LJTick InAmp
Product code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$169.00
AUD + GST
$185.90
AUD Inc. GST
LJTick DigitalOut5V
Product code: IC-LJTick-DigitalOut5V
Converts 3.3V digital outputs to 5V digital outputs. Easily control 5V relays, or interface with a 5V logic device.
$49.00
AUD + GST
$53.90
AUD Inc. GST
LJTick DAC
Product code: IC-LJTick-DAC
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block (e.g. FIO4/FIO5), and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with T-Series devices (T7, T4) and any UD family device (U3/U6/UE9).
$179.00
AUD + GST
$196.90
AUD Inc. GST
LJTick CurrentShunt
Product code: IC-LJTick-CurrentShunt
The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal compatible with the LabJack U3, U6, UE9, T7, or T4. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4.
$120.00
AUD + GST
$132.00
AUD Inc. GST
$11.00
AUD + GST
$12.10
AUD Inc. GST
$36.50
AUD + GST
$40.15
AUD Inc. GST
$11.00
AUD + GST
$12.10
AUD Inc. GST
Graphtec GL840 Case - IC-GL-840-CASE
Product code: IC-GL-840-CASE
Graphtec GL840 Carry Case, plastic with foam insert.
$200.00
AUD + GST
$220.00
AUD Inc. GST
CB37 Terminal Board
Product code: IC-CB37
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
$154.81
AUD + GST
$170.29
AUD Inc. GST
CB25 Terminal Board
Product code: IC-CB25
Provides screw terminal connections for the LabJack U12's 16 extra digital I/O. A screwdriver and DB25 cable are included. For the LabJack U12 only.
$89.00
AUD + GST
$97.90
AUD Inc. GST
CB15 Terminal Board
Product code: IC-CB15
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
$95.09
AUD + GST
$104.60
AUD Inc. GST
B-513 Logic Input/Output cable, 2 metres in length, bare wire end - IC-B-513
Product code: IC-B-513
B-513 Logic Input/Output cable, 2 metres in length, bare wire end.
$175.00
AUD + GST
$192.50
AUD Inc. GST
HOBO MicroRX Station with Solar (Fast Logging)
Product code: RX2102-SP-610-SIM
HOBO MicroRX Station (Solar) with HOBO Link plan, 1min logging/10 min upload - RX2102-SP-610. With a compact size and rugged design, the MicroRX Station offers long-term, reliable environmental monitoring. Configurable station-side alarms provide immediate notification of critical conditions, and Onset’s cloud-based HOBOlink® platform makes it easy to view, access, and share your data. This model comes with a solar panel for extended deployment. The station includes inputs for up to five of Onset’s research-grade plug-and-play sensors, and can be ordered with an additional water level sensor input with integrated flow conversion. Configurable station-side alarms trigger immediate notifications of critical conditions, and Onset’s cloud-based HOBOlink platform makes it easy to view, access, and share data.
$2,213.00
AUD + GST
$2,434.30
AUD Inc. GST
bun Multi - Multi-parameter Logger and Alarm System
Product code: IC-bun-Multi
The bun Multi monitors two out of three paramaters: temperature (in-fluid or out), pressure (liquid or gas) and AC current (non-invasive clamp). It is a cloud-based system and all settingcs can be set through a web-based application on any platform. It sends out email and text message alarms as soon as any measured parameter exceeds or falls below pre-set limits. Appropriate for monitoring HVAC systems, electromotors, engine rooms and any industrialfacility involving power or fluids.
YDOC ML417ADS RTU 4G SDI-12 & Analogue pulse inputs with 5W external solar panel. (Hosting and setup fees included for the first 12 months).
Product code: IC-ML417ADS-5W
The MLN417 is a flexible, powerful RTU which feature a 4G modem for transmission of data over the mobile data network either Telstra's 700 MHz 4G or Vodafone's 900 MHz 4G service. Includes 5W solar panel and Analogue pulse inputs.
$1,780.00
AUD + GST
$1,958.00
AUD Inc. GST
UE9-Pro USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet.
Product code: IC-UE9-Pro
The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities. The UE9-Pro has all the features of the the normal UE9; with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC for applications with higher resolution requirements.
$1,728.00
AUD + GST
$1,900.80
AUD Inc. GST
UE9 USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet
Product code: IC-UE9
The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities.The UE9 is a USB or Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2 analog outputs (12-bit), 23 digital I/O, up to 2 counters, and up to 6 timers.
Graphtec B-569 Rechargeable Lithium-ion battery pack - IC-B-569
Product code: IC-B-569
Graphtec Lithium-ion Battery.
EB37 Experiment Board
Product code: IC-EB37
Just like any breadboard, the EB37 is very useful for testing and validating electronic designs, but it also has a few different power supply rail voltages and breaks out LabJack I/O right next to your design.