Flexible Humidity Probe - 0628-0022
Product code: 0628-0022
Flexible humidity probe for measurements in inaccessible places. Can be used with testo 445 and 645 series of meters.
$2,359.30
AUD + GST
$2,595.23
AUD Inc. GST
Scatter Field Moisture Probe - 0636-6160
Product code: 0636-6160
Scatter field probe for fast and damage-free material moisture measurement, with probe cable 1.2 m, f or testo 635-1.
$759.10
AUD + GST
$835.01
AUD Inc. GST
Pressure Dewpoint Probe - 0636-9835
Product code: 0636-9835
Pressure dewpoint probe for measurements in compressed air systems.
$1,949.00
AUD + GST
$2,143.90
AUD Inc. GST
IM521CD Leaf Wetness Sensor
Product code: IM521CD
The Leaf Wetness Sensor measures if the leaves of the crop/culture have been wet, and for how long this event lasted.
$460.00
AUD + GST
$506.00
AUD Inc. GST
pHionics STs ORP (Redox) Sensor with 4-20mA output
Product code: STS2100S-025
The pHionics STs Series™ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring. -Measurement range: -1000 to +1000 mV oxidation-reduction potential (ORP). -Has a narrow diameter (1.9 cm), appropriate for groundwater monitoring applications.
$1,989.20
AUD + GST
$2,188.12
AUD Inc. GST
pHionics STs DO (Dissolved Oxygen) Sensor with 4-20mA
Product code: STS3020S-025
The pHionics STs Series Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required. -0 to 20 mg/L or 0 to 200% saturation depending on scaling with datalogger or RTU. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge).
$2,599.20
AUD + GST
$2,859.12
AUD Inc. GST
pHionics STs pH Sensor with 4 to 20mA output
Product code: STS1014S-025
The pHionics STs Series pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring. -19mm diameter probe while a durable, chemical-resistant housing. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge). -Suitable for groundwater monitoring, wastewater treatment, aquaculture, pollution control, and many others.
$1,889.10
AUD + GST
$2,078.01
AUD Inc. GST
Plug-in humidity/temperature probe - 0572-2151
Product code: 0572-2151
The 0572 2151 is a plug-in humidity/temperature probe is suitable for measuring temperature and relative humidity in storerooms, cold storage areas and work rooms or in air conditioning/ventilation ducts.
$189.30
AUD + GST
$208.23
AUD Inc. GST
Robust Humidity Probe - 0636-2161
Product code: 0636-2161
Temperature and humidity probe for use in refrigeration, air conditioning, air conditioning ducts, exhaust shafts and ventilation. Can be used with testo 635, 435-2 and testo 435-4. Measures material equilibrium moisture content when used with testo 635.
$1,229.70
AUD + GST
$1,352.67
AUD Inc. GST
Thin Humidity Probe (Moisture) - 0636-2135
Product code: 0636-2135
The slim humidity probe measures material moisture via the equilibrium moisture content and can very easily be used in recesses or bore holes thanks to its slim design and remote electronics. Used with testo 635 temperature and moisture meter. Ideal for measuring equilibrium moisture content because of its thin probe (4 mm diameter).
$999.10
AUD + GST
$1,099.01
AUD Inc. GST
Temperature Sensor For GSM Controllers - IC-DS18B20
Product code: IC-DS18B20
This DS18B20 temperature sensor is an add-on accessory for our GSM controllers, see related products, that has temperature channel capacity. It has a temperature range of - 50 to ~ 125 C with an accuracy measurement of 0.5 C The sensor is built in a waterproof steel housing for outdoor or submersible monitoring.The 3-wire shielded cable is approximately 1 m in length and be extended up to 100 m. It is powered from the internal 5 VDC output terminal of the suitable GSM controller.
$89.60
AUD + GST
$98.56
AUD Inc. GST
5 in stock
Temp. & Humidity Sensor For GSM Controllers - IC-CHM-01A
Product code: IC-CHM-01A
This CHM-01A Temp. & Humidity sensor is an add-on accessory for our GSM controllers, see related products, that has humidity channel capacity. It has a humidity range of 0 to 100%RH with an accuracy measurement of +-5% The humidity sensor is intended for indoor monitoring. The 4-wire shielded cable is approximately 1 m in length and be extended up to 100 m. It is powered from the internal 5 VDC output terminal of the suitable GSM controller.
$179.30
AUD + GST
$197.23
AUD Inc. GST