Meters
Leica Trace Rod 80 for DA Signal Transmitter
Product code: LG850279
The Trace Rod for Leica DA Signal Transmitter traces the route of non-metallic drains, ducts or pipes. -Use together with the DA Signal Transmitter, DD100 Series Locator or DD200 Series Smart Locator. -Detection range up to 10’. -Detects non-metallic utilities with up to 4” diameter.
$1,450.00
AUD + GST
$1,595.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Leica DA220 1 Watt Signal Transmitter
Product code: LG850272
The Leica DA signal transmitters apply a signal onto underground cables or pipes that may not carry a detectable signal. -Induction mode frequencies of 32.768 (33) kHz / 8.192 (8) kHz. -Robust and easy to use. -IP67 protection.
$1,449.50
AUD + GST
$1,594.45
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
HI70010P pH 10.01 Calibration Buffer Sachets (25 x 20 mL)
Product code: HI70010P
HI70010P is a premium quality pH 10.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. -Color coded label for easy pH buffer value identification. -Accuracy of +/- 0.01 pH at 25°C. -Temperature chart of the actual pH value at various temperatures printed on each sachet.
$59.30
AUD + GST
$65.23
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_green.png?v=059dc5f1)
Marine Alkalinity Checker® HC Reagents (25 Tests)
Product code: HI772-26
The HI772-26 are the replacement reagents for the Marine Alkalinity (dKH) Checker® HC - HI772 and can be used with the Marine Alkalinity Checker® HC - HI755 . These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability. -Pre-made reagents for ease of use -Prepared with high purity chemicals -Marked with expiration date and lot number for traceabilit
$17.60
AUD + GST
$19.36
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Penetration probe PST
Product code: KM-PX22L
Penetration probe PST- white end cap with teflon lead and Lumberg plug.
$159.00
AUD + GST
$174.90
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Aeroqual NMHC Emissions Sensor (0-25ppm)
Product code: SH-VN
Fan-sampling gas sensitive semiconductor (GSS) sensor: 0-25 ppm NMHC.
$649.10
AUD + GST
$714.01
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Lutron Force Gauge Test Stand
Product code: FS-1001
Lutron force gauge test stand for FG-20KG, FG-5005 and FG-5020.
$1,279.40
AUD + GST
$1,407.34
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Larger Heavy Duty Kit Carrying Case (for RWS) - MAXRIK
Product code: MAXRIK
Tramex Heavy Duty Kit Carrying Case with Die Cut Foam for RWS plus one other instrument & some accessories.
$436.363
AUD + GST
$480.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Heavy Duty Kit Carrying Case - MAXMULTI
Product code: MAXMULTI
Tramex Heavy Duty Kit Carrying Case with Die Cut Foam for up to 2 instruments (MEP, CME4, CMEX2, MRH3) and some accessories.
$310.909
AUD + GST
$342.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Larger Heavy Duty Kit Carrying Case (for CMEX5, ME5 & CME5) - MAXMASTER
Product code: MAXMASTER
Tramex Heavy Duty Kit Carrying Case with Die Cut Foam, and larger space for up to 2 instruments (CMEX5, ME5 & CME5) and numerous accessories.
$436.363
AUD + GST
$480.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Heavy Duty Kit Carrying Case (for CMEX5, ME5 & CME5) - MAXINS
Product code: MAXINS
Tramex Heavy Duty Kit Carrying Case with Die Cut Foam for up to 2 instruments (CMEX5, ME5 & CME5) and some accessories.
$310.909
AUD + GST
$342.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex EZ Kit Carrying Case for CMEX5 & PTM2 - ALLBAGP
Product code: ALLBAGP
Tramex EZ Kit Carrying Case with hard shell and zipper for CMEX5 & PTM2. -Can store two of the compatible Tramex meters or one compatible Tramex meter and its accessories.
$74.545
AUD + GST
$82.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex EZ Kit Carrying Case for ME5, CME5, MEP, MRH3, CME4 & CMEX2 - ALLBAG
Product code: ALLBAG
Tramex EZ Kit Carrying Case with hard shell and zipper for ME5, CME5, MEP, MRH3, CME4 & CMEX2. -Can store two of the compatible Tramex meters or one compatible Tramex meter and its accessories.
$74.545
AUD + GST
$82.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Single Meter Case for Dataloggers (DL-RHTA & DL-RHTX) - ALLPOUCH-DLA
Product code: ALLPOUCH-DLA
Tramex Single Meter Case with Hard Shell and Zipper for the DL-RHTA (Feedback Datalogger - Ambient) and DL-RHTX (Feedback Datalogger - Ambient & RH).
$43.636
AUD + GST
$48.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Single Meter Case for PTM2 - ALLPOUCHP
Product code: ALLPOUCHP
Tramex Single Meter Case with Hard Shell and Zipper for PTM2.
