquid soaps.
$214.83
AUD + GST
$236.31
AUD Inc. GST
Refillable Combination pH Electrode with BNC Connector
Product code: IC-HI1131B
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass.
$299.00
AUD + GST
$328.90
AUD Inc. GST
2310T-S Conductivity/Temp. Electrode, 8pin
Product code: IC-2310T-S
Apera Instruments 2310T-S Conductivity/Temp. electrode is designed for conductivity measurement in the high range (20 to 2,000 mS/cm, K=10). The electrode is equipped with platinum black coated ring sensor and provides stable and accurate high range conductivity measurement. The integrated thermistor allows simultaneous temperature measurement and thus automatic temperature compensation. Accuracy: +/- 1.5% of final value; Without calibration, the accuracy is +/- 10% F.S Suitable for highly concentrated electrolytes, salt water and other solutions with high conductivity.
$229.10
AUD + GST
$252.01
AUD Inc. GST
$189.00
AUD + GST
$207.90
AUD Inc. GST
9301-10D ORP Electrode
Product code: 9301-10D
Waterproof non-refillable ORP electrode with plastic body and platinum sensor. The flat platinum sensor at the tip allows measurement of low-volume samples. Waterproof. Non-refillable. Combination electrode.
$379.60
AUD + GST
$417.56
AUD Inc. GST
9382-10D Conductivity Cell (Submersible Type)
Product code: 9382-10D
Conductivity Cell (Submersible Type). Titanium coated with platinum black, plastic body. Measurement Range: 1 uS/cm to 100 mS/cm. With integrated temperature sensor. Cable Length: 1m.
$419.40
AUD + GST
$461.34
AUD Inc. GST
2565A-10T Reference Electrode
Product code: 2565A-10T
Reference electrode for measurements of liquid other than normal aqueous solutions, such as suspensions, emulsions, paste, and non-aqueous solutions.
$349.00
AUD + GST
$383.90
AUD Inc. GST
9425-10C pH Electrode
Product code: 9425-10C
General purpose pH electrode. With plastic body, refillable. Recommended for measuring pH in non-aqueous samples.
$209.70
AUD + GST
$230.67
AUD Inc. GST
9481-10C Sleeve ToupH Electrode
Product code: 9481-10C
The 9481-10C Sleeve ToupH electrode is made specifically for measuring viscous and non-aqueous samples (e.g., solvents, cosmetics, paints). The liquid junction is designed with a movable sleeve that prevents clogging. Easy to clean and provides quick stable readings. Waterproof; made with Pb-free glass.
$529.30
AUD + GST
$582.23
AUD Inc. GST
9480-10C Long ToupH Electrode
Product code: 9480-10C
The 9480-10C Long ToupH electrode is made specifically for measuring testing samples in large containers and long test tubes (e.g., microbial culture fluids). Electrode: 251mm length, 7mm diameter. Constructed with responsive glass that is 10x stronger than JIS standards. Waterproof, Pb-free glass.
$419.40
AUD + GST
$461.34
AUD Inc. GST
9415-10C Standard ToupH Electrode
Product code: 9415-10C
The 9415-10C standard ToupH electrode is made specifically for general laboratory applications, especially for buffers and aqueous test solutions. Offers quick stability and drift reduction. Constructed with responsive glass that is 10x stronger than JIS standards. The dome-shaped tip provides strength in all directions, reducing damage concerns. Waterproof, Pb-free glass.
$279.80
AUD + GST
$307.78
AUD Inc. GST
9630-10D ph Electrode
Product code: 9630-10D
The 9630-10D is a plastic-body, refillable pH electrode specifically for measuring samples with low conductivity or low buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.
$529.90
AUD + GST
$582.89
AUD Inc. GST
9632-10D pH Electrode
Product code: 9632-10D
The 9632-10D is a plastic-body, refillable pH electrode specifically for measuring strong alkali samples. With integrated temperature sensor has higher resistance and longer stability than conventional electrodes.
$609.00
AUD + GST
$669.90
AUD Inc. GST
9652-20D pH Electrode
Product code: 9652-20D
The 9652-20D plastic-body, gel-filled pH electrode built for field testing. It integrated with temperature sensor with a 2m cable with a durable body that does not require refills.
