Meters
NAVITEK NT PLUS - IC-R151005
Product code: IC-R151005
The new NaviTEK NT Plus is a network tester for troubleshooting and maintenance of active and passive copper networks with touch screen. Has an autotest button that performs a suite of network tests (Ping, DNS, Gateway, Traceroute). Network Probe provides detailed port and network information of each device. Internal memory for 5000 test reports.
$2,259.00
AUD + GST
$2,484.90
AUD Inc. GST
NAVITEK NT Pro Bundle - IC-NTEK-KIT
Product code: IC-NTEK-KIT
This bundle includes the NaviTEK NT Pro for troubleshooting and maintenance of active and passive copper and fiber networks. It includes active remotes and amplifier probe. The NaviTEK NT Pro performs tests for copper cablings and networks with a fiber optic cable interface. Provides PoE/PoE+ detection with load test. Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan.
$2,999.40
AUD + GST
$3,299.34
AUD Inc. GST
R164061 FiberTEK III LC Adapter Kit - IC-R164061
Product code: IC-R164061
The multimode R164061 accessory kits allow one-jumper calibration when testing cabling systems with LC connectors. The kits utilize a precision LC adapter for the receive (Rx) port of each FiberTEK III module and a SC-LC test cord for the transmit (Tx) port. One-jumper calibration recommended by most standards for field testing. Procedure is the same for MM and SM testing.
$12,569.90
AUD + GST
$13,826.89
AUD Inc. GST
FiberTEK IV-MM LED and SM Laser Kit - IC-R164010
Product code: IC-R164010
FiberTEK IV combination MM/SM kit with LED MM sources and laser SM sources. FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing. Flashes red to warn of light from other sources, green when linked to FiberTEK IV. Red laser light source to visually pinpoint faults and locate fiber ports. Supports all common connector types. Compatible with all LanTEK IV models.
$18,299.50
AUD + GST
$20,129.45
AUD Inc. GST
LanTEK IV-S 3000MHz Cable Certifier (With PL/CL Adapters) - IC-R163009
Product code: IC-R163009
The LanTEK IV-S R163009 is a 3000MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$18,299.30
AUD + GST
$20,129.23
AUD Inc. GST
LanTEK IV-S 500MHz Cable Certifier (With PL/CL Adapters) - IC-R163008
Product code: IC-R163008
The LanTEK IV-S R163008 is a 500MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$16,559.80
AUD + GST
$18,215.78
AUD Inc. GST
EL-WEM+ WiFi CO2 and Indoor Air Quality Monitor - IC-EL-WEM-PLUS
Product code: IC-EL-WEM-PLUS
The EL-WEM+ CO2 and Indoor Air Quality (IAQ) monitors indoor CO2 levels, temperature, humidity, VOCs, pressure, PM1, PM2.5 and PM10 to help you monitor indoor air quality. Measures all parameters in real-time, rating them according to five levels (Excellent to Inadequate). Visual and audible alarms and SMS alerts, are triggered when any of the measured parameters fall to the two lowest levels. All measured data are uploaded into the Easylog Cloud for convenient access to historical data.
$509.30
AUD + GST
$560.23
AUD Inc. GST
pH Electrode with Clogging Prevention System (CPS) and BNC Connector - IC-HI1048B
Product code: IC-HI1048B
The HI1048B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. The CPS technology makes this probe ideal for wine, juice or other samples with solids as they contain substances that can clog other types of probes. Has a spherical tip that provides a larger area for contact for faster and more stable readings. Refillable Electrode (3.5M KCl).
$449.90
AUD + GST
$494.89
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC and Pin Connectors - IC-HI1043P
Product code: IC-HI1043P
The HI1043P is a glass body, refillable, double junction pH electrode with a BNC and pin connector. The pin connector is used to enable the CAL Check function of the HI2221, HI2222, and HI2223 benchtop meters. Has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. Designed specifically for hydrocarbons, paints, solvents, high conductivity samples, strong acids, bases, and for applications that require measuring samples in high temperatures. Its a refillable probe using HI7082 3.5M KCl.
$439.00
AUD + GST
$482.90
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC Connector - IC-HI1043B
Product code: IC-HI1043B
The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
$399.92
AUD + GST
$439.91
AUD Inc. GST
Digital pH/Temp electrode for HI98199 - IC-HI829113
Product code: IC-HI829113
The HI829113 is a digital pH/temperature probe is made for use with the HI98199 portable multiparameter pH, EC, and DO meter. Has a flat tip electrode housed in a titanium metal body. An integrated temperature sensor is located in the tip of the electrode for fast and accurate temperature compensated measurements.