$43.636
AUD + GST
$48.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Larger Single Meter Case for CMEX5 - ALLPOUCH5
Product code: ALLPOUCH5
Tramex Single Meter Case with Hard Shell and Zipper for CMEX5.
$43.636
AUD + GST
$48.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Accessory Pack for ME5 - AP-ME
Product code: AP-ME
The Accessory Pack for the Moisture Encounter 5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch for the ME5.
$211.818
AUD + GST
$233.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_green.png?v=059dc5f1)
ASTM F2170 Accessory Pack for CMEX2 & MRH3
Product code: AP-F2170
ASTM F2170 Accessory Pack for CMEX2 & MRH3. Contains 12x reusable Hygro-i2 probes (HIPP12), 1x interface cable (RHIE2), 1x calibration salt check (SAL75), 1x Hygro-i2 Accessory tools (HI-ACC) and 100x 19mm hole liners (RHHL100).
$2,036.363
AUD + GST
$2,240.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
ASTM F2170 Accessory Pack for CMEX5 & DL-RHTX
Product code: AP-F2170B
ASTM F2170 Accessory Pack for CMEX5 & DL-RHTX. -Contains 12x reusable Hygro-i2 probes (HIPP12), 1x interface cable (RHIE2B), 1x calibration salt check (SAL75), 1x Hygro-i2 Accessory tools (HI-ACC) and 100x 19mm hole liners (RHHL100).
$2,077.272
AUD + GST
$2,285.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex Hygro-i2 Tool Accessory Box - HI-ACC
Product code: HI-ACC
The Hygro-i2® Accessory box contains tools needed to perform the ASTM F2170 in-situ RH test. -The toolbox contains: Ruler, Hygro-i2 Insertion & Retrieval Tool, Metal Brush, Hole Liner Insertion Tool and Shears, as well as a spanner for changing pins on the optional pin meter.
$127.272
AUD + GST
$140.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex SMM5 Calibration Check Box - CALBOXSMM5
Product code: CALBOXSMM5
The Tramex SMM5 calibration check box is used for checking readings on the Tramex Skipper 5 Moisutre Meter (SMM5) non-destructive impedance type moisture meters. This process allows the user to verify that the instrument is still performing within tolerances deemed acceptable by Tramex.
$139.09
AUD + GST
$153.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex ME5 Calibration Check Box - CALBOXME5
Product code: CALBOXME5
The Tramex ME5 calibration check box is used for checking readings on the Tramex Moisture Encounter 5 (ME5) non-destructive impedance type moisture meters. This process allows the user to verify that the instrument is still performing within tolerances deemed acceptable by Tramex.
$139.09
AUD + GST
$153.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex Hand-held Wood Pin Probe (for CMEX5) - HH14TP30B
Product code: HH14TP30B
Heavy-duty Pin-type Wood Probe with Cable and TP30 Pins. - Bayonet type plug connection for use with CMEX5.
$295.454
AUD + GST
$325.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Tramex Contact Temperature Probe - CTP
Product code: CTP
The CTP Contact Temperature Probe is a plug-in accessory probe used with the FeedBack Data Loggers to measure and log surface temperature over time. -Used alongside the Humidity sensor functions in the Data Logger, dew point circumstances can be easily identified.
$104.545
AUD + GST
$115.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Short Narrow RH Probe - RHP-SNWB (for CMEX5)
Product code: RHP-SNWB
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$392.727
AUD + GST
$432.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Short Narrow RH Probe - RHP-SNW (for CMEX2 and MRH3)
Product code: RHP-SNW
The Tramex 110mm Short Narrow Wand Relative Humidity Probe for the CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$356.363
AUD + GST
$392.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Narrow Ambient RH Probe - RHP-NWB (for CMEX5)
Product code: RHP-NWB
The Tramex 260mm Narrow Wand Relative Humidity Probe with bayonet connection for the CMEX5 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$490.909
AUD + GST
$540.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Narrow Ambient RH Probe - RHP-NW (for CMEX2 and MRH3)
Product code: RHP-NW
The Tramex 260mm Narrow Wand Relative Humidity Probe for CMEX2 and MRH3 has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope.
$454.545
AUD + GST
$500.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Replacement Flat sensor for pH60F (Originally PH5FC)
Product code: PH60-E3
Replacement Flat sensor for pH60F (Originally PH5FC).
$113.00
AUD + GST
$124.30
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
DO8032 Luminescent Sensor Cap for Apera Optical DO Probe
Product code: IC-DO8032
The DO8032 Luminescent Sensor Cap is an essential part for Apera Optical DO Probe (DO803 and DO810). -This cap has a service life of 8000 hours.
$379.90
AUD + GST
$417.89
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)