MW401 PRO Standard Portable TDS Meter
Product code: MW401-PRO
The MW401-PRO is a TDS portable meter designed specifically for agricultural and educational purposes. -Range of 0 to 1990 mg/L (ppm) with a 10 mg/L resolution. -Supplied complete with TDS probe with 1 meter cable and calibration solution.
$269.80
AUD + GST
$296.78
AUD Inc. GST
MW302 Standard Portable Conductivity Meter
Product code: MW302
The MW302 is a conductivity portable meter designed specifically for agricultural purposes. -Range of 0.0 to 10.0 mS/cm with a 0.1 mS/cm resolution. -Supplied complete with Conductivity probe with 1 meter cable and calibration solution.
$269.90
AUD + GST
$296.89
AUD Inc. GST
MW301 Standard Portable Conductivity Meter
Product code: MW301
The MW301 is a conductivity portable meter designed specifically for agricultural purposes. -Range of 0 to 1999 uS/cm with a 1 uS/cm resolution. -Supplied complete with Conductivity probe with 1 meter cable and calibration solution.
$269.50
AUD + GST
$296.45
AUD Inc. GST
MC510 PRO ORP Controller
Product code: MC510
The Milwaukee MC510 PRO ORP controller automatically measures and adjust ORP levels based on your required parameters. -Automatically monitors and fine-tunes the ORP level based on your desired range. -Accurate up to +/- 5 mV with two point manual calibration. -Common uses are nutrient tanks, aquariums, pools, spas and other water quality monitoring uses. This meter is normally priced at $389.70+GST!
$349.00
AUD + GST
$383.90
AUD Inc. GST
1 in stock
MC122 PRO pH Controller
Product code: MC122
The Milwaukee MC122 PRO pH controller automatically measures and adjust pH levels based on your required pH parameters. -Automatically monitors and fine-tunes the pH level based on your desired range. -Accurate up to +/- 0.2 pH with two point manual calibration. -Common uses are nutrient tanks and aquariums.
$309.10
AUD + GST
$340.01
AUD Inc. GST
Tramex Concrete Determinator Inspector Kit
Product code: CDIK
The complete kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. - Includes the Tramex CMEX5 digital concrete moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. - The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 100mm, Diameter 19mm. -Also reusable plug-in Hygro-i2 RH probes for in-situ testing of concrete - Comes with an infrared surface thermometer gives surface temperature and dew point conditions when used in conjunction with the CMEX5 hygrometer.
$3,181.818
AUD + GST
$3,500.00
AUD Inc. GST
Tramex Concrete Determinator Tech Kit
Product code: CDTK
A compact kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. -Includes the Tramex CMEX5 digital concrete moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. -The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 100mm, Diameter 19mm.
$2,636.363
AUD + GST
$2,900.00
AUD Inc. GST
1500L Premium Lab Refrigerator with Glass Doors
Product code: TLR-1500-3-GD
Specialty refrigerator to accommodate the requirements of medical centers, hospitals and universities where lab samples are required to be stored safely. -1500L capacity with three glass doors. -Digital display incorporates hi and low temperature alarms, which emit visual and audible signals to warn the operator of an alarm condition.
$11,113.00
AUD + GST
$12,224.30
AUD Inc. GST
440L Laboratory Refrigerator with Glass Door
Product code: TLR-440-1-GD
Laboratory refrigerator for general laboratory requirements for storing and cooling non-critical products. -440L capacity with glass doors. -Temperature is precisely controlled electronically between +4 and +10 C in ambient up to 32 C. -Made with c olorbond steel exterior and white interior complete with stainless steel floor.
$5,833.00
AUD + GST
$6,416.30
AUD Inc. GST
200L Laboratory Refrigerator with Solid Door
Product code: TLR-200-1-SD
Laboratory refrigerator for general laboratory requirements for storing and cooling non-critical products. -200L capacity with a solid door. -Temperature is precisely controlled electronically between +4 and +10 C in ambient up to 32 C. -Have a powder coated metal exterior, and powder coated aluminum interior.
