Ultraprobe 15,000 Plus IS Kit (9K)
Product code: UP15000ATEX-COMBO(9K)
An inspection tool package that includes the Ultraprobe 15,000 and the Ultraprobe 9000ATEX. Monitor general work areas using the Ultraprobe 15,000 and the use the Ultraprobe 9000ATEX for hazardous areas. -The Ultraprobe 15,000 for in-field diagnostics, performs on-board spectral analysis, record the sounds of test equipment, measure and record temperature, take photographs with flash, store and manage data. -The Ultraprobe 9000ATEX is sensitive enough to detect 0.127 mm diameter leak at 0.34 bar at a distance of 15 meters.
AD-3253 Ultrasonic Thickness Gauge
Product code: AD-3253
The AD-3253 is an ultrasonic thickness gauge ideal for testing where access to both sides of the material is not available. Surface contact is all that is required. -Low cost, light weight and the easy to operate. -Thickness range of 2 to 200 mm
pHionics STs ORP (Redox) Sensor with 4-20mA output
Product code: STS2100S-025
The pHionics STs Series™ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring. -Measurement range: -1000 to +1000 mV oxidation-reduction potential (ORP). -Has a narrow diameter (1.9 cm), appropriate for groundwater monitoring applications.
$1,989.20
AUD + GST
$2,188.12
AUD Inc. GST
pHionics STs DO (Dissolved Oxygen) Sensor with 4-20mA
Product code: STS3020S-025
The pHionics STs Series Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required. -0 to 20 mg/L or 0 to 200% saturation depending on scaling with datalogger or RTU. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge).
$2,599.20
AUD + GST
$2,859.12
AUD Inc. GST
pHionics STs pH Sensor with 4 to 20mA output
Product code: STS1014S-025
The pHionics STs Series pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring. -19mm diameter probe while a durable, chemical-resistant housing. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge). -Suitable for groundwater monitoring, wastewater treatment, aquaculture, pollution control, and many others.
$1,889.10
AUD + GST
$2,078.01
AUD Inc. GST
USB LogTag with Display and Sensor (140mm tip, 1.5m cable)
Product code: UTRED-16F-ST100T-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 140 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (30mm tip, 3m cable)
Product code: UTRED-16F-ST100S-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 30 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (30mm tip, 1.5m cable)
Product code: UTRED-16F-ST100S-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 30 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (90mm tip, 3m cable)
Product code: UTRED-16F-ST100L-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 65 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (90mm tip, 1.5m cable)
Product code: UTRED-16F-ST100L-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 90 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (65mm tip, 3m cable)
Product code: UTRED-16F-ST100K-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 65 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (65mm tip, 1.5m cable)
Product code: UTRED-16F-ST100K-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 65 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (40mm tip, 3m cable)
Product code: UTRED-16F-ST100J-3
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 40 mm tip, sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Sensor (40mm tip, 1.5m cable)
Product code: UTRED-16F-ST100J-1.5
Temperature data logger with LCD display and visual alerts with sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 40 mm tip, sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Handled Sensor (105mm tip, 3m cable)
Product code: UTRED-16F-ST100H-3
Temperature data logger with LCD display and visual alerts with handled sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 105 mm tip, handled sensor with 3 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display and Handled Sensor (105mm tip, 1.5m cable)
Product code: UTRED-16F-ST100H-1.5
Temperature data logger with LCD display and visual alerts with handled sensor. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Includes a 105 mm tip, handled sensor with 1.5 mm cable.
$209.09
AUD + GST
$230.00
AUD Inc. GST
USB LogTag with Display
Product code: UTRED-16F
Temperature data logger with LCD display and visual alerts. -See the current temperature at a glance with visual alerts if temperature exceeds set threshold. -Easy to install and to use. Doesn't require a separate reader. -Requires a temperature probe to use (sold separately).
$163.64
AUD + GST
$180.00
AUD Inc. GST
Crane Anemometer, Endurance
Product code: Windcrane-Endurance
The Anemometer Endurance has been built with construction and the crane market in mind. Designed and assembled in Scotland, in of the most variable and windiest places on Earth to endure the heavy requirements of cranes and heavy lifting. -Compatible with WINDCRANE system and also works with most of dataloggers, PLCs and cranes. -Uses a dry contact signal that can tolerate up to 24Vdc.
