Meters
Measurement Probe - IC-M511G
Product code: IC-M511G
Measuring probe for contact measurements for MAVO-SPOT 2 USB
$563.00
AUD + GST
$619.30
AUD Inc. GST
MB 35 active electrode - IC-3770
Product code: IC-3770
The active electrode MB 35 is a special probe designed for the field of structural moisture. The electrode is applicable for the Hydromettes M 4050, RTU 600, HB 30, UNI 1 and UNI 2.
Free Chlorine CAL Check Standards
Product code: IC-HI97701-11
The HI97701-11 Free Chlorine Cal Check standards provides a simple solution to calibrating and validating the compatible free chlorine portable photometers that have a 0.00 to 5.00 mg/L (ppm) range. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. -Pre-dosed reagents for ease of use. -Supplied with certificate of quality. -Marked with expiration date and lot number for traceability.
$319.50
AUD + GST
$351.45
AUD Inc. GST
Replacement Vane for Mini Environmental Quality Meters
Product code: IC-850025V
Replacement vane for Sper Mini Environmental Quality Meters. For Sper Scientific 850025, 850026 and 850027
$79.20
AUD + GST
$87.12
AUD Inc. GST
1 in stock
Additional Sensor Pack for Mains power Monitor with USB Interface
Product code: MS-6166
Extra sensors for MS-6165/67 for 3-phase systems.
$92.857
AUD + GST
$102.14
AUD Inc. GST
7150A Test Leads Set with Remote Switch
Product code: 7150A
7150A test leads set with remote switch. Line 1,000mm / Earth 1,550mm.
$219.80
AUD + GST
$241.78
AUD Inc. GST
Magnesium Ion (Mg2+) Electrode for IMACIMUS Nutrient Analyzer - IC-MA24
Product code: IC-MA24
Magnesium Ion (Mg2+) Electrode for IMACIMUS Nutrient Analyzer.
M 6 stick-in electrode pairs - IC-3700
Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$110.00
AUD + GST
$121.00
AUD Inc. GST
M 25-100 brush electrode pair - IC-3740
Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$160.00
AUD + GST
$176.00
AUD Inc. GST
M 20 drive-in electrode - IC-3300
Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$100.00
AUD + GST
$110.00
AUD Inc. GST
M 18 ram-in electrode - IC-3500
Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$320.909
AUD + GST
$353.00
AUD Inc. GST
Lux probe (digital) - for measuring illuminance, wired
Product code: IC-0635-0551
For measurements in workplaces, for example in offices or in production areas: use the lux probe (with the compatible measuring instrument) to measure illuminance.
$809.60
AUD + GST
$890.56
AUD Inc. GST
$24.00
AUD + GST
$26.40
AUD Inc. GST
LT III-Battery Pack (Single) - IC-R161058
Product code: IC-R161058
LT III-Battery Pack. Also compatible with LanTEK II
$409.10
AUD + GST
$450.01
AUD Inc. GST
Long ToupH glass body electrode 9680S-10D
Product code: 9680S-10D
Recommended for measuring samples such as microbe culture fluids in test tubes. Electrode can be used for all pH Meters of the 20, 50 & 70 Series.
$529.10
AUD + GST
$582.01
AUD Inc. GST
Light Tower, R-Y-G, IP65, 24VDC for OHaus Bench scales
Product code: IC-30424021
Alarm Beacon Kit 3 Colors 243mm OHAUS Bench scales.
$340.73
AUD + GST
$374.80
AUD Inc. GST
LEEB Hardness calibration block - IC-LHT-Test
Product code: IC-LHT-Test
The LHT-Test Block is a hardness reference block for the calibration of portable hardness testers.
$299.50
AUD + GST
$329.45
AUD Inc. GST
testo Smart Case (Climate) - storage case for Smart Probes measuring instruments
Product code: IC-0516-0260
Robust on the outside, soft on the inside: the testo Smart Case “VAC” with a hard outer shell and integrated foam insert with compartments for a precise fit. You can use it to safely store and transport your Smart Probes testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i measuring instruments.
$69.00
AUD + GST
$75.90
AUD Inc. GST
LanTEK III Cat. 6A RJ45 Permanent Link Adapter (Single) - IC-R161051
Product code: IC-R161051
LT III-CAT6A RJ45 Permanent Link Adaptor (Single)
$1,139.90
AUD + GST
$1,253.89
AUD Inc. GST
LanTEK III Cat. 6A PLA Replacement Tips (Pair) -IC-R161050
Product code: IC-R161050
LT III-CAT6A PLA Replacement Tips (Pair)
$149.70
AUD + GST
$164.67
AUD Inc. GST
KS-PH-SENSOR-S Sensor
Product code: KS-PH-SENSOR-S
Replacement sensor for KS-PH-30S-E,suitable for measuring the pH of liquids.
$59.00
AUD + GST
$64.90
AUD Inc. GST
KS-PH-SENSOR-FT Sensor
Product code: KS-PH-SENSOR-FT
Replacement sensor for KS-PH-30S-E, suitable for measuring the pH of semisolids.
$59.00
AUD + GST
$64.90
AUD Inc. GST
KS-PHSCAN-LT Sensor
Product code: KS-PH-SENSOR-LT
Replacement sensor for KS-PH-30S-E, suitable for measuring the small volume samples.
$45.00
AUD + GST
$49.50
AUD Inc. GST
Kyoritsu 7256 Output Cord - Clamp Meters
Product code: 7256
Kyoritsu 7256 Output cord - clamp meters.
$41.00
AUD + GST
$45.10
AUD Inc. GST
$129.70
AUD + GST
$142.67
AUD Inc. GST
Jenco Instruments IC-618P Replacement electrode for 618N
Product code: IC-618P
Jenco 618P 3-in-1 pH/ATC electrode, Original Compact Style, 60 degrees, Application: pH/Temperature measurement, single junction(618)
$109.90
AUD + GST
$120.89
AUD Inc. GST
$19.50
AUD + GST
$21.45
AUD Inc. GST
IR 40 BL active electrode - IC-3150
Product code: IC-3150
The IR 40 BL active electrode is used together with the BL UNI 10 to make surface temperature readings through contactless infrared technology.
$25.41
AUD + GST
$27.95
AUD Inc. GST
$32.34
AUD + GST
$35.57
AUD Inc. GST