$3,680.00
AUD + GST
$4,048.00
AUD Inc. GST
200L Laboratory Refrigerator with Glass Door
Product code: TLR-200-1-GD
Laboratory refrigerator for general laboratory requirements for storing and cooling non-critical products. -200L capacity with glass doors. -Temperature is precisely controlled electronically between +4 and +10 C in ambient up to 32 C. -Have a powder coated metal exterior, and powder coated aluminum interior.
$3,680.00
AUD + GST
$4,048.00
AUD Inc. GST
145L Laboratory Refrigerator with Solid Door
Product code: TLR-145-1-SD
Laboratory refrigerator for general laboratory requirements for storing and cooling non-critical products. -145L capacity with solid doors. -Temperature is precisely controlled electronically between +4 and +10 C in ambient up to 32 C. -Have a powder coated metal exterior, and powder coated aluminum interior.
$2,490.00
AUD + GST
$2,739.00
AUD Inc. GST
145L Laboratory Refrigerator with Glass Door
Product code: TLR-145-1-GD
Laboratory refrigerator for general laboratory requirements for storing and cooling non-critical products. -145L capacity with glass doors. -Temperature is precisely controlled electronically between +4 and +10 C in ambient up to 32 C. -Have a powder coated metal exterior, and powder coated aluminum interior.
$2,490.00
AUD + GST
$2,739.00
AUD Inc. GST
280L Fan Forced and Gravity Convection Incubator with IPD
Product code: TI-280F
Digital laboratory incubator with 280L capacity. - Users have the ability to change between fan forced or gravity convection. -Includes 5 removable open wire chrome plated shelves. -Built with Inner polycarbonate door. -Temperature accuracy at +/- 0.25 C.
$5,770.00
AUD + GST
$6,347.00
AUD Inc. GST
210L Fan Forced and Gravity Convection Incubator with IPD
Product code: TI-210F
Digital laboratory incubator with 210L capacity. - Users have the ability to change between fan forced or gravity convection. -Includes 4 removable open wire chrome plated shelves. -Built with Inner polycarbonate door -Temperature accuracy at +/- 0.25 C.
$4,320.00
AUD + GST
$4,752.00
AUD Inc. GST
80L Fan Forced and Gravity Convection Incubator
Product code: TI-80F
Digital laboratory incubator with 80L capacity. - Users have the ability to change between fan forced or gravity convection. -Includes 4 removable open wire chrome plated shelves. -Temperature accuracy at +/- 0.25 C.
$3,360.00
AUD + GST
$3,696.00
AUD Inc. GST
20L Fan Forced and Gravity Convection Incubator
Product code: TI-20F
Digital laboratory incubator with 20L capacity. - Users have the ability to change between fan forced or gravity convection. -Includes 2 removable open wire chrome plated shelves. -Temperature accuracy at +/- 0.25 C.
$2,790.00
AUD + GST
$3,069.00
AUD Inc. GST
80L Fan Forced Glass Drying Oven
Product code: TGD-80F
Premium high air flow moisture removal oven with digital temperature control. -Designed for drying washed glassware products. -Have a high air flow rate to ensure effective drying and chamber heating. -Comes with 2 perforated shelving to prevent fragile items tumbling over.
$5,690.00
AUD + GST
$6,259.00
AUD Inc. GST
700L Fan Forced Dehydrating Oven
Product code: TD-700F
Premium high air flow moisture removal oven with digital controls. -Features a unique horizontal air flow system which ensures dry heated air is directed across each shelf space for effective drying of samples anywhere inside the oven. -Adjustable air and exhaust outlet and shelves.
$10,410.00
AUD + GST
$11,451.00
AUD Inc. GST
630L Fan Forced Double Door Dehydrating Oven
Product code: TD-630F
High air flow moisture removal oven with digital temperature control with double doors. -Large capacity (630 liters). -Features a unique horizontal air flow system which ensures dry heated air is directed across each shelf space for effective drying of samples anywhere inside the oven. -Adjustable air and exhaust outlet and shelves.
