Network Testers

Per page:  
Display:  

Product code: IC-R151006
The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare app.
$2,559.80 AUD + GST
$2,815.78 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R171000
SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analogue CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish. Supply power to cameras via PoE/PoE+ (Power over Ethernet) or standard 12V DC power using its internal Li-Ion battery, eliminating the need for external power adapters and injectors.
$1,699.20 AUD + GST
$1,869.12 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R156006
The SignalTEK CT allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates.For installers, this means having a cost-effective way to demonstrate that the copper cabling was installed correctly and is capable of supporting Ethernet applications.
$2,859.00 AUD + GST
$3,144.90 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: XC5090
This tone generator is a highly practical network installation and troubleshooting tool, which features a single/multi tone signal. - 140mm long signal and modular leads - Appropriate as a diagnostic and repair tool for network cables.
$89.90 AUD + GST
$98.89 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-TM-904
The Tenmars TM-904 Flbre Fault Locator is compatible with 2.5mm universal Ferrule connector (FC) for visually identifies and locates faults in fibre optic cabling.
$459.00 AUD + GST
$504.90 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 15th of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-TM-903
The Tenmars TM-903 Multimedia Cable Tester is a hand-held test instrument that lets you verify and troubleshoot LAN cables. Displays graph wire-map, opens, shorts, miss wires, split pairs and the remote ID number, all on one screen.
$359.70 AUD + GST
$395.67 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 15th of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-85-385
The IDEAL Electrical 85-385 CAT6A/6 RJ-45 Feed-Thru Modular Plugs (Card of 50) are single piece 8P8C RJ-45 connectors designed to work with cable conductors ranging from #22 to #24 AWG solid with an overall diameter of 0.040 in. to 0.048 in. per conductor. For insulated conductors of 0.040 in. to 0.048 in. diameter. The single piece Feed-Thru design makes it easier to deal with twisting cables with large conductors. Card of 50.
$69.50 AUD + GST
$76.45 AUD Inc. GST
in stock icon
For a personalised quote, add to cart. Then in the checkout choose create a quote.
each

Product code: IC-AT-6020
Amprobe's newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse.
$1,767.00 AUD + GST
$1,943.70 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-AT-6010
Easily and accurately locate wires, breakers, and fuses with the AT-6010 Advanced Wire Tracer. When the Transmitter is connected to the circuit (Energized or De-energized, up to 600 V AC/DC in Category I through Category III electrical environments), the Receiver easily detects the transmitted signal in the wires or cables behind walls, ceilings and floors.
$1,166.00 AUD + GST
$1,282.60 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-MGKSX1
IDEAL GbE Fibre Kit 1000BASE-SX Fibre Kit, 850nm Multimode
$369.00 AUD + GST
$405.90 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 11th of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-MGKLX2
IDEAL GbE Fibre Kit 1000BASE-LX Fibre Kit, 1320nm Singlemode
$469.30 AUD + GST
$516.23 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 11th of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-85-371
The IDEAL 85-371 Cat5e RJ-45 Modular Plugs feature an open-end feed-thru design that makes connector to cable assembly easy and fast. It also allows verifying conductor order before crimping. These 8P8C plugs feature 50 micro-inch gold plating on contact mating area that provides secure connectivity. They are used with the IDEAL FT-45 crimping tool (30-495) for Cat5e, 100 ohms balanced twisted pair 100 MHz cables. The crimper ensures trimming wires flush with the end-face of the connector.
$139.90 AUD + GST
$153.89 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 15th of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-MGKZX3
IDEAL GbE Fibre Kit 1000BASE-ZX Fibre Kit, 1550nm Singlemode
$1,199.80 AUD + GST
$1,319.78 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 15th of January 2025, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R158004
The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality or other factors. Supports PoE up to 90W (PoE++).
in stock icon
Unfortunately, the R158004 has been discontinued and has been replaced by the  R158005.
each

Product code: IC-R153001
The NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive networks across copper and fibre, helping to pin point and solve networking issues quickly. NaviTEK instantly displays everything you need to know about your network or cabling.
in stock icon
Unfortunately, the R153001 has been discontinued, please consider the  R151006 as an alternative.
each

Product code: XC-5083
This tone generator is a highly practical network installation and troubleshooting tool which features a single/multi tone signal, test leads and a 4 conductor modular cable.
in stock icon
Unfortunately, the XC-5083 has been discontinued, check out our other Network Testers for more options.
each