$269.40
AUD + GST
$296.34
AUD Inc. GST
9651-10D pH Electrode
Product code: 9651-10D
The 9651-20D plastic-body, gel-filled pH electrode built for field testing. It integrated with temperature sensor with a durable body that does not require refills.
$229.80
AUD + GST
$252.78
AUD Inc. GST
MLSS2OZ 20 oz pH Sensor Storage Solution
Product code: MLSS2OZ
MLSS2OZ 20 oz pH sensor storage solution.
$41.00
AUD + GST
$45.10
AUD Inc. GST
Spare EC Sensor for HI769819X Probe
Product code: HI7698194-3
The HI7698194-3 is a replaceable 4-ring electrode conductivity sensor for use with Hanna's family of multiparameter portable meters and probes. -ABS Sensor Body. -4-Ring Stainless Steel Electrodes. -Color Coded Sensor.
$419.70
AUD + GST
$461.67
AUD Inc. GST
Spare pH/ORP Sensor for HI769819X Probe
Product code: HI7698194-1
The HI7698194-1 is a replaceable pH/ORP sensor for use with Hanna's family of multiparameter portable meters and probes. -PEI Sensor Body. -Ceramic Double Junction Reference. -Color Coded Sensor.
$419.90
AUD + GST
$461.89
AUD Inc. GST
2301T-S Conductivity/Temp. Electrode (K=1), 8-pin Connector
Product code: 2301T-S
Apera Instruments 2301T-S Conductivity/Temp. Electrode is built with a proprietary brush-resistant platinum black conductivity sensor, which ensures high accuracy in a wide range of conductivity measurements (0 to 200 mS/cm). -Built-in temperature sensor, testing conductivity and temperature simultaneously, supporting ATC. -Equipped with a detachable probe storage cap, keeping the sensor hydrated when not in use. -POM body, ideal for use in harsh environments
$139.20
AUD + GST
$153.12
AUD Inc. GST
pH Electrode for Beer Analysis - IC-FC214D
Product code: IC-FC214D
The FC214D is a titanium body, gel filled, single reference junction pH electrode. This electrode features high temperature glass and an extendable cloth type junction, along with a built-in temperature sensor and amplifier in a single probe design.
$329.50
AUD + GST
$362.45
AUD Inc. GST
$739.30
AUD + GST
$813.23
AUD Inc. GST
Replacement electrode for PH7011 and PH7200 - 700E-P
Product code: 700E-P
Replacement electrode for PH7011 and PH7200
$79.00
AUD + GST
$86.90
AUD Inc. GST
Replacement Electrode for PH-2
Product code: PE-12
Spare replacement probe - combined general purpose pH sensor for PH222
$79.00
AUD + GST
$86.90
AUD Inc. GST
WQ 300 pH Sensor Kit with 5m Cable (USA)
Product code: IC-WQ300-PH-KIT-5M-USA
WQ 300 PH Sensor Kit (USA) for WQ series meters. Includes pH sensor head, pH sensor cartridge with 5m cable, one 60 ml pH 4 calibration solution, one 60 ml pH 7 calibration solution, and one 60 ml pH 10 calibration solution.
$819.20
AUD + GST
$901.12
AUD Inc. GST
WQ 300 pH Sensor Kit with 5m Cable (NIST)
Product code: IC-WQ300-PH-KIT-5M-NIST
WQ 300 PH Sensor Kit (NIST) for WQ series meters. Includes pH sensor head, pH sensor cartridge with 5m cable, one 60 ml pH 4.01 calibration solution, one 60 ml pH 6.86 calibration solution, and one 60 ml pH 9.18 calibration solution.
$819.60
AUD + GST
$901.56
AUD Inc. GST
WQ 300 pH Sensor Kit with 2m Cable (USA)
Product code: IC-WQ300-PH-KIT-2M-USA
WQ 300 PH Sensor Kit (USA) for WQ series meters. Includes pH sensor head, pH sensor cartridge, one 60 ml pH 4 calibration solution, one 60 ml pH 7 calibration solution, and one 60 ml pH 10 calibration solution.
$679.10
AUD + GST
$747.01
AUD Inc. GST