$535.00
AUD + GST
$588.50
AUD Inc. GST
HI9810392 HALO2 pH Meter for Chocolate
Product code: HI9810392
Wireless pH tester for measuring the pH of chocolate. -The pH electrode was built to provide stable measurement of pH during the chocolate making process. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.40
AUD + GST
$285.34
AUD Inc. GST
HI9810362 HALO2 pH Meter for Meat
Product code: HI9810362
Wireless pH tester for measuring the pH of meat. -The pH electrode was built to provide stable measurement of pH during meat processing. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.30
AUD + GST
$285.23
AUD Inc. GST
HI9810322 HALO2 pH Meter for Cheese
Product code: HI9810322
Wireless pH tester for measuring the pH of cheese. -The pH electrode was built to provide stable measurement of pH during the processing steps of cheese manufacturing to meet food-hygiene and Hazard Analysis Critical Control Point (HACCP) regulations. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.50
AUD + GST
$285.45
AUD Inc. GST
HI9810342 HALO2 pH Meter for Milk
Product code: HI9810342
Wireless pH tester for measuring the pH of milk. -The pH electrode was built to provide stable measurement of pH during the milk production process. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.30
AUD + GST
$285.23
AUD Inc. GST
HI9810332 HALO2 pH Meter for Wine
Product code: HI9810332
Wireless pH tester for measuring the pH of wine. -The pH electrode was built to provide stable pH measurement during each step of the winemaking process: pre-fermentation, fermentation, post-fermentation, and bottling. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.50
AUD + GST
$285.45
AUD Inc. GST
HI9810372 HALO2 pH Meter for Skin & Scalp
Product code: HI9810372
Wireless pH tester for measuring the pH of skin and scalp. -The pH electrode with a flat tip was specifically designed to provide stable measurement for human skin surfaces and hair scalp. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.90
AUD + GST
$285.89
AUD Inc. GST
HI9810412 HALO2 pH Meter for Lab
Product code: HI9810412
Wireless pH tester for general laboratory applications. -Recommended for users that prefer a low-maintenance laboratory-grade pH electrode. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$279.50
AUD + GST
$307.45
AUD Inc. GST
HI9810402 HALO2 pH Meter for Lab (Refillable)
Product code: HI9810402
Wireless pH tester for measurements in samples that would be a challenge for standard design pH electrodes. -With specialized, refillable, glass electrode for spot checking pH in laboratories. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.10
AUD + GST
$285.01
AUD Inc. GST
MT1003 TRMS Industrial Multimeter with TFT, CATIV, 600V
Product code: MT1003
Heavy duty True RMS Industrial Digital Multimeter with TFT color LCD display, provides fast A/D converting sampling time, high accuracy, built-in data logging and Trend Capture features. -AC, ACV+DCV True-RMS measurements. -Logging function with Trend Capture for easy review of logged data.
$529.40
AUD + GST
$582.34
AUD Inc. GST
MT1005 TRMS Industrial Multimeter with TFT & Bluetooth, CATIV, 600V
Product code: MT1005
Heavy duty True RMS Industrial Digital Multimeter with TFT color LCD display, provides fast A/D converting sampling time, high accuracy, built-in data logging and Trend Capture features. -AC, ACV+DCV True-RMS measurements. -With Bluetooth for faster data transfer. -Logging function with Trend Capture for easy review of logged data.
$569.80
AUD + GST
$626.78
AUD Inc. GST
MT565 True RMS Multimeter and Insulation Continuity Tester
Product code: MT565
The MT565 combines a digital insulation tester with an insulation tester in one handy unit. -Measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle. - 5 insulation test ranges (50V, 100V, 250V, 500V, 1000V). -Built with IP65 waterproof housing.
$849.40
AUD + GST
$934.34
AUD Inc. GST
True RMS Thermal Multimeter
Product code: MT2005
Professional True RMS industrial digital multimeter with thermal and infrared imager. -With 80 x 80 Thermal Imager, and TFT color LCD display. -Infrared Thermal Imager offers you non invasive measurements of potential hot spots. -With Bluetooth and IP65 protection.
$1,719.40
AUD + GST
$1,891.34
AUD Inc. GST