Vernier Caliper 300mm/12in (0.02mm & 0.001in Grad) - 1251MEA-12/300
Product code: 1251MEA-12/300
The Starrett 125 Vernier Caliper includes metric/inch readings, 0-12 inch/300mm caliper in plastic case, 0.02mm and 0.001in Grad.
$399.30
AUD + GST
$439.23
AUD Inc. GST
Vernier Caliper 200mm/8in (0.02mm & 0.001in Grad) - 125MEA-8/200
Product code: 125MEA-8/200
The Starrett 125 Vernier Caliper includes metric/inch readings, 0-8 inch/200mm caliper in plastic case, 0.02mm and 0.001in Grad.
$169.70
AUD + GST
$186.67
AUD Inc. GST
Vernier Caliper 150mm/6in (0.02mm & 0.001 in Grad) - 125MEA-6/150
Product code: 125MEA-6/150
The Starrett 125 Vernier Caliper includes metric/inch readings, 0-6 inch/150mm caliper in plastic case, 0.02mm and 0.001in Grad.
$99.30
AUD + GST
$109.23
AUD Inc. GST
Defelsko PosiTector 6000 F3 Advanced Coating Thickness Gauge
Product code: F3-G
The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1500 um. With Wifi and Bluetooth technology and increased storage space (up to 250,000 readings). Made for measuring dry film thickness (DFT) on ferrous substrates; can be used for almost any application of measuring non-magnetic coatings on steel, iron and other ferrous substrates. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$1,829.10
AUD + GST
$2,012.01
AUD Inc. GST
Defelsko PosiTector 6000 F0S3 Advanced Coating Thickness Gauge
Product code: F0S3-G
The rugged, fully electronic Advanced PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1150 um. With Wifi and Bluetooth technology and increased storage space (up to 250,000 readings). Built specifically for measuring on small parts, hard-to-reach areas, or close to edges. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$2,439.40
AUD + GST
$2,683.34
AUD Inc. GST
Defelsko PosiTector 6000 F0S1 Standard Coating Thickness Gauge
Product code: F0S1-G
The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1150 um. Built specifically for measuring on small parts, hard-to-reach areas, or close to edges. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$1,739.00
AUD + GST
$1,912.90
AUD Inc. GST
Defelsko PosiTector 200 D3 Advanced Coating Thickness Gauge
Product code: 200D3-G
The Defelsko PosiTector 200 D3 Advanced Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. It has Bluetooth and WiFi connectivity and storage for 250,000 readings. Advanced PosiTector meters have Bluetooth and Wifi connectivity and can measure up to three layers with graphics. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200C type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 7600 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$5,099.20
AUD + GST
$5,609.12
AUD Inc. GST
Defelsko PosiTector 200 B3 Advanced Coating Thickness Gauge
Product code: 200B3-G
The Defelsko PosiTector 200 B3 Advanced Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. It has Bluetooth and WiFi connectivity and storage for 250,000 readings. Advanced PosiTector meters have Bluetooth and Wifi connectivity and can measure up to three layers with graphics. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 13 - 1000 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$4,409.70
AUD + GST
$4,850.67
AUD Inc. GST
Defelsko PosiTector 200 B1 Standard Coating Thickness Gauge
Product code: 200B1-G
The Defelsko PosiTector 200 B1 Standard Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 13 - 1000 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$3,639.70
AUD + GST
$4,003.67
AUD Inc. GST
PosiTest G Magnetic Coating Thickness Gauge (0-2000um) - POSITESTG
Product code: POSITESTG
Easy to use magnetic pull-off thickness gauge measuring electroplating, thin paint films, phosphating on steel. Permanently calibrated. DeFelsko PosiTest G measurement range: 0 to 200um. Complies with the requirements of Australian Standard AS3894.3-2002.
$549.20
AUD + GST
$604.12
AUD Inc. GST
UbiBot Smart Leak Detector LD1 (WiFi and Ethernet) - IC-LD1-AETH2L
Product code: IC-LD1-AETH2L
The UbiBot LD1 is an IoT leak detector that monitors and identifies liquid leaks. This model has both Wifi and Ethernet connectivity. Built with a sensisitive, durable and fire-resistant water detection cable. Triggers an audible and visual alarm immediately and display the location of the leakage on the LCD screen in real time. Has a disconnect alarm notification in the case of cable failure.