$639.00
AUD + GST
$702.90
AUD Inc. GST
Digital Dissolved Oxygen Probe for HI98199 - IC-HI764103
Product code: IC-HI764103
The HI764103 is a digital dissolved oxygen probe with a built-in temperature sensor for the Hanna HI98199 portable meter. Contains a built-in microchip that stores sensor type, serial number, and calibration information that is automatically detected by the HI98199. Features a silver cathode with a zinc anode, an integrated temperature sensor, and easily replaceable HDPE membrane caps. No warm-up time.
$659.50
AUD + GST
$725.45
AUD Inc. GST
Digital DO probe for edge - IC-HI764080
Product code: IC-HI764080
The HI 764080 is a digital dissolved oxygen electrode with built-in temperature sensor. This ultra-thin, Clark-type polarographic electrode is designed for measuring DO in aqueous solutions and contains a built-in microchip that stores sensor type, serial number, and calibration information. Has a platinum cathode with a silver/silver chloride anode, an integrated temperature sensor, and easily replaceable PTFE membrane caps. With integrated temperature sensor for temperature compensated applications. Designed for use with Hanna’s edge pH/EC/DO meter.
$789.40
AUD + GST
$868.34
AUD Inc. GST
Digital EC probe for Edge - IC-HI763100
Product code: IC-HI763100
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. The HI 763100 is a potentiometric probe with platinum sensors making it suitable for measuring high or low conductivity ranges. Has a builtin microchip that stores calibration data. For Hanna Edge pH/EC/DO meters.
$789.20
AUD + GST
$868.12
AUD Inc. GST
Digital PEI Body, Gel filled, ORP Electrode - IC-HI36200
Product code: IC-HI36200
The HI36200 is a PEI body, single junction ORP electrode with a built-in temperature sensor. This electrode has a single ceramic junction in the outer reference cell and the ORP sensing pin is made with platinum. Features a built-in microchip that stores sensor type, serial number, and calibration information. Features a rugged PEI (polyetherimide) body that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications. With a 3.5 mm connector.
$378.28
AUD + GST
$416.11
AUD Inc. GST
Digital pH/temperature Flat Tip Electrode - IC-HI14140
Product code: IC-HI14140
The HI14140 has a unique open junction design that resists clogging and the probe’s flat tip makes it ideal for pH measurements of skin, paper, food and various surfaces. This probe features a 3.5 mm connector designed exclusively to be used with Hanna Instruments "edge" series pH meters. Flat Tip for Surface Measurements. Uses low temperature (LT) glass, flat tip bulb, glass body, and open junction with viscolene gel electrolyte. 3.5 mm Connector.
$349.50
AUD + GST
$384.45
AUD Inc. GST
EC800 Laboratory Benchtop Conductivity Meter Kit
Product code: IC-EC800
The EC800 Benchtop Conductivity Meter/Tester Kit provides quick and stable conductivity/TDS measurements for advanced applications that requires GLP compliance. Equipped with BPB Conductivity Electrode ensure Quick & Accurate EC measurements in wide ranges (0 to 200 mS/cm). Can store up to 500 data sets. Kit includes bench meter, calibration solutions and electrode holder (holds up to 3 electrodes).
$1,059.80
AUD + GST
$1,165.78
AUD Inc. GST
PH800 Laboratory Benchtop pH Meter Kit
Product code: IC-PH800
The PH800 is a GLP compliant laboratory benchtop pH meter provides quick and stable pH measurements for advance laboratory testing. Includes 201T-F pH/Temperature Combination Electrode that simultaneously measures pH and temperature. Easily shows the health of your current electrode to ensure accurate and stable measurements. Can store up to 500 data sets.
$899.20
AUD + GST
$989.12
AUD Inc. GST
EC700 Benchtop Conductivity Meter Kit
Product code: IC-EC700
The EC700 Benchtop Conductivity Meter/Tester Kit provides quick and stable conductivity/TDS measurements for basic laboratory testing and educational purposes at outstanding cost-effectiveness. Equipped with 2301T-F Combination Conductivity Electrode that measures conductivity and temperature at the same time with an accuracy of +/ 1% F.S. Automatically recognizes 8 types of conductivity standard solutions. Kit includes bench meter, calibration solutions and electrode holder.
