Meters
COMET T7610 Web Sensor with PoE - Remote Thermometer, Hygrometer, Barometer with Ethernet Interface
Product code: IC-T7610
The COMET T7610 is an ambient temperature, relative humidity, atmospheric pressure transmitter with Power over Ethernet (PoE) web sensors.
$1,280.56
AUD + GST
$1,408.62
AUD Inc. GST
COMET T7510 WebSensor Remote Thermometer, Hygrometer and Barometer with Ethernet Interface
Product code: IC-T7510
The COMET T7510 is an ambient temperature, relative humidity, atmospheric transmitter with web sensor and remote alarm. Display reading and pressure output is user selectable in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.
$1,163.89
AUD + GST
$1,280.28
AUD Inc. GST
COMET T7410 Industrial Temperature, Humidity, Barometric Pressure Transmitter
Product code: IC-T7410
The COMET T7410 is an ambient temperature, humidity and atmospheric pressure transmitter. Suitable for indoor and outdoor use. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.
$1,027.78
AUD + GST
$1,130.56
AUD Inc. GST
COMET T2514 WebSensor Remote Barometer with Ethernet Interface
Product code: IC-T2514
The COMET T2514 is an atmospheric pressure transmitter with t-line web sensor and remote alarm. Display reading and pressure output is user selectable in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.
$875.00
AUD + GST
$962.50
AUD Inc. GST
COMET T2214 Barometric Pressure Transmitter 0-10V output
Product code: IC-T2214
The COMET T2214 is an atmospheric pressure transmitter with 0-10V output. Suitable for outdoor or indoor use. Display reading and pressure output is user selectable in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.
$625.00
AUD + GST
$687.50
AUD Inc. GST
COMET T2114 Barometric Pressure Transmitter 4-20mA output
Product code: IC-T2114
The COMET T2114 is an atmospheric pressure transmitter with 4-20mA output. Suitable for outdoor or indoor use. Display reading and pressure output is user selectable in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.
$625.00
AUD + GST
$687.50
AUD Inc. GST
6069-10C pH Electrodes (Test Tubes)
Product code: 6069-10C
The 6069-10C is a slender pH electrode specifically for measuring samples in thin test tubes (eg. NMR test tubes).
$669.90
AUD + GST
$736.89
AUD Inc. GST
Color LED Light Meter - LT45
Product code: LT45
Extech's LT45 LED Light meters are used for monitoring and optimizing environmental light levels in buildings, schools, and offices. - Store/recall up to 99 readings - Lux or Foot-Candle (Fc) units - Measures White, Red, Yellow, Green, Blue, and Purple LED
$619.90
AUD + GST
$681.89
AUD Inc. GST
Classic Fluorometer, Wireless Benchtop - IC-3004
Product code: IC-3004
The Classic Benchtop Wireless fluorometer is designed for use on a flat surface, and can also be used in the field. The water resistant sensor design enables convenient measurement of wet material including aquatic plants, algae and wet leaves. This model includes a sensor with flat base for benchtop work, a radio link connects the interface box and sensor to a PC up to 500 m.
Classic Fluorometer, Wireless Base entry, 50 m - IC-3006
Product code: IC-3006
The Classic Fluorometer, Wireless Standard 50m is designed for ease of handling, with the cable extending from the base of the sensor. The sensor is waterproof to 50m/164ft depth. In this model, the cable enters base of sensor for process applications. A radio link connects the interface box and sensor to PC up to 500 m.
Classic Fluorometer, USB Benchtop - IC-3001
Product code: IC-3001
The Classic Fluorometer USB Benchtop is designed for use on a flat surface, and can also be used in the field. The water resistant design enables convenient measurement of wet material including aquatic plants, algae and wet leaves. This model includes a sensor with flat base for benchtop work.
Classic Fluorometer, USB Base Entry, 50 m - IC-3003
Product code: IC-3003
The Classic Fluorometer USB Standard 50m is designed for ease of handling, with the cable extending from the base of the sensor. The sensor is waterproof to 50m/164ft depth. In this model, the cable enters base of sensor for process applications.
Classic Fluorometer Sensor, SDI-12 - IC-1006
Product code: IC-1006
The SDI-12 connection enables the standard Aquation Fluorescence Sensor to be connected to industrial or process systems such as greenhouses or phenotyping facilities, or any controller/datalogger system that communicates with the SDI-12 protocol
Classic Fluorometer Sensor, Ethernet - IC-1010
Product code: IC-1010
The ethernet connection enables the standard Aquation Fluorescence Sensor to be connected to systems and terminals that communicates with the ethernet protocol
Class 2 Risk Assessment/ Environmental System - IC-NK002D
Product code: IC-NK002D
The Class 2 Risk Assessment/ Environmental System kit is based around the GA6226 industrial sound level meter and data logger, ideal for environmental monitoring and risk assessment. Can measure and monitor rom 27dB to 130dB. Includes calibrator, barometer, software and carrying case.
$4,849.10
AUD + GST
$5,334.01
AUD Inc. GST
Class 2 Meter With Calibrator, Windshield & Carry Case
Product code: GA216L-K
The simple data logging package for running and analysing noise assessments and checking noise levels. Kit comes with Class 2 sound meter for workplace safety and environmental noise checks and calibrator in a case.