$319.20
AUD + GST
$351.12
AUD Inc. GST
UbiBot Smart Leak Detector LD1 - IC-LD1-A2L
Product code: IC-LD1-A2L
The UbiBot LD1 is an IoT leak detector that monitors and identifies liquid leaks. Built with a sensitive, durable and fire-resistant water detection cable. Triggers an audible and visual alarm immediately and display the location of the leakage on the LCD screen in real time. Has a disconnect alarm notification in the case of cable failure.
$289.70
AUD + GST
$318.67
AUD Inc. GST
PoE Pro Tester - IC-R158006
Product code: IC-R158006
The PoE Tester is a multifunction tool that identifies the Class of the PoE source, injector type and power available to a PoE device regardless of cable length, cable quality or other factors. Identifies the PoE source, class, IEEE standard and power available during installation, troubleshooting or maintenance. Test results are stored in real-time on the free AnyWARE mobile app and are seamlessly uploaded to AnyWARE Cloud where professional PDF reports are generated. Also detects cabling issues and can troubleshoot devices up to 90W.
$1,369.20
AUD + GST
$1,506.12
AUD Inc. GST
NAVITEK NT PLUS - IC-R151005
Product code: IC-R151005
The new NaviTEK NT Plus is a network tester for troubleshooting and maintenance of active and passive copper networks with touch screen. Has an autotest button that performs a suite of network tests (Ping, DNS, Gateway, Traceroute). Network Probe provides detailed port and network information of each device. Internal memory for 5000 test reports.
$2,259.00
AUD + GST
$2,484.90
AUD Inc. GST
NAVITEK NT Pro Bundle - IC-NTEK-KIT
Product code: IC-NTEK-KIT
This bundle includes the NaviTEK NT Pro for troubleshooting and maintenance of active and passive copper and fiber networks. It includes active remotes and amplifier probe. The NaviTEK NT Pro performs tests for copper cablings and networks with a fiber optic cable interface. Provides PoE/PoE+ detection with load test. Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan.
$2,999.40
AUD + GST
$3,299.34
AUD Inc. GST
R164061 FiberTEK III LC Adapter Kit - IC-R164061
Product code: IC-R164061
The multimode R164061 accessory kits allow one-jumper calibration when testing cabling systems with LC connectors. The kits utilize a precision LC adapter for the receive (Rx) port of each FiberTEK III module and a SC-LC test cord for the transmit (Tx) port. One-jumper calibration recommended by most standards for field testing. Procedure is the same for MM and SM testing.
$12,569.90
AUD + GST
$13,826.89
AUD Inc. GST
FiberTEK IV-MM LED and SM Laser Kit - IC-R164010
Product code: IC-R164010
FiberTEK IV combination MM/SM kit with LED MM sources and laser SM sources. FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing. Flashes red to warn of light from other sources, green when linked to FiberTEK IV. Red laser light source to visually pinpoint faults and locate fiber ports. Supports all common connector types. Compatible with all LanTEK IV models.
$18,299.50
AUD + GST
$20,129.45
AUD Inc. GST
LanTEK IV-S 3000MHz Cable Certifier (With PL/CL Adapters) - IC-R163009
Product code: IC-R163009
The LanTEK IV-S R163009 is a 3000MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$18,299.30
AUD + GST
$20,129.23
AUD Inc. GST
LanTEK IV-S 500MHz Cable Certifier (With PL/CL Adapters) - IC-R163008
Product code: IC-R163008
The LanTEK IV-S R163008 is a 500MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$16,559.80
AUD + GST
$18,215.78
AUD Inc. GST
pH Electrode with Clogging Prevention System (CPS) and BNC Connector - IC-HI1048B
Product code: IC-HI1048B
The HI1048B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. The CPS technology makes this probe ideal for wine, juice or other samples with solids as they contain substances that can clog other types of probes. Has a spherical tip that provides a larger area for contact for faster and more stable readings. Refillable Electrode (3.5M KCl).
$449.90
AUD + GST
$494.89
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC and Pin Connectors - IC-HI1043P
Product code: IC-HI1043P
The HI1043P is a glass body, refillable, double junction pH electrode with a BNC and pin connector. The pin connector is used to enable the CAL Check function of the HI2221, HI2222, and HI2223 benchtop meters. Has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. Designed specifically for hydrocarbons, paints, solvents, high conductivity samples, strong acids, bases, and for applications that require measuring samples in high temperatures. Its a refillable probe using HI7082 3.5M KCl.