$819.10
AUD + GST
$901.01
AUD Inc. GST
PH8500-SB Portable pH Meter Kit for Hydrofluoric and other Strong Acids
Product code: IC-PH8500-SB
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 841 pH Electrode made specifically for measuring strong alkaline solutions and high-temperature solutions. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$989.10
AUD + GST
$1,088.01
AUD Inc. GST
PH8500-HF Portable pH Meter Kit for Hydrofluoric and other Strong Acids
Product code: IC-PH8500-HF
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 831 pH Electrode and MP500 Temperature probe, designed for measuring solutions containing strong acid or hydrofluoric acid. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$989.60
AUD + GST
$1,088.56
AUD Inc. GST
PH8500-BR Portable pH Meter Kit for Beverage Making
Product code: IC-PH8500-BR
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 213 Glass 3-in-1 pH/Temperature Electrode, designed for professional quality control of beverage making from coffee to alcoholic beverages. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$889.10
AUD + GST
$978.01
AUD Inc. GST
PH8500-MS Portable pH Meter Kit for Test Tubes and Small Liquid Samples
Product code: IC-PH8500-MS
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 243-6 Glass pH/Temperature Electrode designed for pH measurement of semi-micro samples (>0.2mL). Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$989.50
AUD + GST
$1,088.45
AUD Inc. GST
PH8500-SL Portable pH Meter Kit for Soil
Product code: IC-PH8500-SL
he Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 553 POM pH Electrode Electrode, the meter tests pH and temperature in a quick and accurate manner for soil samples. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$959.70
AUD + GST
$1,055.67
AUD Inc. GST
PH8500-WW Portable pH Meter Kit for Waste Water Treatment
Product code: IC-PH8500-WW
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 333 pH Electrode, the meter tests pH and temperature in a quick and accurate manner for waste water treatment and monitoring water quality. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$849.50
AUD + GST
$934.45
AUD Inc. GST
PH8500-DP Portable pH Meter Kit for Dairy and Liquid Food
Product code: IC-PH8500-DP
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 823 Glass pH and Temperature Electrode, the meter tests pH and temperature in a quick and accurate manner for dairy products and liquid foods. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$889.50
AUD + GST
$978.45
AUD Inc. GST
PH8500-BS Portable pH Meter Kit for Meat
Product code: IC-PH8500-BS
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 763 Titanium-body Blade Spear pH Electrode, the meter tests pH and temperature in a quick and accurate manner for any types of meat. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc
$1,359.60
AUD + GST
$1,495.56
AUD Inc. GST
PH8500-SS Portable pH Meter Kit for Solid Food
Product code: IC-PH8500-SS
The Apera Instruments PH8500 Portable pH Meter Kit provides reliable pH measurements with various intelligent functions and a durable structure for food samples. This kit is equipped with Apera's high quality LabSen 753 Titanium-body Spear pH Electrode, the meter tests pH and temperature in a quick and accurate manner for solid food and semi-solid samples. Provides accurate measurement (+/- 0.01 pH) with a measurement range of -2.00-19.99 pH. GLP compliant datalogging features for up to 500 records. With several features such as Self-Diagnosis of out-of-range value, electrode invalidation, calibration reminders, etc.
$1,139.10
AUD + GST
$1,253.01
AUD Inc. GST
Pocket IR Brix Meter PAL-HIKARi 33 MINi (Mini watermelon)
Product code: IC-PAL-HIKARi-33-MINi
Pocket-sized Brix refractometer for smaller sized watermelons (13 to 16cm in diameter). Measurement range: 5.0 to 18.0%. The Brix level can be measured without cutting or squeezing; just place the fruit on top of the sensor. With IP64 protection.
$1,510.00
AUD + GST
$1,661.00
AUD Inc. GST
Pocket IR Brix Meter PAL-HIKARi 32 (Watermelon) - IC-PAL-HIKARi-32
Product code: IC-PAL-HIKARi-32
Pocket-sized Brix refractometer for regular sized watermelons (20 to 25cm in diameter). Measurement range: 5.0 to 18.0%. The Brix level can be measured without cutting or squeezing; just place the fruit on top of the sensor. With IP64 protection.
$1,510.00
AUD + GST
$1,661.00
AUD Inc. GST