PoE•X Water Rope Sensor
Product code: MNS-P-C1-WS-WR
The Monnit Power-over-Ethernet (PoE) Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately transmit data to iMonnit.
$640.00
AUD + GST
$704.00
AUD Inc. GST
PoE•X Duct Temperature Sensor
Product code: MNS-P-C1-TS-DT-L08
The Power-over-Ethernet (PoE) Duct Temperature Sensor uses an NTC thermistor with 8 ft. lead wires to accurately measure temperatures in duct work, while maintaining a sealed environment. Can be easily installed and mounted for long term use. It is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the temperature probe, wait for temperature to stabilize, then transmit the temperature data to iMonnit.
$492.00
AUD + GST
$541.20
AUD Inc. GST
PoE•X Low Temperature Sensor
Product code: MNS-P-C1-TS-LT-L03
The Power-over-Ethernet (PoE) Low Temperature Sensor uses a glass coated platinum RTD transducer to accurately measure temperatures from -200°C to +162°C. The Low Temperature Sensor outputs the ambient temperature when a temperature threshold has been crossed.
$665.00
AUD + GST
$731.50
AUD Inc. GST
PoE•X High Temperature Sensor
Product code: MNS-P-C1-TS-HT-L03
The Power-over-Ethernet (PoE) High Temperature Sensor uses a glass coated platinum RTD transducer to accurately measure temperatures from -50 to +370 C. The High Temperature Sensor outputs the ambient temperature and alerts the user when a temperature threshold is crossed.
$541.00
AUD + GST
$595.10
AUD Inc. GST
PoE•X Temperature Sensor
Product code: MNS-P-C1-TS-ST-L03
The Power-over-Ethernet (PoE) Temperature Sensor uses a precision thermistor to accurately measure temperatures from -25 to +125 C.
$492.00
AUD + GST
$541.20
AUD Inc. GST
PoE•X Open-Closed Sensor
Product code: MNS-P-C1-OC-ST
The Power-over-Ethernet (PoE) Open / Closed Sensor uses an external magnetic switch to detect the presence or removal of a trigger magnet. When the sensor detects that the magnet is removed or returned it sends the information to iMonnit.
$442.00
AUD + GST
$486.20
AUD Inc. GST
PoE•X Infrared Motion and Occupancy Sensor
Product code: MNS-P-C1-MS-IR
The Power-over-Ethernet (PoE) Motion Detection (PIR) Sensor detects motion and movement using infrared technology. iMonnit stores all data in the online system where the data can be reviewed and exported as a data sheet or graph. Notifications can be set up through the online system to alert the user when motion has been detected.
$467.00
AUD + GST
$513.70
AUD Inc. GST
PoE•X Dry Contact Sensor
Product code: MNS-P-C1-DC-CF-L03
The Monnit Power-over-Ethernet (PoE) Dry Contact Sensor detects when there is contact between the two wired end points. It can easily be integrated into existing switches or contact plates. When the sensor detects contact between the two end points, it will immediately transmit the data to iMonnit, allowing the user to immediately receive an SMS text or email alert.
$467.00
AUD + GST
$513.70
AUD Inc. GST
PoE•X Humidity Sensor
Product code: MNS-P-C1-HU-RH
The Power-over-Ethernet (PoE) Humidity (RH) Sensor accurately monitors the relative humidity of the air within a room or enclosure. -Power-over-Ethernet ready (injector hardware required). -Can store up to 50,000 messages. -Manage the device and data through an app (No pc required).
$714.00
AUD + GST
$785.40
AUD Inc. GST