$2,519.20
AUD + GST
$2,771.12
AUD Inc. GST
Class 1 Risk Assessment/ Environmental System - IC-NK002C
Product code: IC-NK002C
The Class 1 Risk Assessment/ Environmental System kit is based around the GA6224 industrial sound level meter and data logger, ideal for environmental monitoring and risk assessment. Can measure and monitor rom 27dB to 130dB. Includes calibrator, barometer, software and carrying case.
$5,499.60
AUD + GST
$6,049.56
AUD Inc. GST
Class 1 Integrating Sound Level Meter
Product code: IC-ST-106
Class 1 Integrating Sound Meter for environmental and work place noise monitoring.
$2,559.40
AUD + GST
$2,815.34
AUD Inc. GST
CHY805 RTD Thermometer with RTD probe - CHY805-Kit
Product code: CHY805-Kit
A single input, high accuracy, digital thermometer with RTD input. Ideal as a NATA Calibrated Reference thermometer. This kit comes with the RTD Probe.
Chlorophyll Concentration Meter Ccm-200 Plus
Product code: IC-CCM-200
Chlorophyll Concentration Meter CCM-200 plus
Chlorine Dioxide Portable Photometer with CAL Check - IC-HI97738
Product code: IC-HI97738
HI97738 is an advanced portable photometer for the measurement of chlorine dioxide in water. This meter offers a superior optical system that utilizes a reference detector and narrow band interference filters for extremely fast and repeatable measurements. - No warm up time before taking a measurement - Tutorial mode for step-by-step instructions - CAL Check to verify meter performance
$479.40
AUD + GST
$527.34
AUD Inc. GST
Checktemp Dip Digital Thermometer - IC-HI98539
Product code: IC-HI98539
The Checktemp Dip Digital Thermometer is a high-accuracy thermometer connected to a weighted, stainless steel probe by a 3 m flexible, silicone cable. The probe incorporates an NTC thermistor sensor, providing an extremely accurate temperature measurement that can satisfy your HACCP requirements.
$159.50
AUD + GST
$175.45
AUD Inc. GST
Checktemp 4 Celsius Folding Thermometer - IC-HI151-00
Product code: IC-HI151-00
The HI151 Checktemp 4 is a folding digital thermometer with stainless steel penetration probe. It offers an ergonomic design and delivers high accuracy measurements over a wide temperature range.
$109.76
AUD + GST
$120.74
AUD Inc. GST
Checker Plus pH Tester - IC-HI98100
Product code: IC-HI98100
The HI98100 Checker Plus pH tester offers automatic calibration to one or two points, automatic buffer recognition, calibrated buffer tags, stability indicator, low battery indicator, and selectable automatic shut off. The Checker plus still maintains the iconic pentagon design with a probe that measures 103 mm in length and tapered to a 8 mm diameter making it ideal for test tubes and vials.
$99.90
AUD + GST
$109.89
AUD Inc. GST
2000g x 1 g ADAM Dune DCT Portable Compact Balance
Product code: IC-DCT-2000
With simple, three-button operation and sturdy plastic construction, the portable Dune compact balance is a smart choice for labs, schools, kitchens, offices, or veterinary facilities. It quickly delivers precision readings on a large display, so results are easy to read. Weight capacity of 2000g x 1g with a 145x145 mm diameter pan size. Colour-coded keys facilitate quick recognition of the most frequently used buttons. Large pan removes easily for speedy cleaning.
$136.00
AUD + GST
$149.60
AUD Inc. GST
50g (0.001g / 0.01%) ADAM PMB Moisture Analyser
Product code: IC-PMB-53
With simple operation and rapid response time, the PMB offers top value in moisture analysis. USB and RS-232 interfaces facilitate connectivity, whilst a second USB port allows storage of test programs and data on flash drives. 50g (0.001g / 0.01%) capacity. USB host for memory card, USB I/O and RS-232 interfaces. Four preset drying methods allow test routines for a wide variety of samples. Pan lifter allows easy placement and removal of samples.
$3,175.00
AUD + GST
$3,492.50
AUD Inc. GST
160g (0.001g / 0.01%) ADAM PMB Moisture Analyser
Product code: IC-PMB-163
With simple operation and rapid response time, the PMB offers top value in moisture analysis. USB and RS-232 interfaces facilitate connectivity, whilst a second USB port allows storage of test programs and data on flash drives. 160g (0.001g / 0.01%) capacity. USB host for memory card, USB I/O and RS-232 interfaces. Four preset drying methods allow test routines for a wide variety of samples. Pan lifter allows easy placement and removal of samples.
$3,865.00
AUD + GST
$4,251.50
AUD Inc. GST
3kg x 0.5g ADAM Latitude LBX Compact Bench Scale
Product code: IC-LBX-3
With simple operation and a variety of modes, our robust, dependable Latitude compact bench scales deliver excellent value for quick, basic weighing and counting needs, perfect for production, warehouse, or field use. Weight capacity of 3kg x 0.5g with a 245x180mm diameter pan size. Can be powered through AC adapter or through the internal rechargeable battery with a battery life of up to 240 hours. Checkweighing LEDs show under, over or within limits.
$395.00
AUD + GST
$434.50
AUD Inc. GST
Cdi5450 Hot Tap Flowmeter For Steel Pipes (6")
Product code: IC-5450-60S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
$5,749.30
AUD + GST
$6,324.23
AUD Inc. GST
Cdi5400 Flow Meter For Steel Pipes (8")
Product code: IC-5400-80S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$5,479.80
AUD + GST
$6,027.78
AUD Inc. GST