Meters
Micro ToupH electrode (for low-volume samples) - IC-9418-10C
Product code: IC-9418-10C
This glass-body, refillable pH electrode can measure samples as low as 50 uL.
$579.40
AUD + GST
$637.34
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
$27.00
AUD + GST
$29.70
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Metallic ORP electrode 9300-10D
Product code: 9300-10D
Uses a flat type metallic electrode, which allows a small amount of sample to be measured.
$469.60
AUD + GST
$516.56
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Measurement Probe - IC-M511G
Product code: IC-M511G
Measuring probe for contact measurements for MAVO-SPOT 2 USB
$563.00
AUD + GST
$619.30
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
MB 35 active electrode - IC-3770
Product code: IC-3770
The active electrode MB 35 is a special probe designed for the field of structural moisture. The electrode is applicable for the Hydromettes M 4050, RTU 600, HB 30, UNI 1 and UNI 2.
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Free Chlorine CAL Check Standards
Product code: IC-HI97701-11
The HI97701-11 Free Chlorine Cal Check standards provides a simple solution to calibrating and validating the compatible free chlorine portable photometers that have a 0.00 to 5.00 mg/L (ppm) range. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. -Pre-dosed reagents for ease of use. -Supplied with certificate of quality. -Marked with expiration date and lot number for traceability.
$319.50
AUD + GST
$351.45
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Replacement Vane for Mini Environmental Quality Meters
Product code: IC-850025V
Replacement vane for Sper Mini Environmental Quality Meters. For Sper Scientific 850025, 850026 and 850027
$79.20
AUD + GST
$87.12
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_green.png?v=059dc5f1)
Additional Sensor Pack for Mains power Monitor with USB Interface
Product code: MS-6166
Extra sensors for MS-6165/67 for 3-phase systems.
$92.857
AUD + GST
$102.14
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
7150A Test Leads Set with Remote Switch
Product code: 7150A
7150A test leads set with remote switch. Line 1,000mm / Earth 1,550mm.
$219.80
AUD + GST
$241.78
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Magnesium Ion (Mg2+) Electrode for IMACIMUS Nutrient Analyzer - IC-MA24
Product code: IC-MA24
Magnesium Ion (Mg2+) Electrode for IMACIMUS Nutrient Analyzer.
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
M 6 stick-in electrode pairs - IC-3700
Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$110.00
AUD + GST
$121.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
M 25-100 brush electrode pair - IC-3740
Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$160.00
AUD + GST
$176.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
M 20 drive-in electrode - IC-3300
Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$100.00
AUD + GST
$110.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
M 18 ram-in electrode - IC-3500
Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$320.909
AUD + GST
$353.00
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Lux probe (digital) - for measuring illuminance, wired
Product code: IC-0635-0551
For measurements in workplaces, for example in offices or in production areas: use the lux probe (with the compatible measuring instrument) to measure illuminance.
$809.60
AUD + GST
$890.56
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Luminance Attachment with 10 mm diffusor - IC-M516G
Product code: IC-M516G
Luminance attachment with 10 mm diffusor for MAVOLUX 5032 B USB and MAVOLUX 5032 C USB. Available in 10 and 20 mm.
$364.00
AUD + GST
$400.40
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
$24.00
AUD + GST
$26.40
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
LT III-Battery Pack (Single) - IC-R161058
Product code: IC-R161058
LT III-Battery Pack. Also compatible with LanTEK II
$409.10
AUD + GST
$450.01
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Long ToupH glass body electrode 9680S-10D
Product code: 9680S-10D
Recommended for measuring samples such as microbe culture fluids in test tubes. Electrode can be used for all pH Meters of the 20, 50 & 70 Series.
$529.10
AUD + GST
$582.01
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Light Tower, R-Y-G, IP65, 24VDC for OHaus Bench scales
Product code: IC-30424021
Alarm Beacon Kit 3 Colors 243mm OHAUS Bench scales.
$340.73
AUD + GST
$374.80
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
LEEB Hardness calibration block - IC-LHT-Test
Product code: IC-LHT-Test
The LHT-Test Block is a hardness reference block for the calibration of portable hardness testers.
$299.50
AUD + GST
$329.45
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Sper Scientific Pt 1000 Temperature Probe
Product code: IC-850027P
Pt 1000 Temperature Probe for use with Mini Environmental Meter 850027.Sper Scientific platinum resistance thermometer (PT1000) offers excellent accuracy over a wide temperature range (-10 to 70.0 C). Pt 1000 thermometers are also referred to as RTD thermometers.
$89.90
AUD + GST
$98.89
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
testo Smart Case (Climate) - storage case for Smart Probes measuring instruments
Product code: IC-0516-0260
Robust on the outside, soft on the inside: the testo Smart Case “VAC” with a hard outer shell and integrated foam insert with compartments for a precise fit. You can use it to safely store and transport your Smart Probes testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i measuring instruments.
$69.00
AUD + GST
$75.90
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
LanTEK III Cat. 6A RJ45 Permanent Link Adapter (Single) - IC-R161051
Product code: IC-R161051
LT III-CAT6A RJ45 Permanent Link Adaptor (Single)
$1,139.90
AUD + GST
$1,253.89
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
LanTEK III Cat. 6A PLA Replacement Tips (Pair) -IC-R161050
Product code: IC-R161050
LT III-CAT6A PLA Replacement Tips (Pair)
$149.70
AUD + GST
$164.67
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
KS-PH-SENSOR-S Sensor
Product code: KS-PH-SENSOR-S
Replacement sensor for KS-PH-30S-E,suitable for measuring the pH of liquids.
$59.00
AUD + GST
$64.90
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
KS-PH-SENSOR-FT Sensor
Product code: KS-PH-SENSOR-FT
Replacement sensor for KS-PH-30S-E, suitable for measuring the pH of semisolids.
$59.00
AUD + GST
$64.90
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
KS-PHSCAN-LT Sensor
Product code: KS-PH-SENSOR-LT
Replacement sensor for KS-PH-30S-E, suitable for measuring the small volume samples.
$45.00
AUD + GST
$49.50
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
Kyoritsu 7256 Output Cord - Clamp Meters
Product code: 7256
Kyoritsu 7256 Output cord - clamp meters.
$41.00
AUD + GST
$45.10
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)
$129.70
AUD + GST
$142.67
AUD Inc. GST
![in stock icon](/bundles/ictheme/themes/basetheme/images/icon_stock_empty.png?v=059dc5f1)