Meters
SCM4 Carbon Monoxide Detector
Product code: SCM4
The SCM4 carbon monoxide (CO) detector measures CO in parts per million (ppm) and has a fast measurement time for walk-around testing. -Measures 0 to 1000 ppm CO. -Responds to changes CO levels in real-time. -Includes a pre-calibrated and replaceable sensor.
$469.20
AUD + GST
$516.12
AUD Inc. GST
SC680INT : Trms AC/DC Amp Clamp Meter with Power Function
Product code: SC680INT
Wireless clamp meter with Power function designed to work with Fieldpiece's Job Link system for HVAC-R measurements. -Feature AC/DC clamp. -With Low Pass Filter for VFD systems. -Includes Molex test leads for small circuitry.
$679.90
AUD + GST
$747.89
AUD Inc. GST
SC640 TRMS Clamp Meter with Swivel AAC Clamp Head
Product code: SC640
Dual display clamp meter with 400AAC swivel-head clamp designed for HVACR professionals. -Includes safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV). -Extended temperature tolerances that allow for testing in freezers and on hot rooftop.
$489.60
AUD + GST
$538.56
AUD Inc. GST
SC480INT Trms Power Clamp Meter
Product code: SC480INT
TRMS CAT1V clamp meter with power [kw] range for Electricians & HVAC-R service. - Verify 3-phase rotation with just two leads. - Takes more accurate VAC and AAC readings with True RMS. -Communicates with Fieldpiece's Job Link system.
$589.90
AUD + GST
$648.89
AUD Inc. GST
SC440 TRMS Dual Display Clamp Meter
Product code: SC440
Auto or manual ranging clamp meter with dual-display that shows voltage and amperage readings at the same time. -Includes the electrical ranges Technicians use for most HVAC-R work, plus temperature, capacitance and duty cycle. -Also has several safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV).
$429.80
AUD + GST
$472.78
AUD Inc. GST
JL3MN Job Link System Manometer
Product code: JL3MN
Wireless manometer designed to work with Fieldpiece's Job Link system. -Measures in inWC, mmWC, mbar, psi and Pa. -1,000’ Wireless range. -Has a strong magnet that allows you to place the manometer directly on a test port.
$229.80
AUD + GST
$252.78
AUD Inc. GST
Portable Suspended Solids meter and Low range sensor
Product code: IC-IIG-IPSL-20
Portable Suspended Solids meter and Low range sensor package. Includes Insitel IIG IPM Portable Meter and IIG PSSL-20 Portable Suspend Solids Sensor. -Measurement range of 0 to 1500 mg/l total suspended solids. -The portable meter and datalogger that accepts most standard DO,SS, pH or ORP sensors and and will automatically configure itself for the correct operation.
$4,899.00
AUD + GST
$5,388.90
AUD Inc. GST
ULTRAPENx2 Pocket Nitrate/Temperature with Bluetooth
Product code: ML-PTBT6
Waterproof Nitrate/tempera ture pocket tester with Bluetooth -Nitrate Concentration (ppm N or ppm NO3-) or mV. -Built-in Double Junction Reference Electrode. -Compatible with EPA Approved Standard Method 4500-NO3-D
$1,369.60
AUD + GST
$1,506.56
AUD Inc. GST
ULTRAPENx2 Pocket Dissolved Oxygen/Temperature with Bluetooth
Product code: ML-PTBT5
Waterproof Free Chlorine Equivalent(FCE)/tempera ture pocket tester with Bluetooth. -Display DO in Concentration, % Saturation, or Both. -Three Calibration Methods: Air, Water and 0 ppm DO. -Measurement Storage with time, date and location and can be exported via email.
$1,119.70
AUD + GST
$1,231.67
AUD Inc. GST
ULTRAPENx2 Pocket Chlorine/Temperature with Bluetooth
Product code: ML-PTBT4
Waterproof Free Chlorine Equivalent(FCE)/tempera ture pocket tester with Bluetooth. -Accuracy of up to ±0.3 ppm FCE -Measurement Storage with time, date and location and can be exported via email. -Rugged design with aircraft aluminum body with epoxy encapsulated electronics.