$10,740.00
AUD + GST
$11,814.00
AUD Inc. GST
500L Fan Forced Dehydrating Oven
Product code: TD-500FM
Moisture removal dehydrating oven for macadamias. - Feature a high air flow rate to ensure effective drying and chamber heating. -With an adjustable air inlet and an adjustable air exhaust vent supply fresh air into the chamber while removing moist air from the chamber.
$9,240.00
AUD + GST
$10,164.00
AUD Inc. GST
12L Refrigerated Water Bath with TU3
Product code: TWBRC-12
Low temperature refrigerated water bath with digital temperature control with 12L capacity. -Wide temperature control range -5ºC to +80ºC. -Built in heating and cooling system.
$6,790.00
AUD + GST
$7,469.00
AUD Inc. GST
TB7 Tipping Bucket Rain Gauge (0.2 mm)
Product code: TB7-0.2
High-quality tipping bucket rain gauge for measuring rainfall in remote and unattended locations when used in conjunction with HyQuest Solutions’ Undercover data logger or a smart communication module. With Teflon bucket with a capacity of 0.2 mm. Minimal maintenance required and built with a robust design for all environments. In-built bird guard.
$635.00
AUD + GST
$698.50
AUD Inc. GST
TB3 Tipping Bucket Rain Gauge (0.1 Titanium)
Product code: TB3-0.1T
High-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Metal Tipping Bucket Rain Gauge-Teflon-impregnated Bucket-0.1 mm. Built with an integrated syphon that delivers high levels of accuracy across a broad range of rainfall intensities. Consists of a robust powder-coated aluminum enclosure, an aluminum base, and stainless steel finger filter and fasteners.
$1,715.00
AUD + GST
$1,886.50
AUD Inc. GST
Replacement hood 915 x 915 mm - for testo 420
Product code: 0554-4203
Replacement hood (915 x 915 mm) for mounting on the testo 420 volume flow hood for measurements at air inlets and outlets. -With integrated flow straightener for high-precision measurement results. -Inner dimensions 890 x 890 mm.
$589.40
AUD + GST
$648.34
AUD Inc. GST
Testo 420 - Differential pressure measuring instrument
Product code: 0560-0420
The testo 420 differential pressure measuring instrument is suitable for accurate differential pressure measurement up to 120 Pa, e.g. when checking filters in HVAC systems. -Calculate flow velocity and volume flow using a Pitot tube. -Handy instrument featuring a large display and user-friendly menu guidance. -Save measurement data for analysis and documentation.
$1,939.50
AUD + GST
$2,133.45
AUD Inc. GST
HI73128 Replacement Tool for Electrode Removal
Product code: HI73128
HI73128 is a replacement tool for electrode removal on select Hanna waterproof testers.
$49.00
AUD + GST
$53.90
AUD Inc. GST
TROTEC BO22 Mini Videoscope
Product code: BO22
The compact solution for visually inspecting poorly accessible areas with the option to take photos or videos for documentation purposes. -Light and compact with carry case. -3 inch digital LCD colour display. -Memory function to take individual photographs or record complete video sequences. -Water-proof camera head (IP67 type of protection).
$359.30
AUD + GST
$395.23
AUD Inc. GST
Testo 477 LED stroboscope
Product code: 0563-4770
The testo 477 LED stroboscope makes stunningly fast movements look as if they are taking place in slow motion. This allows you to check and inspect machines and systems while they are still running, and measure speeds of up to 300 000 rpm. -Extremely high measurement range: up to 300 000 flashes per minute (fpm). -Very high illumination: up to 4800 Lux. -Long operating times: battery power for up to 5 h. -Trigger input and output for connectivity to external systems and control via external sensor.
$1,599.60
AUD + GST
$1,759.56
AUD Inc. GST
Set testo 830-T4 - Infrared thermometer
Product code: 0563-8314
The testo 830-T4 infrared thermometer in a practical set can be used universally and enables you to measure surface temperatures in trade and industry quickly and precisely, both on a non-contact basis and with surface contact. -2-point laser marking for precise display of the measuring point -30:1 optics also enable the accurate measurement of small objects at a distance -Easy to handle gun-style design -Limit value control with min./max. function along with visual and acoustic signal
$479.20
AUD + GST
$527.12
AUD Inc. GST