$439.00
AUD + GST
$482.90
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC Connector - IC-HI1043B
Product code: IC-HI1043B
The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
$399.92
AUD + GST
$439.91
AUD Inc. GST
Digital pH/Temp electrode for HI98199 - IC-HI829113
Product code: IC-HI829113
The HI829113 is a digital pH/temperature probe is made for use with the HI98199 portable multiparameter pH, EC, and DO meter. Has a flat tip electrode housed in a titanium metal body. An integrated temperature sensor is located in the tip of the electrode for fast and accurate temperature compensated measurements.
$639.00
AUD + GST
$702.90
AUD Inc. GST
Digital Dissolved Oxygen Probe for HI98199 - IC-HI764103
Product code: IC-HI764103
The HI764103 is a digital dissolved oxygen probe with a built-in temperature sensor for the Hanna HI98199 portable meter. Contains a built-in microchip that stores sensor type, serial number, and calibration information that is automatically detected by the HI98199. Features a silver cathode with a zinc anode, an integrated temperature sensor, and easily replaceable HDPE membrane caps. No warm-up time.
$659.50
AUD + GST
$725.45
AUD Inc. GST
Digital DO probe for edge - IC-HI764080
Product code: IC-HI764080
The HI 764080 is a digital dissolved oxygen electrode with built-in temperature sensor. This ultra-thin, Clark-type polarographic electrode is designed for measuring DO in aqueous solutions and contains a built-in microchip that stores sensor type, serial number, and calibration information. Has a platinum cathode with a silver/silver chloride anode, an integrated temperature sensor, and easily replaceable PTFE membrane caps. With integrated temperature sensor for temperature compensated applications. Designed for use with Hanna’s edge pH/EC/DO meter.
$789.40
AUD + GST
$868.34
AUD Inc. GST
Digital EC probe for Edge - IC-HI763100
Product code: IC-HI763100
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. The HI 763100 is a potentiometric probe with platinum sensors making it suitable for measuring high or low conductivity ranges. Has a builtin microchip that stores calibration data. For Hanna Edge pH/EC/DO meters.
$789.20
AUD + GST
$868.12
AUD Inc. GST
Digital PEI Body, Gel filled, ORP Electrode - IC-HI36200
Product code: IC-HI36200
The HI36200 is a PEI body, single junction ORP electrode with a built-in temperature sensor. This electrode has a single ceramic junction in the outer reference cell and the ORP sensing pin is made with platinum. Features a built-in microchip that stores sensor type, serial number, and calibration information. Features a rugged PEI (polyetherimide) body that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications. With a 3.5 mm connector.
$378.28
AUD + GST
$416.11
AUD Inc. GST
Digital pH/temperature Flat Tip Electrode - IC-HI14140
Product code: IC-HI14140
The HI14140 has a unique open junction design that resists clogging and the probe’s flat tip makes it ideal for pH measurements of skin, paper, food and various surfaces. This probe features a 3.5 mm connector designed exclusively to be used with Hanna Instruments "edge" series pH meters. Flat Tip for Surface Measurements. Uses low temperature (LT) glass, flat tip bulb, glass body, and open junction with viscolene gel electrolyte. 3.5 mm Connector.
$349.50
AUD + GST
$384.45
AUD Inc. GST
EC800 Laboratory Benchtop Conductivity Meter Kit
Product code: IC-EC800
The EC800 Benchtop Conductivity Meter/Tester Kit provides quick and stable conductivity/TDS measurements for advanced applications that requires GLP compliance. Equipped with BPB Conductivity Electrode ensure Quick & Accurate EC measurements in wide ranges (0 to 200 mS/cm). Can store up to 500 data sets. Kit includes bench meter, calibration solutions and electrode holder (holds up to 3 electrodes).
$1,059.80
AUD + GST
$1,165.78
AUD Inc. GST
EC700 Benchtop Conductivity Meter Kit
Product code: IC-EC700
The EC700 Benchtop Conductivity Meter/Tester Kit provides quick and stable conductivity/TDS measurements for basic laboratory testing and educational purposes at outstanding cost-effectiveness. Equipped with 2301T-F Combination Conductivity Electrode that measures conductivity and temperature at the same time with an accuracy of +/ 1% F.S. Automatically recognizes 8 types of conductivity standard solutions. Kit includes bench meter, calibration solutions and electrode holder.
$819.10
AUD + GST
$901.01
AUD Inc. GST