$969.50
AUD + GST
$1,066.45
AUD Inc. GST
ULTRAPENx2 Pocket ORP/Temperature with Bluetooth
Product code: ML-PTBT3
Waterproof ORP/tempera ture pocket tester with Bluetooth. -Accuracy of ±10 mV ORP. -3 Calibration options with Automatic Solution Recognition and Automatic Temperature Compensation. -99.9% Pure Platinum Electrode.
$839.80
AUD + GST
$923.78
AUD Inc. GST
ULTRAPENx2 Pocket pH/Temperature with Bluetooth
Product code: ML-PTBT2
Waterproof pH/tempera ture pocket tester with Bluetooth. -Accuracy of ±0.01 pH. -1, 2 and 3 Point Calibration with Automatic Temperature Compensation. -Measurement Storage with time, date and location and can be exported via email. -Rugged design with aircraft aluminum body with epoxy encapsulated electronics.
$769.30
AUD + GST
$846.23
AUD Inc. GST
ULTRAPENx2 Pocket Conductivity/TDS/Salinity/Temperature with Bluetooth
Product code: ML-PTBT1
Waterproof conductivity/TDS/salinity/tempera ture pocket tester with Bluetooth. -Accuracy of ±1% of reading, ±0.2% at calibration point. - Auto ranging to select measurement range. -Measurement Storage with time, date and location and can be exported via email. -Rugged design with aircraft aluminum body with epoxy encapsulated electronics.
$779.50
AUD + GST
$857.45
AUD Inc. GST
Copper Low-Range Checker® HC
Product code: IC-HI747
The Hanna copper low-range (0 to 999 ppb) Checker® provides the accuracy of professional instrumentation at the affordable price of a chemical test kit. -Easier to use and more accurate than chemical test kits. -Dedicated to a single parameter. -Compact, Portable Design.
$119.80
AUD + GST
$131.78
AUD Inc. GST
Color of Water Checker® HC
Product code: IC-HI727
The Hanna Color of Water Checker® is an affordable alternative to professional instrumentation for measuring the color of drinking water. The Hanna Color of Water Checker® uses a fixed wavelength LED and silicon photo detector to provide similar accuracy of professional instrumentation. -Compact, Portable Design. -One-button operation.
$109.10
AUD + GST
$120.01
AUD Inc. GST
Chromium VI Low-Range Checker® HC
Product code: IC-HI749
The Hanna chromium VI low-range (0 to 300 ppb) Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit. -Compact, Portable Design. -Built-in Timer. -One-button operation.
$109.40
AUD + GST
$120.34
AUD Inc. GST
Chromium VI High-Range Checker® HC
Product code: IC-HI723
The Hanna chromium VI high-range (0 to 999 ppb) Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit. -Compact, Portable Design. -Built-in Timer. -One-button operation.
$109.00
AUD + GST
$119.90
AUD Inc. GST
Calcium Hardness Checker® HC
Product code: IC-HI720
The Hanna calcium hardness (0.00 to 2.70 ppm) Checker® provides the accuracy of professional instrumentation at the affordable price of a chemical test kit. -Easier to use and more accurate than chemical test kits. -Dedicated to a single parameter. -Compact, Portable Design.
$119.60
AUD + GST
$131.56
AUD Inc. GST
Ammonia Medium-Range Checker® HC
Product code: IC-HI715
The Hanna ammonia medium-range (0.00 to 9.99 ppm) Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit. -Compact, Portable Design. -Built-in Timer. -One-button operation.
$109.80
AUD + GST
$120.78
AUD Inc. GST
Ammonia Low-Range Checker® HC
Product code: IC-HI700
The Hanna ammonia medium-range (0.00 to 9.99 ppm) Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit. -Compact, Portable Design. -Built-in Timer. -One-button operation.
