Fast-Action Surface Probe With Sprung Thermocouple
Product code: IC-0602-0993
Fast-action surface probe with a bent thermocouple strip to use for uneven surfaces. Shirt term measurng range up to 500 C and -60 to +300 C for the type k thermocouple.
$339.60
AUD + GST
$373.56
AUD Inc. GST
External Input Cable-2.5-Stereo 0-2.5Vdc
Product code: IC-CABLE-2.5-STEREO
The CablE-2.5-STEREO is an external input cable for indoor use compatible with HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs.
$44.00
AUD + GST
$48.40
AUD Inc. GST
External DC Power Cable for RX3000 - CABLE-RX-PWR
Product code: CABLE-RX-PWR
External DC Power Cable for RX3000
$89.20
AUD + GST
$98.12
AUD Inc. GST
Efficient, rugged air probe, Pt100 - IC-0609 1773
Product code: IC-0609-1773
Efficient, rugged air probe, Pt100
$199.60
AUD + GST
$219.56
AUD Inc. GST
Efficient and fast-action immersion probe - IC-0602-0593
Product code: IC-0602-0593
Efficient, water proof, TC Type K, fast-action immersion probe. With a measuring range of 60 to +1000 C, 300 mm in length, 1.5 mm circumference.
$229.10
AUD + GST
$252.01
AUD Inc. GST
testo 0636 9735 Humidity/Temperature probe
Product code: IC-0636-9735
Humidity/temperature probe (Ø 12 mm) with 110 cm fixed cable.
$769.10
AUD + GST
$846.01
AUD Inc. GST
5m long PTFE type T bead thermocouple - TPT5
Product code: TPT5
5m long Type T welded tip single shot PTFE thermocouple with miniplug
$149.90
AUD + GST
$164.89
AUD Inc. GST
5m long PTFE type K bead thermocouple - TPK5
Product code: TPK5
5m long type K welded tip single shot PTFE thermocouple with miniplug
$149.40
AUD + GST
$164.34
AUD Inc. GST
5m long fibreglass type T bead thermocouple - TFT5
Product code: TFT5
5m long Type T welded tip single shot fibreglass thermocouple with miniplug
$89.90
AUD + GST
$98.89
AUD Inc. GST
5m long fibreglass type K bead thermocouple - TFK5
Product code: TFK5
5m long type K welded tip single shot fibreglass thermocouple with miniplug
$89.80
AUD + GST
$98.78
AUD Inc. GST
1m 10K NTC thermistor type probe - IC-NTC-PROBE-1900
Product code: IC-NTC-PROBE-1900
The NTC-PROBE-1900 is a 1m 10K NTC thermistor type probe with a range of -40 to +200?C (-40 to +392?F). This probe can be used as an external probe with the EMT 1900 temperature display.
$39.00
AUD + GST
$42.90
AUD Inc. GST
100m Roll of Thermocouple Cable Type K PVC/PVC 7 x 0.2
Product code: IC-TCKPP72
100m Roll of Thermocouple Cable Type K PVC/PVC 7 x 0.2
$210.00
AUD + GST
$231.00
AUD Inc. GST
100m Roll -Cable Type T PVC/PVC 7 x 0.2
Product code: IC-TCTPP72
100m Roll -Cable Type T PVC/PVC 7 x 0.2
$160.00
AUD + GST
$176.00
AUD Inc. GST
10 x Type K thermocouple mini plug connector - 10PLUGMINIK
Product code: 10PLUGMINIK
10 pack of Type K thermocouple plugs
$89.20
AUD + GST
$98.12
AUD Inc. GST
Hobo Temperature Probe with 15,2m Lead - TMC50-HD
Product code: TMC50-HD
Hobo Temperature Probe with 15.2m Lead
$169.70
AUD + GST
$186.67
AUD Inc. GST
PT-100 Cryogenic Temperature Probe (2-wire), 2.5 m cable - IC-50116
Product code: IC-50116
The PT-100 Cryogenic temperature probe provides accurate, stable readings with fast response time over a range of -200 to 400 C, and is therefore well suited to extreme low temperature applications.
$251.00
AUD + GST
$276.10
AUD Inc. GST
Flow Meter -Compressed Air-Systems - Steel Pipes (0.5")
Product code: IC-6200-05S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
PCE-TDS 100HSH+ Flow Meter with Thermometer
Product code: PCE-TDS-100HSH-PLUS
Portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes. -Appropriate for pipes or tubes with a diameter measuring from 20 to 108 mm. -Suggested for measuring homogenous liquids that includes different types of oil, gas, and waste water. -Includes the PCE-T 330 temperature data logger.
HOBOnet 60cm soil moisture and temperature sensor
Product code: IC-RXW-GP4-922
The HOBOnet RXW-GP4-922 Multi-Depth Soil Moisture Sensor is a wireless sensor that works with the HOBOnet system to measure soil moisture and soil temperature at multiple depths with a single probe, for fast and easy installation. -Measures soil moisture along the entire length of each probe segment, resulting in the largest volume of influence per measurement section. -60 cm probe length.
Wireless Sensor with External Temperature Probe
Product code: IC-WTAGEX
Wirelessly monitor temperature with a stainless-steel 3 cm external temperature probe on a 1m cable.
$4.80
AUD + GST
$5.28
AUD Inc. GST
Flow Meter -Compressed Air-Systems -Steel Pipes (1")
Product code: IC-6200-12S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems -Steel Pipes (1")
Product code: IC-6200-10S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems -Aluminum Pipes (40Mm)
Product code: IC-6200-40M
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Steel Pipes (1.5")
Product code: IC-06200-15S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Steel Pipes (0.75")
Product code: IC-6200-07S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Copper Pipes (1.5")
Product code: IC-6200-15C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Copper Pipes (1")
Product code: IC-6200-10C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Copper Pipes (0.75")
Product code: IC-6200-07C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Aluminum Pipes (25Mm)
Product code: IC-6200-25M
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.