$109.00
AUD + GST
$119.90
AUD Inc. GST
Fruit Penetrometer for Cherries, Strawberries, Grapes, and Blueberries
Product code: FT-02
The FT series Fruit Penetrometer measures the penetration and squashing of fruit pulp using an indenter tip of specific dimension, to give one of the most accurate tests available, with the resulting pressure being measured in pounds and kilograms. -For cherries, strawberries, grapes, blueberries and other small fruits.
$509.80
AUD + GST
$560.78
AUD Inc. GST
Extech CO210: Desktop Indoor Air Quality CO2 - CO210
Product code: CO210
CO210 is a Desktop Indoor Air Quality CO2 Monitor/Datalogger. -Features Minimum/Maximum CO2 value recall, year/month/date/time display, and an Automatic Baseline Calibration (minimum CO2 level over 7.5 days) or manual calibration in fresh air. -Measurement ranges are 0 to 9,999 ppm (CO2), 14 to 140°F (-10 to 60°C) for Air Temperature and 0.1 to 99.9% for Relative Humidity.
$639.80
AUD + GST
$703.78
AUD Inc. GST
Tramex Roofing Master Kit - RMK
Product code: RMK
Master kit centered on a non destructive flat roof scanner for leak detection, tracing and moisture measuring and surveying with accompanying Bluetooth app. Includes: - The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex Roof Master Kit is used to perform ASTM D7954. - The Dec Scanner and the RWS Roof & Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing.
$15,690.909
AUD + GST
$17,260.00
AUD Inc. GST
Tramex Roofing Inspector Kit - RIK
Product code: RIK
Non destructive flat roof scanner for leak detection, tracing and moisture measuring and surveying with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex RWS Roof & Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. -Hand held electrode with 200mm insulated pins and 260mm narrow RH probe.
$4,890.909
AUD + GST
$5,380.00
AUD Inc. GST
Tramex Building Survey Master Kit - BSMK5.1
Product code: BSMK5.1
Ultimate moisture meter kit for moisture and humidity surveying of buildings and building materials. Includes: -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex RWS Roof & Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. -An Ambient Relative Humidity Hygro-i2 Short Probe and a heavy-duty pin-type wood probe.
$4,590.909
AUD + GST
$5,050.00
AUD Inc. GST
Tramex Building Survey Inspection EZ Kit - BSIZK5.1
Product code: BSIZK5.1
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -Ambient Relative Humidity Hygro-i2 Short Probe.
$1,754.545
AUD + GST
$1,930.00
AUD Inc. GST
Tramex Concrete Coatings Inspector Tramex Concrete Coatings Inspector Kit - CCIKKit - CCIK
Product code: CCIK
Complete moisture meter kit for measuring moisture content and dew-point of concrete floors and slabs for coatings application with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Tramex CMEX5 built-in hygrometer.
$1,740.909
AUD + GST
$1,915.00
AUD Inc. GST
Tramex Concrete Coatings Installer Tech Kit - CCTK
Product code: CCTK
Compact Moisture Meter Kit For Measuring Moisture Content And Dew-point Of Concrete Floors And Slabs For Coatings Application with accompanying Bluetooth app. Includes: -The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content per ASTMF2659. -THe Tramex Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe. -The Tramex Contact Temperature Probe provides temperature readings of the floor surface.
$1,431.818
AUD + GST
$1,575.00
AUD Inc. GST
Tramex Flooring Installer Tech Kit - FTK
Product code: FTK
Compact moisture meter kit for measuring moisture content and dew-point of concrete floors and slabs for flooring installation with accompanying Bluetooth app. Includes: -The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content per ASTMF2659. -The Tramex Ambient Feedback Datalogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in The environment.
$1,486.363
AUD + GST
$1,635.00
AUD Inc. GST
SD800: CO2, Humidity and Temperature Datalogger
Product code: SD800
SD800 monitors air quality in schools, office buildings, greenhouses, hospitals and anywhere that high levels of carbon dioxide are generated. -Selectable data sampling rate of 5, 10, 30, 60, 120, 300, 600 seconds or automatic. -Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor. -Triple LCD simultaneously displays CO2, Temperature and Relative Humidity.
$889.10
AUD + GST
$978.01
AUD Inc. GST